Mark this thread as Unsold
Parting out 672hp Supercharged C63 AMG (W204)
#1
Member
Thread Starter
Parting out Weistec Stage 2 Supercharged C63 AMG (W204)
Hi there,
I sadly parted out my 2013 C63 AMG and have some quality performance parts available for sale, which may be of interest to some of you. I have pictures which I can send to anyone sending me a PM request.
x C63 AMG Weistec headers M156 engine
Please don't compare these to other brands. You get what you pay for and this is particularly true for these.
Simply put, they are the best C63 headers out there in terms of sound, fitment, performance and heat management. It took a long time for Weistec to release long tube headers for the C63 AMG but their R&D is top notch and above the competition.
Included with the exhaust manifolds are 3” Stainless Steel Midpipes, and a 3” Stainless Steel X Pipe.
Bolt on installation that retains the factory resonator and mufflers.
Price: $4,200 CAD ($3,142 USD as of March 26th exchange rate) + shipping
x Weistec M156 High Flow Cats C63
3 Inch Inlet and Outlet
200 Cell Construction
Minimal Flow Restriction
Reduces Tailpipe Odors + Cleaner emissions
Price: $1,250 CAD ($935 USD as of March 26th exchange rate) + shipping
x KW V3 Dynamic Damping Control (DDC) coilovers
KW V3 DDC coilovers with ECU option of using KW's App control + individual set ups in a push of a button.
The KW DDC coilovers are part of the KW iSuspension program - the intelligent suspension solution for vehicles without factory adaptive suspension.
These combine the advantages of an adaptive damping system with a vehicle-specific aftermarket suspension solution.
Lowering can be done via the composite spring collar on the shock body or on the height adjustable rear perch in the rear of the vehicle.
-dirt-resistant trapezoid thread and the composite collar
-retrofit electronic damper adjustment
-3 damping setups: Comfort / Sport / Sport+
-operation by retrofit button or optional App
-create personalized setups with the KW DDC App
The coilovers with this electronically controlled dampers enable an intelligent suspension setup via App-control.
This allows you to upgrade your car with an adaptive damper control, and to have the option to adjust via the KW DDC App to suit your driving style. You do not need any tools to physically adjust the dampers!
The free KW DDC KW App in combination with our optional W-LAN module allows you to customize your own damper setup instantaneously.
This is an amazing coilovers set for our cars for both use on the roads and at the track.
Price: $4,650 CAD ($3,478 USD as of March 26th exchange rate) + shipping
x 4 RAYS Volk ZE40 Matte Blue Gunmetal + 4 TOYO R888
*****RAYS Volk ZE40 Matte Blue Gunmetal*****
Mint condition
No stratches, dings, dents or anything - gorgeous
Front:
19x8.5 5x112 ET44
Rear:
19x9.5 5x112 ET49
*****Wrapped in Toyo Tires Proxes R888*****
Front:
245/35 19
Rear:
265/30 19
Heat Cycled for better performance and durability
Mounted & Balanced 19"
This set has not seen track use = almost new tires (used for a month on public roads)
This tire and wheel package comes with the following EXTRAS:
- M14x1.5 27mm Neon Chrome Conical Seat Lug Bolt (Pack of 20)
- Volk Racing ZE40 Center Cap - Matte Blue Gunmetal (worth $75 a piece)
- Volk Valve stems with Volk valve stem caps
- 2 sets of 4 centering rings
- free set of 4 Toyo Proxes R888 tire lettering
Price: $5,990 CAD ($4,480 USD as of March 26th exchange rate) + shipping
x C63 AMG Stage 2 M156 Weistec Supercharger System
672 HORSEPOWER, 662 FT-LB OF TORQUE (with appropriate high flow exhaust system)
2.3L Twin-Screw Compressor Module
1000hp Liquid to Air Intercooler Core
High Flow Cast Aluminum T6 Hardened Lower Manifold
High Flow Cast Aluminum T6 Hardened Throttle Body Inlet Y
45mm Boost Bypass Assembly
Billet Aluminum Direct Drive Cradle System
Supercharger Serpentine Drive Belt
Hard Anodized Billet Aluminum Serpentine Idlers
Johnson CM30 30 Liter/Min Intercooler Water Pump
Intercooler Water Recovery Tank
Cross Flow Heat Exchanger
High Flow Fuel Rail System
Molded Silicone Couplers
Power-Steering Reservoir Relocation Assembly
Included with the SC is the Weistec Engineering trunk mounted water tank upgrade for an increased cooling capacity (approximately 6 US Gallons). This comes with an easy drain access with large capacity ball valve drain system.
Also included with the SC is Weistec's Oil / Air Separator System. The separator system vastly decreases oil retention by the engine. The system comes equipped with billet PCV adapter fittings for easy bolt on performance, and accumulates oil in the lower body which can then be drained and recycled during every oil change.
Price: $11,250 CAD ($8,415 USD as of March 26th exchange rate) + shipping
x M156 ROW Airbox Set with High Flow Air Filter Set
These are manufactured with a much higher flowing mass air flow sensor housing profile which improves flow characteristics of the ROW Airboxes. The M156 High Flow Air Filters are “dry” filters, they do not cause issues with the Mass Air Sensors. These are a drop-in replacement.
Price: $650 CAD ($490 USD as of March 26th exchange rate) + shipping
x C63 Stage 2 Street Brake Package
- Girodisc 360x36mm Front 2pc Slotted Racing Rotors
- Girodisc 330x26mm Rear 2pc Slotted Racing Rotors
- Porterfield R4-S Front and Rear Street/Track Brake Pads
These are slotted and drilled rotors that actually vent correctly. Makes a huge difference in stopping power on the roads. These were used for 3 months last summer.
Price: $2,550 CAD ($1,907 USD as of March 26th exchange rate) + shipping
I sadly parted out my 2013 C63 AMG and have some quality performance parts available for sale, which may be of interest to some of you. I have pictures which I can send to anyone sending me a PM request.
x C63 AMG Weistec headers M156 engine
Please don't compare these to other brands. You get what you pay for and this is particularly true for these.
Simply put, they are the best C63 headers out there in terms of sound, fitment, performance and heat management. It took a long time for Weistec to release long tube headers for the C63 AMG but their R&D is top notch and above the competition.
Included with the exhaust manifolds are 3” Stainless Steel Midpipes, and a 3” Stainless Steel X Pipe.
Bolt on installation that retains the factory resonator and mufflers.
Price: $4,200 CAD ($3,142 USD as of March 26th exchange rate) + shipping
x Weistec M156 High Flow Cats C63
3 Inch Inlet and Outlet
200 Cell Construction
Minimal Flow Restriction
Reduces Tailpipe Odors + Cleaner emissions
Price: $1,250 CAD ($935 USD as of March 26th exchange rate) + shipping
x KW V3 Dynamic Damping Control (DDC) coilovers
KW V3 DDC coilovers with ECU option of using KW's App control + individual set ups in a push of a button.
The KW DDC coilovers are part of the KW iSuspension program - the intelligent suspension solution for vehicles without factory adaptive suspension.
These combine the advantages of an adaptive damping system with a vehicle-specific aftermarket suspension solution.
Lowering can be done via the composite spring collar on the shock body or on the height adjustable rear perch in the rear of the vehicle.
-dirt-resistant trapezoid thread and the composite collar
-retrofit electronic damper adjustment
-3 damping setups: Comfort / Sport / Sport+
-operation by retrofit button or optional App
-create personalized setups with the KW DDC App
The coilovers with this electronically controlled dampers enable an intelligent suspension setup via App-control.
This allows you to upgrade your car with an adaptive damper control, and to have the option to adjust via the KW DDC App to suit your driving style. You do not need any tools to physically adjust the dampers!
The free KW DDC KW App in combination with our optional W-LAN module allows you to customize your own damper setup instantaneously.
This is an amazing coilovers set for our cars for both use on the roads and at the track.
Price: $4,650 CAD ($3,478 USD as of March 26th exchange rate) + shipping
x 4 RAYS Volk ZE40 Matte Blue Gunmetal + 4 TOYO R888
*****RAYS Volk ZE40 Matte Blue Gunmetal*****
Mint condition
No stratches, dings, dents or anything - gorgeous
Front:
19x8.5 5x112 ET44
Rear:
19x9.5 5x112 ET49
*****Wrapped in Toyo Tires Proxes R888*****
Front:
245/35 19
Rear:
265/30 19
Heat Cycled for better performance and durability
Mounted & Balanced 19"
This set has not seen track use = almost new tires (used for a month on public roads)
This tire and wheel package comes with the following EXTRAS:
- M14x1.5 27mm Neon Chrome Conical Seat Lug Bolt (Pack of 20)
- Volk Racing ZE40 Center Cap - Matte Blue Gunmetal (worth $75 a piece)
- Volk Valve stems with Volk valve stem caps
- 2 sets of 4 centering rings
- free set of 4 Toyo Proxes R888 tire lettering
Price: $5,990 CAD ($4,480 USD as of March 26th exchange rate) + shipping
x C63 AMG Stage 2 M156 Weistec Supercharger System
672 HORSEPOWER, 662 FT-LB OF TORQUE (with appropriate high flow exhaust system)
2.3L Twin-Screw Compressor Module
1000hp Liquid to Air Intercooler Core
High Flow Cast Aluminum T6 Hardened Lower Manifold
High Flow Cast Aluminum T6 Hardened Throttle Body Inlet Y
45mm Boost Bypass Assembly
Billet Aluminum Direct Drive Cradle System
Supercharger Serpentine Drive Belt
Hard Anodized Billet Aluminum Serpentine Idlers
Johnson CM30 30 Liter/Min Intercooler Water Pump
Intercooler Water Recovery Tank
Cross Flow Heat Exchanger
High Flow Fuel Rail System
Molded Silicone Couplers
Power-Steering Reservoir Relocation Assembly
Included with the SC is the Weistec Engineering trunk mounted water tank upgrade for an increased cooling capacity (approximately 6 US Gallons). This comes with an easy drain access with large capacity ball valve drain system.
Also included with the SC is Weistec's Oil / Air Separator System. The separator system vastly decreases oil retention by the engine. The system comes equipped with billet PCV adapter fittings for easy bolt on performance, and accumulates oil in the lower body which can then be drained and recycled during every oil change.
Price: $11,250 CAD ($8,415 USD as of March 26th exchange rate) + shipping
x M156 ROW Airbox Set with High Flow Air Filter Set
These are manufactured with a much higher flowing mass air flow sensor housing profile which improves flow characteristics of the ROW Airboxes. The M156 High Flow Air Filters are “dry” filters, they do not cause issues with the Mass Air Sensors. These are a drop-in replacement.
Price: $650 CAD ($490 USD as of March 26th exchange rate) + shipping
x C63 Stage 2 Street Brake Package
- Girodisc 360x36mm Front 2pc Slotted Racing Rotors
- Girodisc 330x26mm Rear 2pc Slotted Racing Rotors
- Porterfield R4-S Front and Rear Street/Track Brake Pads
These are slotted and drilled rotors that actually vent correctly. Makes a huge difference in stopping power on the roads. These were used for 3 months last summer.
Price: $2,550 CAD ($1,907 USD as of March 26th exchange rate) + shipping
Last edited by L.C.A.D.; 03-26-2017 at 09:04 PM. Reason: Added pictures
#4
MBWorld Fanatic!
Man, those are some STEEP prices. Some are more expensive than brand new!
#5
MBWorld Fanatic!
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,044
Received 2,810 Likes
on
1,664 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
Trending Topics
#8
LOL those giro disc prices are our of control LOL
#11
MBWorld Fanatic!
Not to mention a brand new Stage 2 kit is only $1500 more. Yeah, I know this has a couple of exrras but a new kit comes with warranty. No way the OP gets any of these prices on the go fast parts. The wheels and suspension...I don't know. Maybe?
#12
Not without pics for the wheels.
Edit: New, the wheels are about $880 per wheel, or $3,500 for all 4. When you factor in the extras, including tires, it's a decent price.
Edit: New, the wheels are about $880 per wheel, or $3,500 for all 4. When you factor in the extras, including tires, it's a decent price.
Last edited by Ambystom01; 03-26-2017 at 06:19 PM.
#13
MBWorld Fanatic!
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,044
Received 2,810 Likes
on
1,664 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
Pics. Dyno charts. Reasonable prices. All of these things make for a good FS thread. This is not one of them.
#14
Member
Thread Starter
I am surprized the ROW airboxes retail for $150 USD each. I can show you my invoice and I paid $549.99 from Weistec ... which I believe is still their advertised price.
The following users liked this post:
C63fora2w1 (03-26-2017)
#15
Member
Thread Starter
#16
Member
Thread Starter
TBH, I really believe both the wheels and suspension are decently priced given the extras that come along with them.
#18
Member
Thread Starter
And as far as prices are concerned, these can be discussed. Most of the parts listed here are very high quality parts from respected manufacturers. You get what you pay for, these are expensive brand new, and not very common on the used market for this very reason.
#19
MBWorld Fanatic!
Pics are available. I'll add some. Dyno numbers? what for? this is not a performance thread, it is a FS thread. Dyno numbers will vary from one car to the other depending on one's car and mods anyways.
And as far as prices are concerned, these can be discussed. Most of the parts listed here are very high quality parts from respected manufacturers. You get what you pay for, these are expensive brand new, and not very common on the used market for this very reason.
And as far as prices are concerned, these can be discussed. Most of the parts listed here are very high quality parts from respected manufacturers. You get what you pay for, these are expensive brand new, and not very common on the used market for this very reason.
Good luck~
The following users liked this post:
C63fora2w1 (03-26-2017)
#20
Member
Thread Starter
Since you're emphasizing that this is a FS thread, then post pictures of your very high quality parts that you are asking a premium price for! While your parts are a premium and I believe that you paid out of your butt by purchasing the parts from Weistec, I highly doubt that there are many who would be willing to be your sacrificial lamb on this forum and pay your prices. If you did your research, you'll realize that Weistec is a reseller, they mark things up. "Weistec headers" are a 4-1 design that is made by MBH, you could have had brand new MBH headers for the price of your used "Weistec"headers. For even less money, you can by the copied MBH headers that are sold by Autotalent for half the price. Those parts are not common on the used market because, most people on this forum do their research on the parts prior to paying full retail + markups for the parts that you are selling...
Good luck~
Good luck~
I did my own research prior to purchasing these parts, thank you, and we may have different sources. The debate on headers design has been discussed a lot on this forum, and this thread is not there for that.
#21
Member
Thread Starter
Guys, please consider that prices listed are in canadian dollars first, not USD. I thought the weak canadian dollar vs us dollar would make prices more appealing for you, but please make sure you don't mix both while reviewing the OP.
#23
MBWorld Fanatic!
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,044
Received 2,810 Likes
on
1,664 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
Pics are available. I'll add some. Dyno numbers? what for? this is not a performance thread, it is a FS thread. Dyno numbers will vary from one car to the other depending on one's car and mods anyways.
And as far as prices are concerned, these can be discussed. Most of the parts listed here are very high quality parts from respected manufacturers. You get what you pay for, these are expensive brand new, and not very common on the used market for this very reason.
And as far as prices are concerned, these can be discussed. Most of the parts listed here are very high quality parts from respected manufacturers. You get what you pay for, these are expensive brand new, and not very common on the used market for this very reason.
The following users liked this post:
C63fora2w1 (03-26-2017)
#24
Member
Thread Starter
You advertise it as "672hp" all over your post. So a buyer would expect to achieve those numbers if they were to purchase these parts, or at least that's what you make it sound like. Where are the dyno charts that show that this setup made that power? I think that's a reasonable ask, not trying to be a dick.
#25
MBWorld Fanatic!