djrabbi

Hey Guys,

Wondering if the SL exhausts fit the E-Classes? I am getting a good deal on a exhaust off an SL so need to know asap! i think I would need to extend hangers and hoping thats all?

tbal

Will fit, lots room. Need custom hangers, tips might have to be adjusted/extended.

BenzoBoi

+1...will definitely fit.

I thought someone on here already slapped on a set of SL55 mufflers on the E55, no?

djrabbi

my only concern was modding it too much and wouldnt be worth it, rather pay for something that already fits.......

Hammer Down

are you talking about the set on ebay?

djrabbi

yeah the SL ones....i asked him if its clamped or welded but no reply yet

http://cgi.ebay.com/ebaymotors/ws/eB...ht_3442wt_1202

tbal

Me lol

djrabbi

I want AMG exhaust

tbal

Wrong link? You mean these http://cgi.ebay.com/ebaymotors/Meist...item1c1c21bcc0 ??

djrabbi

both actually haha....SL OEM ones are back up since you said these will hide away nicely...might cut off those tips and put the CL65 tips on it?

the guy might be scammer cause he sold same set up 2 months back and its for sale again...so i messaged him if he is still selling it

tbal

This is what I mean about the tips not clearing. This is how the e55 pipes before the tips should slant to clear
http://cgi.ebay.com/ebaymotors/LIQUI...item3cb892f6f6

djrabbi

yeah i saw that....basically tips need to be extended about 4-5 inches out in order to clear.

tbal

This would be a better fit http://cgi.ebay.com/ebaymotors/OEM-W...item2a111da299

Eisenmann makes the stock exhaust for c63s so it will sound sick!

djrabbi

reallly? hmmmmm i probably wouldnt need to extend tips than

djrabbi

the piping in the back of the muffler probably will have to be cut off since it seems smaller piping and seems to have more curves? or the mufflers are on opposite sides?

tbal

I was looking to do the c63 or cls55/63 setup before I settled on the e63 mufflers... They will fit, tips will clear, muffler will fit, the end piping wont be bolt on of course, but the exhaust shop will cut the pipe off and weld to fit your exhaust...

djrabbi

i have an exhaust on my car already so it will be basically swapped.....how bout the hangers?

tbal

Hangers arent a big deal, they can add a piece of metal to make it fit to the oem rubber...

djrabbi

pulled the trigger on the C63 exhaust...so it will sound like this but lil bit more quiet..

http://www.youtube.com/watch?v=oSCKF...x=2&playnext=2

mine right now sounds like this...

http://www.youtube.com/watch?v=I2NtbtlnUZ0

tbal

It wont sound like the c63 because of the higher displacement the 6.2L have... but it will sound close, I'm 100% confident you will be happy, basically you will have an eisenmann exhaust, anddddd it will look stock.

You have an E55 or E500?

djrabbi

E500

tbal

Oh kk, you probably will need to cut the bumper more to fit those huge tips.

tbal

Get it installed? Post sound clips asap!

djrabbi

got it installed today...very impressed........will post sound clips within couple of days!

tbal

Your welcome

Post clips!