Steering Box C&m Hydraulics
#1
Super Member
Thread Starter
Join Date: Aug 2005
Location: Mercerville New Jersey
Posts: 801
Likes: 0
Received 1 Like
on
1 Post
1991 560SEC Teal 1989 420SEL Ice Blue 1984 500SEC White
Steering Box C&m Hydraulics
Hi
Has anyone bought or had a steering box or any other rebuilt work done by C&M Hydraulics.
They are out of Las Vegas.
Please any comments.
Thanks
Bruce
Has anyone bought or had a steering box or any other rebuilt work done by C&M Hydraulics.
They are out of Las Vegas.
Please any comments.
Thanks
Bruce
#3
Super Member
Thread Starter
Join Date: Aug 2005
Location: Mercerville New Jersey
Posts: 801
Likes: 0
Received 1 Like
on
1 Post
1991 560SEC Teal 1989 420SEL Ice Blue 1984 500SEC White
Hi
I havn't removed it, as of yet. I am looking for a source still. Mine is starting that wet look, and it is only a matter of time.
I saw this company and they seemed to either rebuild all mercedes models boxes, or have a source for them.
I havn't removed it, as of yet. I am looking for a source still. Mine is starting that wet look, and it is only a matter of time.
I saw this company and they seemed to either rebuild all mercedes models boxes, or have a source for them.
#7
Newbie
Join Date: Nov 2006
Location: Las Vegas
Posts: 23
Likes: 0
Received 1 Like
on
1 Post
1987 560SEL, 1987 570SEC
They're supposed to be good. That said, what's leaking? I replaced the seal around the pitman shaft by myself to end a leak on my 560SEL. If the power steering pump is leaking, it almost always is the large (~2") o-ring in the back of the pump housing, another DIY job.
Trending Topics
#8
Super Member
Thread Starter
Join Date: Aug 2005
Location: Mercerville New Jersey
Posts: 801
Likes: 0
Received 1 Like
on
1 Post
1991 560SEC Teal 1989 420SEL Ice Blue 1984 500SEC White
Hi Mike
I am not exactly sure where the box is leaking. I need to clean it up a little and see if I can tell, It is supposed to be warmer here in Jersey tomorrow.
Hows the building going on the coupe?
Bruce
PS You have heard of these guys C&M. Are they ok or good?
I am not exactly sure where the box is leaking. I need to clean it up a little and see if I can tell, It is supposed to be warmer here in Jersey tomorrow.
Hows the building going on the coupe?
Bruce
PS You have heard of these guys C&M. Are they ok or good?
#9
C & M Hydraulics Steering Box
I got a steering box from them in 2000 for a 560sl and today the only mechanical problem is a small seal leak. From a functional point the box is too tight and steers a little hard. I think the box was about $400 including shipping at that time,,,, Hey 10 years for a reman??