84 euro 500 SEC Parts car (PARTS)
11-27-2004, 12:15 AM
#1
Newbie
Thread Starter
Join Date: Nov 2004
Location: Cybertown, Tx.
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
500SEC, 300SDL, 928S4
PARTING OUT 84 euro 500 SEC
A short intro (I promise)!
I have a 85 500 SEC that has a light hit in the front that I am sending in to get fixed. But before I could do this, I needed to secure the parts to fix it.
So just by luck I ran across an 84 euro 500 SEC with the needed parts. The car is in fair condition (except interior leather) show low miles and runs good.
__________________________________________________ _____________
The only items I will be keeping are:
Hood
Front and rear bumpers
Rear glass
__________________________________________________ _____________
I have no personal attachment to this parts car, nor am I looking to make a living at selling parts. I just thought I would offer them here first to help support a community that has helped to keep these cars going and it's owner out of the poor house.
So the question is: Anyone here want to buy any 84 euro 500 SEC parts before I strip it and put them on EBAY.
P.S. Before I bought this parts car, I had already bought a nice used front bumper off a 85 500 SEC (US spec) that is now for sale. I paid 300.00 usd, I will let it go for 250.00usd + shipping.
You can email me direct at tmax"AT"rgv.rr.com Just replace "AT" with @
I have a 85 500 SEC that has a light hit in the front that I am sending in to get fixed. But before I could do this, I needed to secure the parts to fix it.
So just by luck I ran across an 84 euro 500 SEC with the needed parts. The car is in fair condition (except interior leather) show low miles and runs good.
__________________________________________________ _____________
The only items I will be keeping are:
Hood
Front and rear bumpers
Rear glass
__________________________________________________ _____________
I have no personal attachment to this parts car, nor am I looking to make a living at selling parts. I just thought I would offer them here first to help support a community that has helped to keep these cars going and it's owner out of the poor house.
So the question is: Anyone here want to buy any 84 euro 500 SEC parts before I strip it and put them on EBAY.
P.S. Before I bought this parts car, I had already bought a nice used front bumper off a 85 500 SEC (US spec) that is now for sale. I paid 300.00 usd, I will let it go for 250.00usd + shipping.
You can email me direct at tmax"AT"rgv.rr.com Just replace "AT" with @
Last edited by Tmax; 11-27-2004 at 12:51 AM. Reason: corrections and additions
11-27-2004, 11:10 PM
#2
Member
Join Date: Nov 2004
Location: Cali
Posts: 237
Likes: 0
Received 1 Like
on
1 Post
2001 CLK430 & 2007 350Z
Hello PARTS GUY
Im interested to find out if the sunroof mechanism will work on a 420 & 560 sel's? if it does please let me know ho much will you sell it for? i need the whole sunroof mechanism (tracks, motor etc.) Please let me know A.S.A.P.
rianna_melvin@hotmail.com
rianna_melvin@hotmail.com
11-28-2004, 08:46 PM
#3
Newbie
Thread Starter
Join Date: Nov 2004
Location: Cybertown, Tx.
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
500SEC, 300SDL, 928S4
I dont know, but I will look into it. Maybe someone here can chime in?
You want everything but the switch and body pannel, right?
You want everything but the switch and body pannel, right?
Last edited by Tmax; 11-28-2004 at 08:49 PM.
11-29-2004, 10:38 AM
#6
Banned
Join Date: May 2002
Location: The Ferrari F1 Factory
Posts: 5,768
Likes: 0
Received 0 Likes
on
0 Posts
F248 F1
whats the center counsole trim wood like ? describe it maybe its the one i need, vaccum number and the driver side door where you unlock the door the black thing that covers that area , what shape , can you post any pics ?
i need those 3 items for sho
i need those 3 items for sho
11-29-2004, 11:24 AM
#7
Newbie
Thread Starter
Join Date: Nov 2004
Location: Cybertown, Tx.
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
500SEC, 300SDL, 928S4
I will be going over the the shop late this afternoon/tonight and will try to get some pictures.
The wood and leather is shot in this car (as far as I remember). The past owner (PO) Left it at a car repair shop to have the window fixed. The window was left half way down for about 3 months. Needless to say the humidity and rain did a number on it
Humidity is not a freind to this kind of electrical items. I can and will test anything and everything like switches controllers etc. before I sell any of it.
Any switch that test good I will sell super cheap, just so I don't have to store them.
A/C Controller will go for core charge at most.
I don't want to store a ton or car parts I will have not need for, so everything is going one way or the other!
The wood and leather is shot in this car (as far as I remember). The past owner (PO) Left it at a car repair shop to have the window fixed. The window was left half way down for about 3 months. Needless to say the humidity and rain did a number on it
Humidity is not a freind to this kind of electrical items. I can and will test anything and everything like switches controllers etc. before I sell any of it.
Any switch that test good I will sell super cheap, just so I don't have to store them.
A/C Controller will go for core charge at most.
I don't want to store a ton or car parts I will have not need for, so everything is going one way or the other!
Trending Topics
11-29-2004, 03:43 PM
#8
Banned
Join Date: May 2002
Location: The Ferrari F1 Factory
Posts: 5,768
Likes: 0
Received 0 Likes
on
0 Posts
F248 F1
ohhh also the ac blower, the thing that has the belt to it that goes infront of the engine at the lower left i need that lol.
AC blower
Thing for driver door as i described
Wood for center counsole-dont matter ill get it refurnished
Vaccum for locks that goes in the trunk
hmmm what else what eleseeee
ohhh the special lift-jack for the benz ? does it have that in the trunk?
i think thats about it ! and the stuff i mention before.... yup thanks man i we you big if you can help out with these parts
EG
AC blower
Thing for driver door as i described
Wood for center counsole-dont matter ill get it refurnished
Vaccum for locks that goes in the trunk
hmmm what else what eleseeee
ohhh the special lift-jack for the benz ? does it have that in the trunk?
i think thats about it ! and the stuff i mention before.... yup thanks man i we you big if you can help out with these parts
EG
11-29-2004, 06:28 PM
#9
Member
Join Date: Oct 2004
Location: Atlanta, GA
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
96 S600 Euro, 91 560 SEC, 88 300TE, 87 560SEL, 86 560SL, 80 280SE, 64 Austin Healey 3000MIII
I would be interested in the exhaust manifolds as well as the fuel distributor..
Many Thanks!
Jonathan
Many Thanks!
Jonathan
11-30-2004, 10:32 PM
#10
Newbie
Thread Starter
Join Date: Nov 2004
Location: Cybertown, Tx.
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
500SEC, 300SDL, 928S4
Sorry for not getting any pics up yet, but I have been tied up late at work (Holliday catch-up) and it's been dark and cold by the time I get home.
I am taking notes of what parts everyone has asked for and will be dedicating my efforts this saturday to the parts car.
Thank you for your understanding.
Tmax
I am taking notes of what parts everyone has asked for and will be dedicating my efforts this saturday to the parts car.
Thank you for your understanding.
Tmax
02-02-2005, 11:56 AM
#11
Newbie
Thread Starter
Join Date: Nov 2004
Location: Cybertown, Tx.
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
500SEC, 300SDL, 928S4
Not forgotten
Well it's been a busy new year (new job); however I have not forgotten about you guys.
I finely received my 85 SEC from the paint shop the other day and am working on getting it legal. I decided to use the US spec bumper for the front so both of the Euro bumpers are on the market.
As soon as the weather gets better (cold and cloudy) I will get some pics of the old dog.
Status of the 1984 Euro Parts Car.
Engine (sold as a long block only, no assy.)
Exhaust manifolds (euro)
Transmission
Differential
Drive shafts
Front and rear suspension
Doors
Fenders
Front bumper (euro)
Rear bumper (euro)
Trunk lid
Items not on the board for sale.
Interior (water damage)
Fuel distributor (shoot)
I finely received my 85 SEC from the paint shop the other day and am working on getting it legal. I decided to use the US spec bumper for the front so both of the Euro bumpers are on the market.
As soon as the weather gets better (cold and cloudy) I will get some pics of the old dog.
Status of the 1984 Euro Parts Car.
Engine (sold as a long block only, no assy.)
Exhaust manifolds (euro)
Transmission
Differential
Drive shafts
Front and rear suspension
Doors
Fenders
Front bumper (euro)
Rear bumper (euro)
Trunk lid
Items not on the board for sale.
Interior (water damage)
Fuel distributor (shoot)
