Mod Gods showing up for the holiday!
08-31-2011, 02:55 PM
#1
PLATINUM SPONSOR
Thread Starter
Mod Gods showing up for the holiday!
Master Porter completed 3 sets of ported AMG 55 Race heads now and my lightweight evospsort rotors showed up as well. I am only using one of the 3 ported race head sets, in case someone ask. hehe ... Looks like a wrenching weekend for me and my friend Shardul. 
We are even getting some cooler weather to help out. Temps will plummet from 108 deg. to 94 deg. highs!
I did weigh the front rotors and they are 23.5lbs each VS stock 33.xxlbs each.
This will check off two of the 14 Texas mile mods in the works for October!
We are even getting some cooler weather to help out. Temps will plummet from 108 deg. to 94 deg. highs!
I did weigh the front rotors and they are 23.5lbs each VS stock 33.xxlbs each.
This will check off two of the 14 Texas mile mods in the works for October!
__________________
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
08-31-2011, 04:00 PM
#7
MBWorld Fanatic!
They look phenomenal! Can't wait to see the results in the mile and on the dyno. Want to help me with my car in a few weeks?
If I wasn't tied up this weekend I'd be digging into her. I'll bring the booze.
If I wasn't tied up this weekend I'd be digging into her. I'll bring the booze.
Trending Topics
08-31-2011, 05:15 PM
#10
MBWorld Fanatic!
Looks good!! I thought the Evo Sport rotors were drilled vs. slotted. I have seen pictures of both, my guess is you can order drilled, slotted or both.
I love these heads, and look forward to what they can do. Brooke, you are a pioneer, and have some great data to use for comparison. 180.5 is my recollection
I love these heads, and look forward to what they can do. Brooke, you are a pioneer, and have some great data to use for comparison. 180.5 is my recollection
08-31-2011, 09:06 PM
#14
PLATINUM SPONSOR
Thread Starter
Yes, going to be a fun project but clock is ticking and have yet to do ONE single mod since my last mile run.
No cams for me at this time. Like to do one major mod at a time and test it, when possible. We have to get all this stuff together and still get tuned to make it all work right.
I have a rebuilt bottom end but still used older heads, so really looking forward to fresh race heads now.
I did drive 120 miles each way to my regular dyno last weekend , to get a fresh baseline. Glad I did , as power was down in the 106 deg heat. Will put all this info together after we get parts and tune completed.
No cams for me at this time. Like to do one major mod at a time and test it, when possible. We have to get all this stuff together and still get tuned to make it all work right.
I have a rebuilt bottom end but still used older heads, so really looking forward to fresh race heads now.
I did drive 120 miles each way to my regular dyno last weekend , to get a fresh baseline. Glad I did , as power was down in the 106 deg heat. Will put all this info together after we get parts and tune completed.
__________________
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
