S55 Dyno Mode
Ive always wondered so i can burnout & do donuts but i actually am gunna start doing dynos as well so i need to know...
im gunna slap a hoe if anyone tells me to push the Traction Control button

(the traction control button doesnt turn traction off all the way)

Make sure your MFD is displaying the MILES screen.
Turn Key to OFF
Turn Key to ON
Press the R button (right side of cluster) three times while the SRS light is on:

If you pressed the reset button 3 times while the SRS light is on and you were on the MILES screen, your display will display your voltage:

You can scroll through the various screens using the page up / page down controls on the left side of the steering wheel:

You'll see the car model, engine type, oil level (when running), software versions, VIN # and a bunch of other information:

Last page is the ESP DYNAMOMETER TEST screen:

Using the volume +/- controls on the right side of the steering wheel select ON

Start the car and several malfunctions will display since this will disable ESP, ABS, BAS, BPV and several other electronic controls in the car.
When you are done with dyno mode you MUST disable it... otherwise it will always be in dyno mode. Go to the ESP DYNAMOMETER menu and select W. KL15 OFF and then start the car.

Make sure your MFD is displaying the MILES screen.
Turn Key to OFF
Turn Key to ON
Press the R button (right side of cluster) three times while the SRS light is on:

If you pressed the reset button 3 times while the SRS light is on and you were on the MILES screen, your display will display your voltage:

You can scroll through the various screens using the page up / page down controls on the left side of the steering wheel:

You'll see the car model, engine type, oil level (when running), software versions, VIN # and a bunch of other information:

Last page is the ESP DYNAMOMETER TEST screen:

Using the volume +/- controls on the right side of the steering wheel select ON

Start the car and several malfunctions will display since this will disable ESP, ABS, BAS, BPV and several other electronic controls in the car.
When you are done with dyno mode you MUST disable it... otherwise it will always be in dyno mode. Go to the ESP DYNAMOMETER menu and select W. KL15 OFF and then start the car.
PS, I ain`t skeeered of the 600

E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
Trending Topics
The Best of Mercedes & AMG





Make sure your MFD is displaying the MILES screen.
Turn Key to OFF
Turn Key to ON
Press the R button (right side of cluster) three times while the SRS light is on:

If you pressed the reset button 3 times while the SRS light is on and you were on the MILES screen, your display will display your voltage:

You can scroll through the various screens using the page up / page down controls on the left side of the steering wheel:

You'll see the car model, engine type, oil level (when running), software versions, VIN # and a bunch of other information:

Last page is the ESP DYNAMOMETER TEST screen:

Using the volume +/- controls on the right side of the steering wheel select ON

Start the car and several malfunctions will display since this will disable ESP, ABS, BAS, BPV and several other electronic controls in the car.
When you are done with dyno mode you MUST disable it... otherwise it will always be in dyno mode. Go to the ESP DYNAMOMETER menu and select W. KL15 OFF and then start the car.
Doesn’t work on my 2006 S55......key should not be turned to ON, instead only turned to first position (ON is second position)
Last edited by poormanAMG; Oct 25, 2019 at 02:41 PM. Reason: additional info





