*** FEDOR DEZYN Exhaust Specials ***

Vadim @ FD · 2009-04-17 06:23:03

Ladies and Gentlemen: Now that the tax season is over and Spring is here - FEDOR DEZYN is proud to offer the following savings: 1. HEMs http://www.fedordezyn.com/MBEXHAUST/HEMadpic.JPG Our Hiflow Exhaust Manifolds (HEMs) feature: - T409 Stainless Steel Piping - Black HiTemp Ceramic Heat Coating - Steel Billet Flanges for leak free sealing - 1.75'' Primaries, biggest of all short style headers - 2.5'' Collector Body - Easy, no welding or cutting bolt on installation - 25-30HP gains on 55 Kompressors, 15-20HP on normally aspirated http://www.fedordezyn.com/MBEXHAUST/HEMSDYNO.bmp Applications for following MB and AMG models: W210 E430, E55AMG W220 S430, S500, S55 AMG, S55 Kompressor W215 CL500, CL55, CL55 Kompressor Part No. 55-1012 W211 E500, E55 Kompressor W219 CLS500, CLS55 Kompressor Part No. 55-1034 W209 CK500, CLK55 (5-speed) W203 C55 W230 SL500, SL55 Kompressor R171 SLK55 Part No. 55-1035 Regular $1499 Spring Special - $1199 Save $300. ------------------------------------------------------ 2. MidSection Pipe. http://www.fedordezyn.com/MBEXHAUST/Midsection.bmp http://www.fedordezyn.com/MBEXHAUST/Midsection2.bmp Our MidSection pipe features: - 3'' T409 Stainless Steel Piping - Direct BoltOn to stock exhaust manifolds and stock mufflers. - Will fit VRP, Evosport, Renntech or any other short headers that fit stock H-pipe - Front inlet pipe is 2.5'' vs. 2'' stock. It is as big as it can be in order to work with shorty style flanges - Front bends are modular, allowing full 3'' capability to mate to Kleemann Headers or any other custom design - Will allow us to make a RACE version of our shorty header with 3'' collector body - Has all four O2 sensor bungs. We can turn-off CELs with Powerchip software - X-pipe adds nice exotic sound - Fits CLS55, E55s, CLS63 and E63s Regular $1349 Spring Special - $1199 Save $150 For HiFlow 200 Cell Metal Core Converters please add $399 -------------------------------------------------- 3. Converter Inlet Flange Kit http://www.fedordezyn.com/MBEXHAUST/CIFK.bmp If you would like to retain your stock H-pipe, we also offer a flange kit that allows you to replace restrictive stock converter inlets. This kit comes with two custom made flanges already swedged on 2.5'' pipe and 2.5'' U-bend. This kit will work on most V8 MB/AMG models from 1998-2007. Regular $289 Spring Special - $239 Save $50 ---------------------------------------------------- 4. X-pipe. http://www.fedordezyn.com/MBEXHAUST/X-pipe.bmp X-pipe a 3?? design that replaces stock factory resonator. It?s main benefit is improvement in exhaust sound. The pipe welds directly in place of factory resonator on E55, CLS55, E63 and CLS63. It can be made to fit on S55, S63 and can be used to replace secondary cats on SL55 and SL63s. On 55s our X-pipe gives more European sound to the engine, vs. straight pipes that tend to make it sound like an American V8. On 63s, due to it?s 11.3:1 compression ratio, it adds a very nice, deep wide-open throttle roar, that it is sadly lacking from factory exhaust. Under cruise it is very mild, without any drone or resonance. Unlike universal X-pipes found on E-bay, ours is custom made to directly fit and is made from 409 stainless steel and comes with limited lifetime warranty against corrosion. Regular $549 Spring Special - $379 Save $170 --------------------------------------------- Orders can be placed by phone - 949.584.4446 or email - vadim@fedordezyn.com. And as always, thank you for listening.