SL55/63/65/R230 AMG: Beauty & the Beast!
#26
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2004
Location: Southern, CA.
Posts: 9,155
Likes: 0
Received 19 Likes
on
18 Posts
V12-Biturbo
Thnx ya some fat 345/30 on CCW 18/13 RR 18x10 Frnts 265/40
![Beauty & the Beast!-fullsizerender-3.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391932d1542323650t-beauty-beast-fullsizerender-3.jpg)
![Beauty & the Beast!-photo-140_zps1dfafd7b.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391933d1542323650t-beauty-beast-photo-140_zps1dfafd7b.jpg)
![Beauty & the Beast!-4f91b86a-f816-4e92-be24-ff172bedd368.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391934d1542323650t-beauty-beast-4f91b86a-f816-4e92-be24-ff172bedd368.jpg)
![Beauty & the Beast!-photo-138_zps3e7da29b.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391935d1542323650t-beauty-beast-photo-138_zps3e7da29b.jpg)
![Beauty & the Beast!-photo-141_zps08cbed4b.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391936d1542323650t-beauty-beast-photo-141_zps08cbed4b.jpg)
![Beauty & the Beast!-photo-91-1_zps072f95e9.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391937d1542323650t-beauty-beast-photo-91-1_zps072f95e9.jpg)
When I 1st installed the CCW's Mercedes forgot to install my center caps
![Beauty & the Beast!-photo-103-1_zps755f2006.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391938d1542323650t-beauty-beast-photo-103-1_zps755f2006.jpg)
Aftermarket Lightweight 2 piece floating rotors on the Front & Rear on Stock Calipers w/Brembo logos
![Beauty & the Beast!-photo-96_zpsd21879b1.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391939d1542323650t-beauty-beast-photo-96_zpsd21879b1.jpg)
![Beauty & the Beast!-photo-95-1_zps6ee3ac55.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391940d1542323650t-beauty-beast-photo-95-1_zps6ee3ac55.jpg)
When I picked 'em up @ Wheel shop in LA, I bought 2 sets of tires 1 drag 1 street..
![Beauty & the Beast!-img_9432_zps1d631808.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391941d1542323650t-beauty-beast-img_9432_zps1d631808.jpg)
They looked the part![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
![Beauty & the Beast!-photo-82_zpscaef0ade.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391942d1542323650t-beauty-beast-photo-82_zpscaef0ade.jpg)
![Beauty & the Beast!-photo-81_zps0306d47f.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391943d1542323650t-beauty-beast-photo-81_zps0306d47f.jpg)
And the most important part, the Coral where all the horses are lodged![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
![Beauty & the Beast!-fullsizerender-3.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391932d1542323650t-beauty-beast-fullsizerender-3.jpg)
![Beauty & the Beast!-photo-140_zps1dfafd7b.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391933d1542323650t-beauty-beast-photo-140_zps1dfafd7b.jpg)
![Beauty & the Beast!-4f91b86a-f816-4e92-be24-ff172bedd368.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391934d1542323650t-beauty-beast-4f91b86a-f816-4e92-be24-ff172bedd368.jpg)
![Beauty & the Beast!-photo-138_zps3e7da29b.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391935d1542323650t-beauty-beast-photo-138_zps3e7da29b.jpg)
![Beauty & the Beast!-photo-141_zps08cbed4b.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391936d1542323650t-beauty-beast-photo-141_zps08cbed4b.jpg)
![Beauty & the Beast!-photo-91-1_zps072f95e9.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391937d1542323650t-beauty-beast-photo-91-1_zps072f95e9.jpg)
When I 1st installed the CCW's Mercedes forgot to install my center caps
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
![Beauty & the Beast!-photo-103-1_zps755f2006.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391938d1542323650t-beauty-beast-photo-103-1_zps755f2006.jpg)
Aftermarket Lightweight 2 piece floating rotors on the Front & Rear on Stock Calipers w/Brembo logos
![Beauty & the Beast!-photo-96_zpsd21879b1.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391939d1542323650t-beauty-beast-photo-96_zpsd21879b1.jpg)
![Beauty & the Beast!-photo-95-1_zps6ee3ac55.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391940d1542323650t-beauty-beast-photo-95-1_zps6ee3ac55.jpg)
When I picked 'em up @ Wheel shop in LA, I bought 2 sets of tires 1 drag 1 street..
![Beauty & the Beast!-img_9432_zps1d631808.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391941d1542323650t-beauty-beast-img_9432_zps1d631808.jpg)
They looked the part
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
![Beauty & the Beast!-photo-82_zpscaef0ade.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391942d1542323650t-beauty-beast-photo-82_zpscaef0ade.jpg)
![Beauty & the Beast!-photo-81_zps0306d47f.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391943d1542323650t-beauty-beast-photo-81_zps0306d47f.jpg)
And the most important part, the Coral where all the horses are lodged
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
![Beauty & the Beast!-2014-11-28214716.jpg](https://mbworld.org/forums/attachments/sl55-amg-sl63-amg-sl65-amg-r230/391944d1542323650t-beauty-beast-2014-11-28214716.jpg)
Last edited by Thericker; 02-11-2015 at 09:22 PM.
The following users liked this post:
StirlingMoss722 (10-10-2018)
#27
Member
Its just finding a good deal on the rims/tires is a big issue for me. I need 19" versus my current 20". Then will sell the front bumper sides, and rear bumper w/ Valance.
I blame you Sean!
I blame you Sean!
The following users liked this post:
StirlingMoss722 (10-10-2018)
#29
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2004
Location: Southern, CA.
Posts: 9,155
Likes: 0
Received 19 Likes
on
18 Posts
V12-Biturbo
![Talking](https://mbworld.org/forums/images/icons/icon10.gif)
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![Roll Eyes (Sarcastic)](https://mbworld.org/forums/images/smilies/rolleyes.gif)
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Last edited by Thericker; 02-11-2015 at 11:25 PM.
The following users liked this post:
StirlingMoss722 (10-10-2018)
#31
Senior Member
Thank you. Absolutely love your car! I like the motorsport look of the wheels and wouldn't change them for anything bigger or heavier.
Very nice
Very nice
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
The following users liked this post:
StirlingMoss722 (10-10-2018)
#34
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2004
Location: Southern, CA.
Posts: 9,155
Likes: 0
Received 19 Likes
on
18 Posts
V12-Biturbo
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
![](http://www.twisia.com/mtp/pictures/Tumbler%20on%20Richmond.jpg)
![](http://www.webwombat.com.au/motoring/images/mercedes-benz-slr-mclaren-722-gt-2-big.jpg)
The SLR722 GT's get 18x13 RR 18x12 Frnt (Frnt way too wide for streets) it would just create ton of power robbing drag, w/ understeering like a snowplow, on the streets etc..
Isn't the SLR722 GT just flat out gorgeous? I wish they made a street version or an aftermarket kit that looked EXACTLY like this.. I would sell a kidney to buy 1
![hammer](https://mbworld.org/forums/images/smilies/bonk.gif)
![](http://img.more-explore.com/medium/21/Mercedes%20McLaren%20SLR%20722%20GT%20Sports%20Car.jpg)
![](http://www.world-challenge.com/media/k2/items/cache/fbdf9c35f0e130e40ac81bf5b9b6223f_XL.jpg)
The following users liked this post:
StirlingMoss722 (10-10-2018)
#37
MBWorld Fanatic!
#38
Super Member
Thericker the wide front wheel and tire on the front of the SLR is to prevent understeer and give the best front end grip. This would be the same on the street.
The reason why the road cars have narrower front tires is to make sure the car understeers if you go in too hot as this is the best way not to kill yourself, as opposed to spinning and facing on coming traffic.
If you want better handling increase the front tire size and camber to give the best turn in and handling however be ready to balance the back end as it comes around.
Check out the z28 track speck with 305mm square setup. It is posting some very quick lap times.
The reason why the road cars have narrower front tires is to make sure the car understeers if you go in too hot as this is the best way not to kill yourself, as opposed to spinning and facing on coming traffic.
If you want better handling increase the front tire size and camber to give the best turn in and handling however be ready to balance the back end as it comes around.
Check out the z28 track speck with 305mm square setup. It is posting some very quick lap times.
The following users liked this post:
StirlingMoss722 (10-10-2018)
#39
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2004
Location: Southern, CA.
Posts: 9,155
Likes: 0
Received 19 Likes
on
18 Posts
V12-Biturbo
Thericker the wide front wheel and tire on the front of the SLR is to prevent understeer and give the best front end grip. This would be the same on the street.
The reason why the road cars have narrower front tires is to make sure the car understeers if you go in too hot as this is the best way not to kill yourself, as opposed to spinning and facing on coming traffic.
If you want better handling increase the front tire size and camber to give the best turn in and handling however be ready to balance the back end as it comes around.
Check out the z28 track speck with 305mm square setup. It is posting some very quick lap times.
The reason why the road cars have narrower front tires is to make sure the car understeers if you go in too hot as this is the best way not to kill yourself, as opposed to spinning and facing on coming traffic.
If you want better handling increase the front tire size and camber to give the best turn in and handling however be ready to balance the back end as it comes around.
Check out the z28 track speck with 305mm square setup. It is posting some very quick lap times.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Edit update: Almost forgot this thread was mostly about my new RangeRover lol.. Already ordered the perf 2.5" pulley (only size available from ANY tuner so I bought it from the TOP english tuning co, it's due to be delivered tomorrow w/300 hiflo cats & ALL the fixings to recreate another Elephant Trunk CAI, having Jeremy OE tuning do full Dyno-Tune (if possible 109 race tune too?) either next wk or the wk after..
Just a Caned tune & pulley on 5.0 RR brings hp to 620-640, adding a real CAI is new ground as I couldn't find any quality true CAI mods on these Rovers, so gains to be had are unknown until I build one. All that + the Hiflo's on my Startech exhaust should bring this lil' Angry Rover up to 670+ BHP & 650+ BTQ (I'm under guesstimating, if the CAI adds half as much as it does to my SL, & I can get a 109 tune too? We'll see on the Dyno I guess..
Last edited by Thericker; 02-12-2015 at 11:27 PM.
#40
MBWorld Fanatic!
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
wide sort of makes you forget the 20's.
I would like to take you up on your offer, but can you tell me, is there a place in the UK that can supply and fit, or maybe send my car to the states.
Have you a rough idea how much to supply and fit.
I would be looking at June time, I will put a post on the forum.
Thanks again S8.
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#41
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2004
Location: Southern, CA.
Posts: 9,155
Likes: 0
Received 19 Likes
on
18 Posts
V12-Biturbo
Your car looks outrageous
not sure about the 18's but at 13 inches
wide sort of makes you forget the 20's.
I would like to take you up on your offer, but can you tell me, is there a place in the UK that can supply and fit, or maybe send my car to the states.
Have you a rough idea how much to supply and fit.
I would be looking at June time, I will put a post on the forum.
Thanks again S8.![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
wide sort of makes you forget the 20's.
I would like to take you up on your offer, but can you tell me, is there a place in the UK that can supply and fit, or maybe send my car to the states.
Have you a rough idea how much to supply and fit.
I would be looking at June time, I will put a post on the forum.
Thanks again S8.
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
When you figure this end out & find a probable shop LMK & I'll ring Misha up for your Discount
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Last edited by Thericker; 02-13-2015 at 05:29 PM.
The following users liked this post:
StirlingMoss722 (10-10-2018)
#42
MBWorld Fanatic!
Join Date: Aug 2003
Location: In my garage
Posts: 8,604
Received 1,077 Likes
on
864 Posts
E55, GLS450, GL63, GLE350
You may want to check out the SPDV6 widebody. http://www.spdv6.com/shopping/pgm-mo....php?id=4&=SID
#44
Super Member
My car is being put together in the UK however I cannot recommend the people doing the work as they have had the car for 5 months.
Can someone talk me through how to upload pictures. I have tried to do an attachment below.
Can someone talk me through how to upload pictures. I have tried to do an attachment below.
Last edited by F1BHP; 02-14-2015 at 12:08 PM.
#46
Super Member
Suhorovsky. Hey so as not to clog up this thread you can get some details of what I am dong if you look for wide-body sl600 v12 on the forum
Last edited by F1BHP; 02-14-2015 at 12:00 PM.
#47
MBWorld Fanatic!
Join Date: Aug 2003
Location: In my garage
Posts: 8,604
Received 1,077 Likes
on
864 Posts
E55, GLS450, GL63, GLE350
Looks like you went with the SR66.1 kit? What made you choose that one over the R230 kit?
http://suhorovsky-des********/mercedes-sl-r230/
http://suhorovsky-des********/mercedes-sl-r230/
#49
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2004
Location: Southern, CA.
Posts: 9,155
Likes: 0
Received 19 Likes
on
18 Posts
V12-Biturbo
PS I like your different kit choice
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
I'm sure it'll look proper once finished
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#50
Super Member
Thx. For your input. That is why I went with this kit as I was going for a R231 Black series look. It is also a look I have not seen anywhere before so should be quite unique.
What kind of boost could I get using 93 fuel and no custom wastegate. I am upgrading my turbos so I should be increasing air flow quite a bit without the extra boost however I would like to know how far I can go without the custom wastegate. Would you recommend me going down that route?
I have Carlsson 1/10 Ultra lights 20" that I got before I went down the wide body route. They only weigh just over 20lb for 20" which is great however now I am having to run huge spacers to get them to fit which is far from ideal.
I will need to order some custom offset 20" wheels for the new kit, I am not sure what to go with.
What kind of boost could I get using 93 fuel and no custom wastegate. I am upgrading my turbos so I should be increasing air flow quite a bit without the extra boost however I would like to know how far I can go without the custom wastegate. Would you recommend me going down that route?
I have Carlsson 1/10 Ultra lights 20" that I got before I went down the wide body route. They only weigh just over 20lb for 20" which is great however now I am having to run huge spacers to get them to fit which is far from ideal.
I will need to order some custom offset 20" wheels for the new kit, I am not sure what to go with.
Last edited by F1BHP; 02-14-2015 at 05:53 PM.
The following users liked this post:
StirlingMoss722 (10-10-2018)