emoving

I got i,,,, I got it,,, I got it,,, I had to switch the pos and neg like James told me on the phone when I ordered them!!!!!!!!!!! I am a moroon when it comes to electrical!!!!! So anyway, I broke one of the pieces and am wondering if you guys think Advanced Auto will have it here is a picture! When I pulled the wires out,,,, the metal connectors that go in here broke and I cant get it to connect for power. The other side works like a champ!! Man I am a dumb ***!!!

emoving

Ok so I got all hooked up but I have to tap one ballast on the ground every time to get it to fire the bulb

I Like Soup

Excellent! While I've read the entire thread, it seems some folks are still having some issues and have questions so I figure a picture is worth a thousand words...sorry about the cliche.

:waitingpatientlyforkits!:

Yacht Master

Just like I told you way back in post #4 of this thread. And then a second time in post #20 after it was clear to me you were on the wrong track. I now understand why you are having soo much trouble. Slow down, take the time to learn from others.

emoving

Yea,,, I am a retard! Hey what about me have to keep tapping the igniter to get it to fire the bulb.

Yacht Master

How many AMG owners dose it take to change a light bulb?

Talk about cliché.

Yacht Master

Stop! That igniter can hit you with 25,000 volts, you should never handle one that is electrified. You should install the kit completely before powering it up. The igniter may be damaged from reverse polarity call James for a warranty replacement.

James@ACG

That is not right... do you have the error canceler connected on that side? If so, try switching the ballast from the left to the right and see if the problem follows. If so, sounds like possibly a bad ballast, let me know either way and i'll get you a ballast if needed.

James

I Like Soup

I think that follows more along the lines of "a priest, a rabbi, and an AMG owner walks in to a bar..."

emoving

I did,,, the right side works on both sides but the one I started onthe left works on neither unless I give it a tap or two. So that is how I eliminated the bulbs.

James@ACG

since your problem did not follow when you changed the ballast over, try one more thing and move the bulb over... you either might have received a defective bulb or damaged it during the installation. If the problem still doesn't follow, check your electrical connects as you may not be getting a good connection.

when you take the bulb out, look at the rod on the bottom of the bulb right underneath the glass portion of the bulb. Is it cracked?

James

mprsev

So has anyone successfully hooked up HIDs to E63 fog lights?

drop997stop

I have my kit sitting at home, the kit is NOT plug and play on a e63. There is a seperate adapter taht you need to lock the bulb in place thats not included

I spoke to James and he said he would get me one last week but havent heard from him.

I am wondering if these will even work a 63 due to the fog lights turning on and off everytime we turn. It will probably burn ou the bulb pretty quickly

mprsev

any update on HIDs working on the E63 fogs?

SPNJHockey

James, how about that DIY?
And thanks for swapping-out the wedge bulbs for me.