RedBullJnky

I've had the Eurocharged stage 3 and a few other things sitting in my garage for a little while now. My machanic, who is also my father-in-law, has been in Puerto Rico for the last 6 months and has just recently returned. Thank God! All the shops I've talked to were either charging to much or didn't know what they were doing when it came to an AMG. Now, finally we can get the show on the road.
About a month ago my IC pump finally died. I could feel the loss of power in my car. As well, the car would go into limp mode after a few runs. It never did that before. I couldn't stand having the Meziere pump in my hands and not in the car. Between work and my kids, I really didn't have the time to install the pump and HE.
Finally, this past weekend, me and my father-in-law installed the EC heat exchanger and Meziere pump. We also wired the pump to run when the key is in the on position (BIG THANKS to Shardul for answering my phone call and answering my questions). And damn, what a difference. It made me wonder how long my pump has been dead for.
Here are a couple pic of the install. Nothing different than what has already been posted (the search is always your friend). And I forgot to take one of the pump after install, sorry.

My car will be on the dyno next week to get stock numbers. And once I get Chawkins' drag set up, we will hit the track for stock times. After that is done then we will start the install of all the rest of the mods (this should be fun). And once everything is in, we will dyno again and hit the track over and over and over and over and over and...........you get the idea.
I will keep everyone posted with pics, video, dyno sheets, and time slips. There will be more to come.....

Bramage

Awesome. I look forward to seeing before . after numbers. Pump was my first mod, not by choice

The drag set up will be sick. You will LOVE it!!

GT-ER

I love installing new mods...It's FUN!

moosejaw

I saw you drive past the casino right at 12. You were driving down Stirling,
I didn't have your number or a horn in my beater or i would have honked.
Hit me up when you go to the track.

kustom2k1

Where is the dyno located? Having a father inlaw as your mechanic...priceless.

RedBullJnky

I was going to see if you wanted to go anyway. But I'll pm you my number.

RedBullJnky

Ther is a Mustang dyno at Torque in Miramar and a Dynojet at Rage Tek in Davie. And yes it is priceless. He lives with us to. lol

E55Dimon

Surprised you could wait 6 months in that fine weather. Looking forward to seeing her grow! Its a great feeling..

kustom2k1

Is EC coming by to do the tune or by remote? Let me know when it goes down Im not too far from either place.

RedBullJnky

Not sure. I will get ahold of Jerry again and find out for sure and I will definately let you know.

shardul

iTrader: (1)

Looking good

chawkins2001

Those clk rims and Hoosier's are going to launch you into next week. Make sure You have a neck brace handy

novae500

Cool to see you starting to install the mods. I'm in the same boat, headers, bosch pump, h/e waiting to be installed.

RedBullJnky

ThankYou Sir! Thanks for your help.

nanayaw6

Do you happen to have a picture other wire you tapped for getting power when the key is in the on/run position? I need to switch mine to that instead for having it come on with the first click.
Sounds like you have a fun before and after project planned. Can't wait to read your progress.

chawkins2001

Well if redbulljunky's spine is not toasted, and his teeth are not shattered from the launch, I am sure he will be pleased with the progress

RedBullJnky

Well I should be ok. Even though I do clinch my jaw a lot (old habit from boxing). Face might be sore from grinning to much, but that's about it.
How ever I am really looking forward to waking up the demon inside this engine. I want to see what she can do.

And Shardul told me which wire to tap into. Shardul is awesome and is always helping members here with what they need. A true enthusiast.

jmb614

I would've snatched up that drag setup if I had gotten to Chawkins thread first! I believe it may be the same type of setup that one of the old school members had. Forrest has this setup as well, and was kind enough to let me borrow it. Trust me when I say you will thoroughly enjoy it!

Congrats on the mods, looking forward to the results!

jmb614

Here's what I used: https://mbworld.org/forums/4735251-post10.html

RedBullJnky

Thats the one I used. Sorry didn't have a pic and I just got home.

nanayaw6

Thanks jmb614
Thanks man.
Ill delve into that before my next trip to the strip.

Lol a the the spine and launch comments on the CLK steelies. I hope I don't break something when I finally launch on my set.

alltrac

let me know when u goin to track...ill join also

RedBullJnky

Sweet. I'll let u no.

moosejaw

Will you be bringing both rides or just the E?

AKnight55

about damn time.. Looks like you have all the makings for a ten second beast... good luck look forward to the results