SL55 AMG, SL63 AMG, SL65 AMG (R230) 2002 - 2011 (2003 US for SL55 and 2004 for the SL65)

SL55/63/65/R230 AMG: ECU or pulley or both, and who??

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 12-25-2004, 11:01 AM
  #1  
Junior Member
Thread Starter
 
ekazaz's Avatar
 
Join Date: Dec 2004
Location: Palm Springs, CA
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
2012 E63
ECU or pulley or both, and who??

So after reading the Autocar article on the comparo of the SL600 SL55 and SL65, I'm probably not going to take the SL65 when it comes in, I'll keep my 04 SL55. However a little tweeking might be nice. So far, here are my options:

1. Speedtuning/Oliver ECU: 532hp 550lb/ft $400
2. Powerchip ECU: 512hp 536lb/ft $1995
3. Kleeman Pulley & ECU: 538hp 566lb/ft $3700
4. Renntech Pulley & ECU: 533hp 561 lb/ft $5300
5. Brabbus Pulley & ECU: 540hp 575 lb/ft $15000

I find it interesting that they all come up with different numbers and way different prices. I'm in So. Cal and #2-5 are located in my area and it would be more convenient to skip the mail order. So here is my dilema (the above). What do I do? I'm sure someone out there has done some of these. I'd love to have opinions and testimonials, if there are any. Thanks guys.
Old 12-25-2004, 03:17 PM
  #2  
Super Member
 
v8plus4's Avatar
 
Join Date: Jun 2004
Location: 30-A
Posts: 730
Received 22 Likes on 19 Posts
2024 AMG G63, 2023 Bentley GTC Speed
Where can I find this Autocar article?
Old 12-25-2004, 07:10 PM
  #3  
Super Member
 
IanSL55's Avatar
 
Join Date: Dec 2004
Location: Irvine, California
Posts: 948
Likes: 0
Received 0 Likes on 0 Posts
'10 MB E63, '08 ML550 ('05 E55, '05 SL55, '08 E63 GONE)
Originally Posted by ekazaz
So after reading the Autocar article on the comparo of the SL600 SL55 and SL65, I'm probably not going to take the SL65 when it comes in, I'll keep my 04 SL55. However a little tweeking might be nice. So far, here are my options:

1. Speedtuning/Oliver ECU: 532hp 550lb/ft $400
2. Powerchip ECU: 512hp 536lb/ft $1995
3. Kleeman Pulley & ECU: 538hp 566lb/ft $3700
4. Renntech Pulley & ECU: 533hp 561 lb/ft $5300
5. Brabbus Pulley & ECU: 540hp 575 lb/ft $15000

I find it interesting that they all come up with different numbers and way different prices. I'm in So. Cal and #2-5 are located in my area and it would be more convenient to skip the mail order. So here is my dilema (the above). What do I do? I'm sure someone out there has done some of these. I'd love to have opinions and testimonials, if there are any. Thanks guys.
I've considered doing the Kleemann upgrades myself (at Bergwerks in El Segundo) but I've only heard feedback on the RENNtech and Powerchip. I question why the Speedtuning is so much cheaper...

Also, will these mods void the warranty?

~Ian
Old 12-25-2004, 08:17 PM
  #4  
MBWorld Fanatic!
 
CynCarvin32's Avatar
 
Join Date: Sep 2002
Posts: 2,923
Likes: 0
Received 3 Likes on 3 Posts
Mercedes Benz
at all costs I would avoid bergwerks...they dont seem to get much right... and more often than not you end up creating a real good relationship with them as you have to go back 2-3 times to get anything to work as they said.

Go with RENNtech but go to Maridian in West LA or jsut order the parts from Florida and have a local shop install them. You can NEVER go wrong with RENNtech and they are the best tuner I have yet to see. Brabus is a joke with their 18k installed pulley kit. I can't imagine they sell many of those kits. Such a joke!
Old 12-25-2004, 09:00 PM
  #5  
Super Member
 
IanSL55's Avatar
 
Join Date: Dec 2004
Location: Irvine, California
Posts: 948
Likes: 0
Received 0 Likes on 0 Posts
'10 MB E63, '08 ML550 ('05 E55, '05 SL55, '08 E63 GONE)
Originally Posted by CynCarvin32
at all costs I would avoid bergwerks...they dont seem to get much right... and more often than not you end up creating a real good relationship with them as you have to go back 2-3 times to get anything to work as they said.

Go with RENNtech but go to Maridian in West LA or jsut order the parts from Florida and have a local shop install them. You can NEVER go wrong with RENNtech and they are the best tuner I have yet to see. Brabus is a joke with their 18k installed pulley kit. I can't imagine they sell many of those kits. Such a joke!
Interesting! Thanks for the heads up. Yes, I keep hearing good things about RENNtech. Is this the shop: www.meridianonline.us. Spiffy site but a total waste of time if you're looking for information.

Thanks!

~Ian
Old 12-25-2004, 11:43 PM
  #6  
MBWorld Fanatic!
 
IngenereAMG's Avatar
 
Join Date: Feb 2004
Location: Arizona
Posts: 3,703
Likes: 0
Received 4 Likes on 3 Posts
SL55AMG, Ferrari 348, Ferrari Testarossa, Ferrari F40, Ferrari Mondial t, Ducati 916, Indycar
Speedtuning Rocks!

I've done Oliver/Speedtuning and the results were outstanding!! Sure there is more HP and torque....but I personally don't think it needs any more. The big thing is that there is no speedlimiter!! I've done 202 out in the desert in Nevada!!! The car has also humilliated most everything at the track!!

Have fun and don't spend too much.....those other guys are crooks!!
Old 12-26-2004, 10:34 AM
  #7  
MBWorld Fanatic!
 
Schiznick's Avatar
 
Join Date: Oct 2002
Posts: 1,428
Likes: 0
Received 2 Likes on 2 Posts
SL65, E55T, Pending S65
If you pass on a SL65 based on what you read in a car mag you will be kicking yourself later....

The car is much diffderent than an SL55 or a SL600. It all depends on what you are looking for. Don't expect to drive a stock SL600 off the lot and replicate the numbers you read in the mag. I have driven both back to back, it is not even close....

Tuned may be a different story but we tackled that already.... many a thread ago.

Schiznick
Old 12-26-2004, 10:51 AM
  #8  
Senior Member
 
draggingcents2's Avatar
 
Join Date: May 2004
Location: OC
Posts: 371
Likes: 0
Received 0 Likes on 0 Posts
2005 E55
Originally Posted by IngenereAMG
I've done Oliver/Speedtuning and the results were outstanding!! Sure there is more HP and torque....but I personally don't think it needs any more. The big thing is that there is no speedlimiter!! I've done 202 out in the desert in Nevada!!! The car has also humilliated most everything at the track!!

Have fun and don't spend too much.....those other guys are crooks!!
What is Olivers number at speedtuning? I have spoke to him in the past and he is very cool and seem to know what he was saying. I am send my ECU to him once and for all.
Old 12-26-2004, 12:01 PM
  #9  
Senior Member
 
srknutson's Avatar
 
Join Date: Nov 2004
Location: Midwest USA
Posts: 431
Likes: 0
Received 1 Like on 1 Post
2004 S500 & 2011 Mini JCW
Oliver ECU K&N

I recently sent my ECU to Oliver and I haven't driven the car the recommended 200 to 300 miles to get 100% of the upgrade benefit but everything works great! If the Hp/Torque numbers are right for my car, this is the best value upgrade! K&N's should give you another 5hp per side. I can't see paying 4K to 5K more for similar numbers. I was without my car for 5 days, however there was an Austrian holiday to deal with in the middle of the week. Oliver get's some of his flash files there so if you want your ECU back ASAP make sure your not dealing with the endless holiday's they have there.

Steve
Old 12-28-2004, 09:34 PM
  #10  
MBWorld Fanatic!
 
IngenereAMG's Avatar
 
Join Date: Feb 2004
Location: Arizona
Posts: 3,703
Likes: 0
Received 4 Likes on 3 Posts
SL55AMG, Ferrari 348, Ferrari Testarossa, Ferrari F40, Ferrari Mondial t, Ducati 916, Indycar
Originally Posted by draggingcents2
What is Olivers number at speedtuning? I have spoke to him in the past and he is very cool and seem to know what he was saying. I am send my ECU to him once and for all.

Here is the link to Oliver's site. All the #'s will be there.http://www.speedtuningusa.com./

Where can I get the K&N's for the SL55. Does anyone know the part numbers?

Last edited by IngenereAMG; 12-29-2004 at 01:06 AM.
Old 12-28-2004, 10:33 PM
  #11  
Senior Member
 
draggingcents2's Avatar
 
Join Date: May 2004
Location: OC
Posts: 371
Likes: 0
Received 0 Likes on 0 Posts
2005 E55
Originally Posted by IngenereAMG
Here is the link to Oliver's site. All the #'s will be there.

Where can I get the K&N's for the SL55. Does anyone know the part numbers?
did not get the link send agian please
Old 12-28-2004, 10:36 PM
  #12  
Senior Member
 
draggingcents2's Avatar
 
Join Date: May 2004
Location: OC
Posts: 371
Likes: 0
Received 0 Likes on 0 Posts
2005 E55
Originally Posted by draggingcents2
did not get the link send agian please
the k&n's are at Performance Products. I found them with yahoo search for them. Click it and find filter for your car.

http://www.performanceproducts.com/P...producttype=20
Old 12-29-2004, 12:25 AM
  #13  
Member
 
OzSL55's Avatar
 
Join Date: Jul 2004
Location: Sydney, AUS
Posts: 213
Received 0 Likes on 0 Posts
'19 GT 4 63s ,'17 Bentley Bentayga, '06 Ford GT
Arrow

Originally Posted by IngenereAMG
Here is the link to Oliver's site. All the #'s will be there.

Where can I get the K&N's for the SL55. Does anyone know the part numbers?
Actually, you don't even need to go to K&Ns, you can use another good brand of high flow aftermarket filters and save a few $$. My upgrade included a set of BMC panel filters http://www.bmcairfilters.com/products.asp . I drove the car before and after the filters and I can tell you there is a noticeable improvement in throttle response as well as a few extra HP.
Old 01-01-2005, 03:12 PM
  #14  
Junior Member
Thread Starter
 
ekazaz's Avatar
 
Join Date: Dec 2004
Location: Palm Springs, CA
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
2012 E63
What is your reaction to Oliver/Speedtuning's work. Can you feel the difference? Has the exhaust sound changed?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: SL55/63/65/R230 AMG: ECU or pulley or both, and who??



All times are GMT -4. The time now is 12:19 AM.