Mods: Kleemann TS6's and CF Diffuser
04-07-2007, 05:23 PM
#1
Super Member
Thread Starter
Mods: Kleemann TS6's and CF Diffuser
I had a chance to mount my Kleemann TS6's this morning. These things are sick! I love the design! Before anyone says lower it. I KNOW! It’s on the road map and will happen soon. Sorry for the crappy pictures it's gloomy outside with flurries.
I also installed the CF Diffuser on the rear bumper. The original plastic POS was a PITA to remove. It took Patience, razor blade, pliers, and adhesive remover to get the thing off. The installation took less then a minute. I could not be happier with the results. I have the CF front lip coming too. Both parts were supplied by Vincent at Eurorev.com. He was the best, good price and fast shipping. The CF quality was perfect, no flaws!
I also installed the CF Diffuser on the rear bumper. The original plastic POS was a PITA to remove. It took Patience, razor blade, pliers, and adhesive remover to get the thing off. The installation took less then a minute. I could not be happier with the results. I have the CF front lip coming too. Both parts were supplied by Vincent at Eurorev.com. He was the best, good price and fast shipping. The CF quality was perfect, no flaws!
04-07-2007, 05:53 PM
#3
Member
Join Date: Feb 2006
Location: London, UK
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
E55 AMG
Those have got to be one of the best looking wheels out there!!!!! Beautiful!!!!
You are going to have to post some more pics once you have lowered it!!!....it will be the finishing touch!!!!
You are going to have to post some more pics once you have lowered it!!!....it will be the finishing touch!!!!
04-07-2007, 05:57 PM
#4
Super Member
Join Date: Nov 2004
Location: South Florida
Posts: 527
Likes: 0
Received 1 Like
on
1 Post
'10 Panamera S, '06 AMG CLS55, '07 Miata MX5, '02 MB SPRINTER, '99 Spec Miata Race Car (2X)
Nice mods, and great looking garage - glad to see there are others out there who actually use their garage to do stuff other than store their toys!
04-07-2007, 06:08 PM
#7
Administrator
Sandavol, the ride looks great. I'd love to hear the exhaust.
I've always been a big fan of Kleemann products and I think those wheels are sweet. I do remember another guy on this board having problems with bending at least two different TS6 wheels. He got all kinds of grief when he tried to sell them because he did not initially disclose that they had been repaired. I hope you did not buy that set, or if you did, you got a great price.
Keep the mods coming!!
PS If I lived in Denver, I would have my car at Kleemann every other week for new mods. I'm thinking K10!!!!!
I've always been a big fan of Kleemann products and I think those wheels are sweet. I do remember another guy on this board having problems with bending at least two different TS6 wheels. He got all kinds of grief when he tried to sell them because he did not initially disclose that they had been repaired. I hope you did not buy that set, or if you did, you got a great price.
Keep the mods coming!!
PS If I lived in Denver, I would have my car at Kleemann every other week for new mods. I'm thinking K10!!!!!
Last edited by Rock; 04-07-2007 at 06:11 PM.
Trending Topics
04-07-2007, 06:09 PM
#9
MBWorld Fanatic!
Join Date: Apr 2005
Location: Sin City
Posts: 2,731
Likes: 0
Received 3 Likes
on
3 Posts
12' C63 P31, 06' Supercharged Range, 08' BMW 550i
04-07-2007, 06:39 PM
#10
Super Member
Thread Starter
Thanks guys!
I try to do as much of my own work as I can myself. I have a pretty complete array of tools and lift which makes it convenient . Half the fun is doing the install and learning about the engineering.
Dragon look but don't touch lol! I highly recommend the exhaust!
I will post all pics of all future mods I do. I find it helpful when others have done this in the past. A picture goes a long way when your trying to decide on a mod.
I ready every thread on MBWorld having to do with the TS6. I did see where silversurfer had problems with his wheels bending. Pot holes will bend any wheel with enough impact. I will take my chances on the TS6's.
That Youtube video is a good representation of the Eiesnmann exhaust.
Unfortunatley for my wallet Kleemann is so close K1 will be installed in the next few weeks
I try to do as much of my own work as I can myself. I have a pretty complete array of tools and lift which makes it convenient . Half the fun is doing the install and learning about the engineering.
Dragon look but don't touch lol! I highly recommend the exhaust!
I will post all pics of all future mods I do. I find it helpful when others have done this in the past. A picture goes a long way when your trying to decide on a mod.
I ready every thread on MBWorld having to do with the TS6. I did see where silversurfer had problems with his wheels bending. Pot holes will bend any wheel with enough impact. I will take my chances on the TS6's.
That Youtube video is a good representation of the Eiesnmann exhaust.
Unfortunatley for my wallet Kleemann is so close K1 will be installed in the next few weeks
04-10-2007, 09:22 PM
#11
Super Member
Thread Starter
I just picked the car up from the dealer, 1.5 days to install the IPOD! $300 for installation the tech said it was a PITA! The day was gorgeous so I took some shot of the car with the TS6's installed. I LOVE these wheels! I received many compliments on the wheels while chit chatting at the dealership.
04-10-2007, 09:27 PM
#12
MBWorld Fanatic!
Join Date: Jan 2004
Location: Boston
Posts: 2,853
Likes: 0
Received 1 Like
on
1 Post
CLK500/Range Rover HSE/E55 AMG/Bmw 328Xi coupe/BMW 4.8x/Bmw 335i/GS350/Audi S5/E350
I just picked the car up from the dealer, 1.5 days to install the IPOD! $300 for installation the tech said it was a PITA! The day was gorgeous so I took some shot of the car with the TS6's installed. I LOVE these wheels! I received many compliments on the wheels while chit chatting at the dealership.
That looks SICK man..... Congrats... Look WAY better than those replicas u had on! Hey PM me your number I need give you a buzz. YOur pully is on its way.... Thanks!
Christian
04-11-2007, 01:55 PM
#19
MBWorld Fanatic!
Join Date: Mar 2007
Location: Charlotte, NC
Posts: 1,063
Likes: 0
Received 2 Likes
on
2 Posts
2002 S430, 2004 Cobra, 2004 Tahoe
looks great man, typically speaking, the IPOD install takes about 4 hours. Also, i know im a perfectionist, does the outside tip on passenger side look a little low?
04-11-2007, 02:30 PM
#20
Super Member
Thread Starter
The tips were measure to the mm to provide the same distance all the way around the opening. I was in the shop when they were doing the work I am very picky when it comes to that type of stuff too.
