SLK/R170: Reset Service Indicator
#1
Member
Thread Starter
Join Date: Aug 2002
Location: San Francisco, CA
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
2008 M6 Vert
Reset Service Indicator
Does anyone know if I can reset the service indicator by myself. I am planning to do the oil change myself and was wondering if I could reset the service indicator myself. It would surely save me a trip to my dealer which is about 1.5 hours away.
Thanks in advance.
Thanks in advance.
#4
Turn the key in the steering lock to position 1.
Press button to the left of the speedometer and hold it in.
Turn the key in the steering lock to position 2.
After about 10 seconds an audible signal will be heard, and the maintenance indicator will display 15,000 km/7,500 miles.
Release button to the left of the speedometer.
Hope this helps.
Press button to the left of the speedometer and hold it in.
Turn the key in the steering lock to position 2.
After about 10 seconds an audible signal will be heard, and the maintenance indicator will display 15,000 km/7,500 miles.
Release button to the left of the speedometer.
Hope this helps.
#7
Member
Thread Starter
Join Date: Aug 2002
Location: San Francisco, CA
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
2008 M6 Vert
I tried it out and it didnt work. Also looked through my manual and it doesnt show anything on it. Perhaps US cars do not have this feature?
Hmmm go figure
Hmmm go figure
Trending Topics
#8
Member
Join Date: Dec 2002
Location: Minnesota
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
'99 SLK 230
Here's the procedure from alldata.com.
Active Service System (ASSYST) Operating Notes
Displaying remaining distance, remaining time or service exceeded when vehicle stationary or when driving on driver request:
Wake-up instrument cluster.
Start switch in position "2" or driving.
Operate reset button for trip counter twice within 1 s : the current remaining distance, the current remaining time or the current service exceeded appears.
Resetting ASSYST after oil change (oil change reset) at instrument cluster:
Move start switch into position "2".
Within the first 4 s after moving start switch into position "2": press reset button for trip counter twice within one second. The display for the service request is thus activated for 10 s .
Within these 10 s move start switch into position "0". The service request continues to be displayed.
Press reset button for trip counter and hold pressed.
Move start switch into position "2".
Continue to hold reset button for trip counter pressed (about 10 s ) until the signal sounds and the new start distance appears in the display.
Displaying remaining distance, remaining time or service exceeded when vehicle stationary or when driving on driver request:
Wake-up instrument cluster.
Start switch in position "2" or driving.
Operate reset button for trip counter twice within 1 s : the current remaining distance, the current remaining time or the current service exceeded appears.
Resetting ASSYST after oil change (oil change reset) at instrument cluster:
Move start switch into position "2".
Within the first 4 s after moving start switch into position "2": press reset button for trip counter twice within one second. The display for the service request is thus activated for 10 s .
Within these 10 s move start switch into position "0". The service request continues to be displayed.
Press reset button for trip counter and hold pressed.
Move start switch into position "2".
Continue to hold reset button for trip counter pressed (about 10 s ) until the signal sounds and the new start distance appears in the display.
#9
Member
Thread Starter
Join Date: Aug 2002
Location: San Francisco, CA
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
2008 M6 Vert
I just tried it out today. It works. Had to be really quick with the fingers. It felt like getting a special feature on a video game.
Thanks man.
Thanks man.