SL55/63/65/R230 AMG: V12 Engine Out (feast your eyes)
#76
Super Member
Yeah... MB uses a Very particular Turbo setup. Manifold and Turbine Wheel Housing casted as one single piece.That's why Marcin had to build a brand new Exhaust manifold to fit a custom turbo.
Brabus Sells a Bigger version of the Stock manifold + Housing, but sells It $20,000 ,Whithout upgrading The compressor wheel.
Soulsearcher did the good way...Althought his project probably needs some R&D, The Benefit will be 3 times the Stupîd Brabus upgrade,Wich doesn't inculde any Cooling upgrade.
Sometimes I ask Myself who's stupid enough to Buy Brabus Products.Mainly Oilheads... In USA brabus has never been very popular for engine upgrades...
Damn I really like this thread.I force myself to not check it more than once a day. lol
Brabus Sells a Bigger version of the Stock manifold + Housing, but sells It $20,000 ,Whithout upgrading The compressor wheel.
Soulsearcher did the good way...Althought his project probably needs some R&D, The Benefit will be 3 times the Stupîd Brabus upgrade,Wich doesn't inculde any Cooling upgrade.
Sometimes I ask Myself who's stupid enough to Buy Brabus Products.Mainly Oilheads... In USA brabus has never been very popular for engine upgrades...
Damn I really like this thread.I force myself to not check it more than once a day. lol
#77
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Atlanta
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
SL600 (1000 hp), Cayenne S, 996TT EVO GT750, F430 Spyder,A real Ford GT, 08 Gallardo Spyder
Bigger Fuel Pump
Just a higher capacity fuel pump...
If anyone wants the formulas for calculating best injector flow rate for a specific HP modification, let me know. For this project I need approx. a 65-68 lb/hr. Currently awaiting injector bench test results to see if oem is enough.
If anyone wants the formulas for calculating best injector flow rate for a specific HP modification, let me know. For this project I need approx. a 65-68 lb/hr. Currently awaiting injector bench test results to see if oem is enough.
![](https://mbworld.org/forums/members/soulsearcher-albums-sick-build-picture10378-bigger-fuel-pump.jpeg)
#78
MBWorld Fanatic!
Join Date: Apr 2009
Location: Lincoln, NE
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
2005 SL600, 2016 ES300h, 2012 Hayabusa
I hate to say it, but the design for the stock manifold looks like hell, why couldn't they have had another couple inches in the engine bay for a tubular manifold.....
![Frown](https://mbworld.org/forums/images/smilies/frown.gif)
#80
MBWorld Fanatic!
Join Date: Apr 2009
Location: Lincoln, NE
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
2005 SL600, 2016 ES300h, 2012 Hayabusa
It would be interesting to have a dyno of your car stock turbo/mani, sl65 turbo/mani, then your custom tubular big turbo setup....I am guessing it is going to sound like a fighter jet taking off.
#81
MBWorld Fanatic!
Just a higher capacity fuel pump...
If anyone wants the formulas for calculating best injector flow rate for a specific HP modification, let me know. For this project I need approx. a 65-68 lb/hr. Currently awaiting injector bench test results to see if oem is enough.
![](https://mbworld.org/forums/members/soulsearcher-albums-sick-build-picture10378-bigger-fuel-pump.jpeg)
If anyone wants the formulas for calculating best injector flow rate for a specific HP modification, let me know. For this project I need approx. a 65-68 lb/hr. Currently awaiting injector bench test results to see if oem is enough.
![](https://mbworld.org/forums/members/soulsearcher-albums-sick-build-picture10378-bigger-fuel-pump.jpeg)
#83
MBWorld Fanatic!
Join Date: May 2008
Location: Maryland
Posts: 1,615
Likes: 0
Received 0 Likes
on
0 Posts
SL55 AMG
#84
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Atlanta
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
SL600 (1000 hp), Cayenne S, 996TT EVO GT750, F430 Spyder,A real Ford GT, 08 Gallardo Spyder
x
Looking forward to it Bernie. Just signed up for the April 25th Miami Mile thru exotics rally. Hows yours coming along?
"Loud" would probably not work in my hood. Might have to slap some hi-flo silencers to shut her up.
Thx for the info. The words "savings" and "budget" got thrown away a looong time ago...painful!
#85
MBWorld Fanatic!
Join Date: Apr 2009
Location: Lincoln, NE
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
2005 SL600, 2016 ES300h, 2012 Hayabusa
yeah, I guess the 105 isn't that bad compared to the cost of a custom turbo setup like that....I'm used to getting a whole set of injectors for around 300....
#86
Just a higher capacity fuel pump...
If anyone wants the formulas for calculating best injector flow rate for a specific HP modification, let me know. For this project I need approx. a 65-68 lb/hr. Currently awaiting injector bench test results to see if oem is enough.
![](https://mbworld.org/forums/members/soulsearcher-albums-sick-build-picture10378-bigger-fuel-pump.jpeg)
If anyone wants the formulas for calculating best injector flow rate for a specific HP modification, let me know. For this project I need approx. a 65-68 lb/hr. Currently awaiting injector bench test results to see if oem is enough.
![](https://mbworld.org/forums/members/soulsearcher-albums-sick-build-picture10378-bigger-fuel-pump.jpeg)
#87
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Atlanta
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
SL600 (1000 hp), Cayenne S, 996TT EVO GT750, F430 Spyder,A real Ford GT, 08 Gallardo Spyder
#88
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Atlanta
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
SL600 (1000 hp), Cayenne S, 996TT EVO GT750, F430 Spyder,A real Ford GT, 08 Gallardo Spyder
ROTORA 12 PISTON / 16in ROTOR
So I pulled the plug on the Rotora front & rear big big brake kit. 12 piston / 16 in rotors and larger rear calipers & 15 in rotors.
At the last Texas Mile, my brakes did not seem like they had much more left and that was at 173-176 mph (15 passes in a row).
Special brackets for front and rear had to be custom made (not needed on SL65s, just SL600)
At the last Texas Mile, my brakes did not seem like they had much more left and that was at 173-176 mph (15 passes in a row).
Special brackets for front and rear had to be custom made (not needed on SL65s, just SL600)
#89
Super Member
^ 12 pistons... Soulsearcher, your project looks more and more like an Automotive Orgy and I really like it...
Last edited by DCMETRO22Z; 02-14-2010 at 07:02 AM.
#90
Senior Member
Join Date: May 2008
Location: Oklahoma
Posts: 413
Likes: 0
Received 2 Likes
on
2 Posts
SLK55AMG, SL600
So I pulled the plug on the Rotora front & rear big big brake kit. 12 piston / 16 in rotors and larger rear calipers & 15 in rotors.
At the last Texas Mile, my brakes did not seem like they had much more left and that was at 173-176 mph (15 passes in a row).
Special brackets for front and rear had to be custom made (not needed on SL65s, just SL600)
At the last Texas Mile, my brakes did not seem like they had much more left and that was at 173-176 mph (15 passes in a row).
Special brackets for front and rear had to be custom made (not needed on SL65s, just SL600)
Nice choice I see we think a like lol!
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![Wootrock](https://mbworld.org/forums/images/smilies/wootrock.gif)
#91
MBWorld Fanatic!
Join Date: May 2008
Location: Maryland
Posts: 1,615
Likes: 0
Received 0 Likes
on
0 Posts
SL55 AMG
So I pulled the plug on the Rotora front & rear big big brake kit. 12 piston / 16 in rotors and larger rear calipers & 15 in rotors.
At the last Texas Mile, my brakes did not seem like they had much more left and that was at 173-176 mph (15 passes in a row).
Special brackets for front and rear had to be custom made (not needed on SL65s, just SL600)
At the last Texas Mile, my brakes did not seem like they had much more left and that was at 173-176 mph (15 passes in a row).
Special brackets for front and rear had to be custom made (not needed on SL65s, just SL600)
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#93
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Atlanta
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
SL600 (1000 hp), Cayenne S, 996TT EVO GT750, F430 Spyder,A real Ford GT, 08 Gallardo Spyder
Thanks ya'll (I am in the south) for the support. Here is a tid bit update:
So the injector flow bench test results were poor. Without going into too much tech details, suffice to say that the injector pushed out about half of what was needed. So custom injectors are in progress.
I also asked for a plug-n-play 2ndary file to be made available with the push of a button as a safety measure against those who may want to explore the limits of this car. This file would limit the cars performance to “barely drivable”.
Confused? Think about it. How often do you leave your car with a tech, a detailer or even a valet at the club? Personally I don’t trust a stranger with a 1000hp car or even a 600 hp car.
So the injector flow bench test results were poor. Without going into too much tech details, suffice to say that the injector pushed out about half of what was needed. So custom injectors are in progress.
I also asked for a plug-n-play 2ndary file to be made available with the push of a button as a safety measure against those who may want to explore the limits of this car. This file would limit the cars performance to “barely drivable”.
Confused? Think about it. How often do you leave your car with a tech, a detailer or even a valet at the club? Personally I don’t trust a stranger with a 1000hp car or even a 600 hp car.
Last edited by soulsearcher; 02-16-2010 at 09:05 PM. Reason: x
#97
MBWorld Fanatic!
Thanks ya'll (I am in the south) for the support. Here is a tid bit update:
So the injector flow bench test results were poor. Without going into too much tech details, suffice to say that the injector pushed out about half of what was needed. So custom injectors are in progress.
I also asked for a plug-n-play 2ndary file to be made available with the push of a button as a safety measure against those who may want to explore the limits of this car. This file would limit the cars performance to “barely drivable”.
Confused? Think about. How often do you leave your car with a tech, a detailer or even a valet at the club? Personally I don’t trust a stranger with a 1000hp car or even a 600 hp car.
So the injector flow bench test results were poor. Without going into too much tech details, suffice to say that the injector pushed out about half of what was needed. So custom injectors are in progress.
I also asked for a plug-n-play 2ndary file to be made available with the push of a button as a safety measure against those who may want to explore the limits of this car. This file would limit the cars performance to “barely drivable”.
Confused? Think about. How often do you leave your car with a tech, a detailer or even a valet at the club? Personally I don’t trust a stranger with a 1000hp car or even a 600 hp car.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#99
Member
Last edited by Dsmed; 02-16-2010 at 03:59 PM.
#100
Member
Join Date: Oct 2009
Posts: 96
Received 0 Likes
on
0 Posts
03 SL55,01 acura cls,05 lotus elise RIP
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)