*** 80mm AMG Throttle Body ***
#426
MBWorld Fanatic!
Join Date: Jul 2004
Location: Diamond Bar & Anaheim, CA
Posts: 1,194
Likes: 0
Received 2 Likes
on
2 Posts
2003 C-Class Sportcoupe
I think it would be worthwhile... I had my motor port and polished on both the intake and exhaust side of the cylinder manifolds, plus the exhaust from the headers back are all new. Actually, Josh at HOP recommended making a larger throttle body for my car. I think it should bolt right up, since the superchargers are almost the same. I've already had the cylinder heads flow bench tested and it showed 15% gain. Instead of having HOP "re-invent the wheel" by copying your kit, I thought it would be easier to just get the VRUS kit.
#428
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
No problem Michael.. You let me know whenever you are ready and I'll get one for you.. I think there are 7 or 8 TBs left in inventory at this point. I will verify..
#432
MBWorld Fanatic!
Join Date: Jan 2004
Location: Salt Lake City (but not Morm)
Posts: 7,092
Likes: 0
Received 12 Likes
on
10 Posts
2003 E55 & 2014 GL550
Install date is set. Monday of next week. 10/9/2006 is D Day.
If none of the guys beat me to it, should have some results next week.
The guys at the shop are in awe of the VRUS knowledge.
"You know you need a new Y Pipe, this guy in Canada even gave you the Y Pipe you need and everything??"
Me, "Yup"
If none of the guys beat me to it, should have some results next week.
The guys at the shop are in awe of the VRUS knowledge.
"You know you need a new Y Pipe, this guy in Canada even gave you the Y Pipe you need and everything??"
Me, "Yup"
#433
Super Member
Join Date: Oct 2002
Location: Atlanta, GA
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
SLK32
I think it would be worthwhile... I had my motor port and polished on both the intake and exhaust side of the cylinder manifolds, plus the exhaust from the headers back are all new. Actually, Josh at HOP recommended making a larger throttle body for my car. I think it should bolt right up, since the superchargers are almost the same. I've already had the cylinder heads flow bench tested and it showed 15% gain. Instead of having HOP "re-invent the wheel" by copying your kit, I thought it would be easier to just get the VRUS kit.
#434
MBWorld Fanatic!
Join Date: Jan 2004
Location: Salt Lake City (but not Morm)
Posts: 7,092
Likes: 0
Received 12 Likes
on
10 Posts
2003 E55 & 2014 GL550
I've already had the cylinder heads flow bench tested and it showed 15% gain.
Hey V, any idea if ours would see the same results. That would be a nice 90hp for me, suhweet!!!
#435
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
I was told expect 30 - 40hp by cleaning up the exhaust ports only and opening them up and also port matching the headers to the new size. This is great for someone who doesnt want to tear down the heads and go hog-wild with them.
The number they threw around for what I want done is 70-90hp.. We'll see soon enough..
Jim,
Tell your shop thanks for kind words! And tell them not to be afraid to call me on my cell if they have any questions about the install.. Its pretty straight forward so they should have no trouble, but, I am here if they need me.
Good luck buddy!
He called and left a message on my voicemail at 8:30pm tonight. He said all 3 were finished so I will swing by and go pick them up in the morning.. Was too tired to drag my butt across town to go get them tonight.
They'll be packed and out via Fedex tomorrow afternoon.. The fedex system will email you guys tracking #'s automatically.. They'll go international economy so you'll have them in 2 days.
Darren, You wuss!!
(j/k buddy)... You better hurry up and decide because there are only 7 left in inventory and I've got 4 names already.. LOL...
Dave,
hahaha.. See above post to Darren..![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
The number they threw around for what I want done is 70-90hp.. We'll see soon enough..
Whoa, that is pretty impressive!! How much did that run ya??
Hey V, any idea if ours would see the same results. That would be a nice 90hp for me, suhweet!!!
Hey V, any idea if ours would see the same results. That would be a nice 90hp for me, suhweet!!!
Tell your shop thanks for kind words! And tell them not to be afraid to call me on my cell if they have any questions about the install.. Its pretty straight forward so they should have no trouble, but, I am here if they need me.
Good luck buddy!
Originally Posted by JakPro1
Install date is set. Monday of next week. 10/9/2006 is D Day.
If none of the guys beat me to it, should have some results next week.
The guys at the shop are in awe of the VRUS knowledge.
"You know you need a new Y Pipe, this guy in Canada even gave you the Y Pipe you need and everything??"
Me, "Yup"
If none of the guys beat me to it, should have some results next week.
The guys at the shop are in awe of the VRUS knowledge.
"You know you need a new Y Pipe, this guy in Canada even gave you the Y Pipe you need and everything??"
Me, "Yup"
He called and left a message on my voicemail at 8:30pm tonight. He said all 3 were finished so I will swing by and go pick them up in the morning.. Was too tired to drag my butt across town to go get them tonight.
They'll be packed and out via Fedex tomorrow afternoon.. The fedex system will email you guys tracking #'s automatically.. They'll go international economy so you'll have them in 2 days.
Darren, You wuss!!
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
Originally Posted by darren_dallas
All you guys are killing us Where's the dyno results...someone get out there and get this TB test!
Cheerio,
Darren
Cheerio,
Darren
Dave,
hahaha.. See above post to Darren..
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
Originally Posted by Mad TKD
Yeah I know. The only thing holding me back on the TB is someone to show proof of Gains.
#436
Administrator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
Hehehehe.........I bet you wish you would have never gotten involved.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Take care Victor.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Last edited by Rock; 10-03-2006 at 10:45 PM.
#442
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Apple '55, Rock, BenzGal
Your TB Kits have been picked up by Fedex and are being sent 2 day express.. You'll have them by Friday!!!![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
That takes care of Kit #7,8,9.
The order of the remaining kits (#10 - #14) is as follows:
- JSpeed
- Loren
- E55 Baller
- E55 Russ
- Fleebee
Your TB Kits have been picked up by Fedex and are being sent 2 day express.. You'll have them by Friday!!!
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
That takes care of Kit #7,8,9.
The order of the remaining kits (#10 - #14) is as follows:
- JSpeed
- Loren
- E55 Baller
- E55 Russ
- Fleebee
#443
Administrator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
SWEEEEEET!!!!!
I just set up the TB install for Saturday. I plan on being at the track on Tuesday and hopefully we will see some new and improved 1/4 mile #s.
Much thanks Vic.
I just set up the TB install for Saturday. I plan on being at the track on Tuesday and hopefully we will see some new and improved 1/4 mile #s.
Much thanks Vic.
#444
MBWorld Fanatic!
Join Date: Aug 2004
Location: school west coast-Summer Internships Va and Bmore
Posts: 1,287
Likes: 0
Received 0 Likes
on
0 Posts
E55 (for sale if the right offer comes along)...too many others to list
Thank you again Vic. I will let you guys know the gain per the dyno next week. VIC for president!
#445
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
You are both very welcome!! Thanks for trusting me to put this together for you guys.
Just please remember that when these are installed that you will be increasing the airflow to the motor quite a bit. While the install is happening disconnect the battery and then reconnect it at the end of the install. This will allow the ECU to relearn once you start the car back up again.
Give it 150 - 200miles BEFORE you do the dyno. That will give the ECU sufficient time to adjust to the new airflow.
Good luck to all of you guys!
Let me know what you think of the kit once you've received it and had a chance to look it over.. Any suggestions or feedback from anyone is welcome.
P.S-> Dont forget.. Follow my suggestions a page or two back to test the electronic functioning of the TB before half your motor is ripped apart. Once that new S/C inlet gets installed, the stock TB WILL NOT work anymore and your car will be stranded there should there be a problem with the TB. Getting parts from Germany takes 2 or 3 days.
Just please remember that when these are installed that you will be increasing the airflow to the motor quite a bit. While the install is happening disconnect the battery and then reconnect it at the end of the install. This will allow the ECU to relearn once you start the car back up again.
Give it 150 - 200miles BEFORE you do the dyno. That will give the ECU sufficient time to adjust to the new airflow.
Good luck to all of you guys!
Let me know what you think of the kit once you've received it and had a chance to look it over.. Any suggestions or feedback from anyone is welcome.
P.S-> Dont forget.. Follow my suggestions a page or two back to test the electronic functioning of the TB before half your motor is ripped apart. Once that new S/C inlet gets installed, the stock TB WILL NOT work anymore and your car will be stranded there should there be a problem with the TB. Getting parts from Germany takes 2 or 3 days.
#446
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
During my drive home tonight I made a decision that this will be the last run of TBs.
They take ALOT of my time to put together and coordinate and I need to start concentrating on the Heads & Twin Turbo project.
I ask that any of you that are on the fence please decide if you want one within the next day or two, because once I run this last batch I wont get back to them for a while. I've ordered the parts for most of the kits already but I havent started the CNC plate machining yet. I need to make the CNC plates all at once so I will wait until Monday of next week to put the order in for the CNC plates.
Don't mean to pressure you guys, but, it makes it alot easier for me to do them in batches rather than 1 at a time.
They take ALOT of my time to put together and coordinate and I need to start concentrating on the Heads & Twin Turbo project.
I ask that any of you that are on the fence please decide if you want one within the next day or two, because once I run this last batch I wont get back to them for a while. I've ordered the parts for most of the kits already but I havent started the CNC plate machining yet. I need to make the CNC plates all at once so I will wait until Monday of next week to put the order in for the CNC plates.
Don't mean to pressure you guys, but, it makes it alot easier for me to do them in batches rather than 1 at a time.
#447
MBWorld Fanatic!
During my drive home tonight I made a decision that this will be the last run of TBs.
They take ALOT of my time to put together and coordinate and I need to start concentrating on the Heads & Twin Turbo project.
I ask that any of you that are on the fence please decide if you want one within the next day or two, because once I run this last batch I wont get back to them for a while. I've ordered the parts for most of the kits already but I havent started the CNC plate machining yet. I need to make the CNC plates all at once so I will wait until Monday of next week to put the order in for the CNC plates.
Don't mean to pressure you guys, but, it makes it alot easier for me to do them in batches rather than 1 at a time.
They take ALOT of my time to put together and coordinate and I need to start concentrating on the Heads & Twin Turbo project.
I ask that any of you that are on the fence please decide if you want one within the next day or two, because once I run this last batch I wont get back to them for a while. I've ordered the parts for most of the kits already but I havent started the CNC plate machining yet. I need to make the CNC plates all at once so I will wait until Monday of next week to put the order in for the CNC plates.
Don't mean to pressure you guys, but, it makes it alot easier for me to do them in batches rather than 1 at a time.
#449
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Thanks guys! I'll wait until Monday morning and then order everything at once.. This will give anyone else a chance to get in.
Kit #15 - jmf003
Kit #16 - rflow306
Kit #15 - jmf003
Kit #16 - rflow306