When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ok, thanks for all the great photos guys - I bit the bullet and got a color-matched spoiler from JBSpeed. I have to say service was excellent - I ordered Monday and he shipped it immediately and it arrived DHL the next day - $170 total inc shipping.
The part was well packaged and came with the required 3M tape - paint matching was perfect.
Here's some of my pix (excuse the dust - it's ash from the Washington wildfires) ...
To me, it looks 10X better on your black car since it's the same color as the car. On the white car with the black spoiler, I don't feel it looks as cohesive.
Are you planning on wrapping the side inserts like you did for the front center lip and the Crome piece on the trunk
Thank you. I did wrap the side Inserts in cf,but didn’t really like the look. So I had it removed and wrapped in gloss black instead. Only parts that I had wrapped in CF is the front grill and lower bumper piece.
Thank you. I did wrap the side Inserts in cf,but didn’t really like the look. So I had it removed and wrapped in gloss black instead. Only parts that I had wrapped in CF is the front grill and lower bumper piece.
Got it, from your first post, your crome strip on trunk below the CF trunk spoiler is also cf wrapped?
Many I ask the cost of all the wraps costed including the side insert ? Many thanks.
All the wraps were done by myself. Only cost was materials, which wasn’t much.
Wow, nice 👍 job. Did you have to remove any of the exterior trims you wrapped including the side insets? Was the Mercedes hood piece plastic dipped? Thank you.
Sorry, did you do the wrap of the interior trims like the door, center console and dash trims and is so, can you share with us who would like to do the same how it’s done ie how to remove them?
Wow, nice 👍 job. Did you have to remove any of the exterior trims you wrapped including the side insets? Was the Mercedes hood piece plastic dipped? Thank you.
Sorry, did you do the wrap of the interior trims like the door, center console and dash trims and is so, can you share with us who would like to do the same how it’s done ie how to remove them?
Many thanks. The car looks great.
It depends on how well you can wrap. You don’t need to remove any of the pieces. The rocker panel inserts is a bit tricky. So that I had to remove the side skirts. The inside trim were left alone since its that piano black color. I like that classy look better than CF. If I ever decide to wrap interior trim later on. I’ll defiantly share the info here. And yes, the hood orniment was plasti dipped.
It depends on how well you can wrap. You don’t need to remove any of the pieces. The rocker panel inserts is a bit tricky. So that I had to remove the side skirts. The inside trim were left alone since its that piano black color. I like that classy look better than CF. If I ever decide to wrap interior trim later on. I’ll defiantly share the info here. And yes, the hood orniment was plasti dipped.
Thank you. Would you mind sharing how to remove the front center lower lip and side rocker panel or panel inserts? Many thanks.
Thank you. Would you mind sharing how to remove the front center lower lip and side rocker panel or panel inserts? Many thanks.
The front lower lip is held with clips. If you go under the front bumper. You will see how it’s held. Push the clips in and pull out. The side rocker panels are very difficult to remove. I don’t suggest anyone trying if you’re not familiar with working on cars. You can damage the paint trying to remove it. There’s a mixture of A LOT of clips and plastic nuts. If someone here can post the WIS instructions. Itll be easier for you to see how to remove the side skirts. You can’t just remove the side insert unless you remove the rocker panels completely. Because there’s clips you need to push in to release the inserts.
The front lower lip is held with clips. If you go under the front bumper. You will see how it’s held. Push the clips in and pull out. The side rocker panels are very difficult to remove. I don’t suggest anyone trying if you’re not familiar with working on cars. You can damage the paint trying to remove it. There’s a mixture of A LOT of clips and plastic nuts. If someone here can post the WIS instructions. Itll be easier for you to see how to remove the side skirts. You can’t just remove the side insert unless you remove the rocker panels completely. Because there’s clips you need to push in to release the inserts.