Forged Pistons Were to get them
#1
MBWorld Fanatic!
Thread Starter
Join Date: Jun 2007
Location: Bloomingdale,IL
Posts: 1,378
Likes: 0
Received 4 Likes
on
3 Posts
2004 W211 E55K, GL550
Forged Pistons Were to get them
Im looking to get a set of Forged pistons for the E55. I Did a search on here and on google did'nt seem to come up with anything. So if anybody knows were and how much i can get forged pistons for i would greatly appreciate it. Thanks in advance. Also i thought i read on here somewhere that the SLR Pistons were forged and would work on our E55 Correct me if im wrong.
#2
Former Vendor of MBWorld
Im looking to get a set of Forged pistons for the E55. I Did a search on here and on google did'nt seem to come up with anything. So if anybody knows were and how much i can get forged pistons for i would greatly appreciate it. Thanks in advance. Also i thought i read on here somewhere that the SLR Pistons were forged and would work on our E55 Correct me if im wrong.
#5
MBWorld Fanatic!
Join Date: Jan 2004
Location: Salt Lake City (but not Morm)
Posts: 7,092
Likes: 0
Received 12 Likes
on
10 Posts
2003 E55 & 2014 GL550
I just can't even IMAGINE how much they would charge for 8 SLR pistons.
If you guys ever get a quote, lemme know.
I would guess around 1500 per.
Aren't stockers around 800 per from Benz?
If you guys ever get a quote, lemme know.
I would guess around 1500 per.
Aren't stockers around 800 per from Benz?
Trending Topics
#9
MBWorld Fanatic!
Thread Starter
Join Date: Jun 2007
Location: Bloomingdale,IL
Posts: 1,378
Likes: 0
Received 4 Likes
on
3 Posts
2004 W211 E55K, GL550
i just checked my all data at work and the stock pistons are about 660.00each
SO if i got them custom made would i have to send out the pistons in my car to JE pistons or how ever or how does that work. Thanks again guys don't know were the hell i would be with out this forum and all the help.
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#11
The stock sleeves are Alusil. I had my piston skirts coated at Swain to work with the bore material. I'm sure they can give recommendations on whether this is needed or not.
If I had to do it over, I would have resleeved the block and tried to shoot for 6.0L
If I had to do it over, I would have resleeved the block and tried to shoot for 6.0L
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
#13
MBWorld Fanatic!
Join Date: Aug 2003
Location: In my garage
Posts: 8,576
Received 1,071 Likes
on
859 Posts
E55, GLS450, GL63, GLE350
Most are Alusil. J&E does not make a piston that will work in an Alusil bore. The only piston manufacturers that have extensive knowledge and actually make pistons that work and last in the Alusil bore are Kolbenschmidt and Mahle. Don't waste your engine trying to make another piston work. The only other proven options are to cote the bores with Nikasil or resleave with iron cylinder liners.
#14
PLATINUM SPONSOR
I run wiseco`s and Nickasil coated bore.. Had to shim rod to piston clearance though. Wiseco and few others can not forge the pistons to the narrow piston to rod tolerances we need. My set up works well and takes a lot of abuse.. I now have 16K on my build.
CP would be a good choice, if they can meet the tolerances..
I prefer Nickasil over Alumisil..
CP would be a good choice, if they can meet the tolerances..
I prefer Nickasil over Alumisil..
__________________
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
#16
PLATINUM SPONSOR
Most rod companies will custom build them for you, just send a stocker.. Our stock rods are made damn tough and we have 6 bolt cross drilled mains..
__________________
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
#17
Out Of Control!!
#18
MBWorld Fanatic!
#19
Former Vendor of MBWorld
Join Date: Oct 2008
Location: Long Island, NY
Posts: 1,181
Likes: 0
Received 4 Likes
on
4 Posts
Whatever we're tuning!
I've used Oliver a number of times and their products are awesome!
http://www.oliverconnectingrods.com/story.html
http://www.oliverconnectingrods.com/story.html
#23
Former Vendor of MBWorld
#24
MBWorld Fanatic!
Thread Starter
Join Date: Jun 2007
Location: Bloomingdale,IL
Posts: 1,378
Likes: 0
Received 4 Likes
on
3 Posts
2004 W211 E55K, GL550
Yes that is the reason why i need to replace or over haul my engine. Cyl 8 Piston has a quarter sized hole melted through the piston
trying understand why this happened. But needless to say im thinking maybe i can get the forged pistons & maybe a ported and polished head installed if the dealer is willing to do the install. My friend is my S.A
SO this may work.
![Frown](https://mbworld.org/forums/images/smilies/frown.gif)
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#25
MBWorld Fanatic!
Join Date: Aug 2003
Location: In my garage
Posts: 8,576
Received 1,071 Likes
on
859 Posts
E55, GLS450, GL63, GLE350
Unless your cylinder wall is damaged, just rehone the cylcinder and replace with a stock piston and call it a day. A set of Mahle or Kolbenschmidt forged pistons will run around $4,000 but they will work.