*** 80mm AMG Throttle Body ***
#402
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
This is starting to get interesting!!!!!
This TB is going to make some serious POWER!! Mark my words! You guys with K2 or EVO 2 are going to see some big gains!
I went back to the dyno today. I put my original tune back in the ECU a few weeks ago (The one that gave me my 472rwhp, 547rwtq pull in my sig).. The last time I went to the dyno with this tune (1.5weeks ago), I could only manage 435rwhp, 542rwtq which is a drop of 37rwhp. VERY VERY LEAN 16:1 A/F.. Too dangerous to push the way it was.
Today, equipped with my trusty Star Diagnostics machine, I went to see if I could stabilize the tune and make it a bit safer to drive until I get my custom tune remapped for all the mods.
I used DAS to add some fuel to this poor thing and managed a *** 490rwhp, 545rwtq!!!!!!!!!! *** I wasnt able to print it out because their printer acted up (just my luck!).. But I am going back tomorrow or the next day to get the printout and see if I can mess around with the timing using DAS..
The graph was still all over the place.. A/F was still 15:1 from 1,500RPM to 3,500RPM.. The extra fuel I added showed up at 3,500RPM and was showing 13:1 until 5,000RPM where it went to 12:1 A/F.
At 5,000RPM the hp & tq curve was zig-zagging up and down like crazy.. This indicates either the ECU is pulling timing or there is still some crappy load limiter in my car and ECU is pulling power..
In any case, with a messed up tune and very sluggish car, I am at 490rwhp, 545rwtq now!!!!!!!
When this thing gets a proper tune, I should be WELL over the 500rwhp mark. I am aiming for 515rwhp 560rwtq...
Stay tuned...
This TB is going to make some serious POWER!! Mark my words! You guys with K2 or EVO 2 are going to see some big gains!
I went back to the dyno today. I put my original tune back in the ECU a few weeks ago (The one that gave me my 472rwhp, 547rwtq pull in my sig).. The last time I went to the dyno with this tune (1.5weeks ago), I could only manage 435rwhp, 542rwtq which is a drop of 37rwhp. VERY VERY LEAN 16:1 A/F.. Too dangerous to push the way it was.
Today, equipped with my trusty Star Diagnostics machine, I went to see if I could stabilize the tune and make it a bit safer to drive until I get my custom tune remapped for all the mods.
I used DAS to add some fuel to this poor thing and managed a *** 490rwhp, 545rwtq!!!!!!!!!! *** I wasnt able to print it out because their printer acted up (just my luck!).. But I am going back tomorrow or the next day to get the printout and see if I can mess around with the timing using DAS..
The graph was still all over the place.. A/F was still 15:1 from 1,500RPM to 3,500RPM.. The extra fuel I added showed up at 3,500RPM and was showing 13:1 until 5,000RPM where it went to 12:1 A/F.
At 5,000RPM the hp & tq curve was zig-zagging up and down like crazy.. This indicates either the ECU is pulling timing or there is still some crappy load limiter in my car and ECU is pulling power..
In any case, with a messed up tune and very sluggish car, I am at 490rwhp, 545rwtq now!!!!!!!
When this thing gets a proper tune, I should be WELL over the 500rwhp mark. I am aiming for 515rwhp 560rwtq...
Stay tuned...
#403
MBWorld Fanatic!
Join Date: Apr 2006
Location: Central New Jersey
Posts: 1,063
Likes: 0
Received 0 Likes
on
0 Posts
CLK63 Black, E350 Wagon, Supercharged Denali, Lotus Elise, Tesla Model 3 Dual-Motor.
"When this thing gets a proper tune, I should be WELL over the 500rwhp mark. I am aiming for 515rwhp 560rwtq..."
Vic, That would equate to how much flywheel HP & TQ...
Vic, That would equate to how much flywheel HP & TQ...
Last edited by MACHC5; 09-25-2006 at 11:16 PM.
#405
Super Member
Boy am I late in the game... so much time planning that damn slip and slide, aka California Speedway...
Can I get a VRKit tooo???
You should pretty much count me in on all your projects...
LMK,
Loren
Can I get a VRKit tooo???
You should pretty much count me in on all your projects...
LMK,
Loren
#406
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
No problem my friend.. If you want one I will order the parts this morning to assemble the kit. If I get it in today, I should have the parts by Friday and we can get started on the build.
Paypal me $2825 CDN to vrus1@hotmail.com.. That covers the paypal fees and everything else except shipping which I'll quote when its ready to ship out.
Loren is Kit #11.
Paypal me $2825 CDN to vrus1@hotmail.com.. That covers the paypal fees and everything else except shipping which I'll quote when its ready to ship out.
Loren is Kit #11.
#407
MBWorld Fanatic!
Hello Victor,
Good numbers...but I was told by my cheap tuner that with the pulleys I have diameter (stock 156 vs ASP 182) I am around 610-620 HP mark as well...can it be true ???
Also I thought best A/F ratio is 1:1 in the middle...that what I have and 0.92 on TOP... did ECU here...
You have all those mods and dont have an LSD ???
I am thinkign btw TB and LSD now
#408
MBWorld Fanatic!
Join Date: Jan 2004
Location: Salt Lake City (but not Morm)
Posts: 7,092
Likes: 0
Received 12 Likes
on
10 Posts
2003 E55 & 2014 GL550
Good numbers...but I was told by my cheap tuner that with the pulleys I have diameter (stock 156 vs ASP 182) I am around 610-620 HP mark as well...can it be true ???
"Hi hoooo, Hi hoooo, it's off to the dyno you goooooo"
If you wouldn't mind throwing it up on the dyno, we would all love to check it out. She pulls 620hp, bet ASP would sell a LOT of pulleys.
I know everyone is super busy, so if you can't get over there, no biggee.
#409
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Mike,
Everyone uses different correction numbers to calculate HP. Your tuner is probably using a higher correction factor like 19% or 20% and coming up with 610hp.
I am not sure what you are referring to by saying 1:1 or 0.92.. Is that the lambda sensor values?
My A/F right now is all messed up because I cant do very much with Star.. I just added fuel to make it safer.. I am waiting on my custom tune to get done. I am not sure what my final A/F curve will look like. I'll leave that up to the pros.
I dont need LSD for going in a straight line; I just modulate throttle with right foot. I just hate the way the car behaves going around corners. That's the only reason I would add LSD. I am going to put the Quaiffe unit in, but I am holding off because 2 people have reported the transmission "clunking" when changing gears.. I am waiting for issues to be resolved before creating any more headaches for myself..
Everyone uses different correction numbers to calculate HP. Your tuner is probably using a higher correction factor like 19% or 20% and coming up with 610hp.
I am not sure what you are referring to by saying 1:1 or 0.92.. Is that the lambda sensor values?
My A/F right now is all messed up because I cant do very much with Star.. I just added fuel to make it safer.. I am waiting on my custom tune to get done. I am not sure what my final A/F curve will look like. I'll leave that up to the pros.
I dont need LSD for going in a straight line; I just modulate throttle with right foot. I just hate the way the car behaves going around corners. That's the only reason I would add LSD. I am going to put the Quaiffe unit in, but I am holding off because 2 people have reported the transmission "clunking" when changing gears.. I am waiting for issues to be resolved before creating any more headaches for myself..
Hello Victor,
Good numbers...but I was told by my cheap tuner that with the pulleys I have diameter (stock 156 vs ASP 182) I am around 610-620 HP mark as well...can it be true ???
Also I thought best A/F ratio is 1:1 in the middle...that what I have and 0.92 on TOP... did ECU here...
You have all those mods and dont have an LSD ???
I am thinkign btw TB and LSD now
Good numbers...but I was told by my cheap tuner that with the pulleys I have diameter (stock 156 vs ASP 182) I am around 610-620 HP mark as well...can it be true ???
Also I thought best A/F ratio is 1:1 in the middle...that what I have and 0.92 on TOP... did ECU here...
You have all those mods and dont have an LSD ???
I am thinkign btw TB and LSD now
#410
MBWorld Fanatic!
I will DYNO later...but Rflow with such mods pulled 494 on the wheels !!!
Vic...
Yes...may be its Lambda sensors...not sure...
I think I wanna LSD but yet more power would also be nice ...
Vic...
Yes...may be its Lambda sensors...not sure...
I think I wanna LSD but yet more power would also be nice ...
#411
MBWorld Fanatic!
Join Date: Jan 2004
Location: Salt Lake City (but not Morm)
Posts: 7,092
Likes: 0
Received 12 Likes
on
10 Posts
2003 E55 & 2014 GL550
I'd be interested to see what a car with all that power, but no LSD does at the track. It's just gotta be spinning and yellow triangle all over the place.
Sounds just fierce though!!
Congrats!
Will stop hijacking V's thread now.
Sounds just fierce though!!
Congrats!
Will stop hijacking V's thread now.
#414
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Standard dyno sniffer-in-the-tailpipe..
I am going to get a proper lambda sensor welded into my pipes though since I will be doing alot of changes to this car... LOL...
Thanks buddy! Money received and parts ordered.
I am going to get a proper lambda sensor welded into my pipes though since I will be doing alot of changes to this car... LOL...
Originally Posted by Loren
You have Canadian dollars! Thanks buddy... really appreciate all your effort on all of these projects...
#415
Banned
Join Date: Mar 2006
Location: Southern California
Posts: 2,855
Likes: 0
Received 2 Likes
on
2 Posts
S600TT, R350
A/F was still 15:1 from 1,500RPM to 3,500RPM..
#416
Super Moderator
Today, equipped with my trusty Star Diagnostics machine, I went to see if I could stabilize the tune and make it a bit safer to drive until I get my custom tune remapped for all the mods.
I used DAS to add some fuel to this poor thing and managed a *** 490rwhp, 545rwtq!!!!!!!!!! *** I wasnt able to print it out because their printer acted up (just my luck!).. But I am going back tomorrow or the next day to get the printout and see if I can mess around with the timing using DAS..
I used DAS to add some fuel to this poor thing and managed a *** 490rwhp, 545rwtq!!!!!!!!!! *** I wasnt able to print it out because their printer acted up (just my luck!).. But I am going back tomorrow or the next day to get the printout and see if I can mess around with the timing using DAS..
Where in DAS are you able to add fuel ?
#417
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Interesting.. I didnt know that.. Thanks!!
Don't know if I should be giving away ALL my secrets.. LOL..
Drivetrain->ME 2.8-> Adaptations->I cant remember the title, but, you'll see it there.. If I fire it up tomorrow morning I'll post the exact menu sub item.
You can add or remove fuel in 10% increments..
WARNING: IT IS ADDITIVE TO THE LAST COMMAND.. In other words, if you say +10% and save, the next time you go in, it will be at 0% again, if you do another 10% it will be ADDITIVE to your previous because the change is saved in the ECU immediately.
Drivetrain->ME 2.8-> Adaptations->I cant remember the title, but, you'll see it there.. If I fire it up tomorrow morning I'll post the exact menu sub item.
You can add or remove fuel in 10% increments..
WARNING: IT IS ADDITIVE TO THE LAST COMMAND.. In other words, if you say +10% and save, the next time you go in, it will be at 0% again, if you do another 10% it will be ADDITIVE to your previous because the change is saved in the ECU immediately.
Originally Posted by awiner
Where in DAS are you able to add fuel ?
#418
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
I never made it to this shop this afternoon to pick up the next 3 TB inlets.. I'll be going by tomorrow (Saturday) and picking them up.. They'll be packed and ready to go for Monday.. Fedex Tracking # to follow Monday night.
Have a great weekend!!
Have a great weekend!!
#419
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
I really hate making posts like this, but... The 3 TBs that were supposed to ship are not ready yet..
I was supposed to get them picked up from the porting shop on Saturday.. He never finished them... Today he was too busy and never got to them.. He said tomorrow morning he will "complete" the work on all 3 and I should be able to pick them up in the afternoon..
Sorry guys...
I was supposed to get them picked up from the porting shop on Saturday.. He never finished them... Today he was too busy and never got to them.. He said tomorrow morning he will "complete" the work on all 3 and I should be able to pick them up in the afternoon..
Sorry guys...
#422
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
I'm really not sure to be honest... The man to talk to is Vadim.. He knows the C32 inside & out (since he owns one also).. Send him a quick email and get his opinion on it.. He'll tell you if it'll work and if it's even worthwhile to do to your car.
#423
Super Member
Join Date: Oct 2002
Location: Atlanta, GA
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
SLK32