....Speedriven's Whipple Supercharger Upgrade....
#329
Banned
Thread Starter
#330
Banned
Thread Starter
#335
Banned
Thread Starter
The car had MBH headers, Eurocharged 82mm tb kit, FTP rail/injectors, trunk tank and H/E (unsure of brand) when it came in for the kit. We machine the tb snout without a flange. That allows us to weld on whatever flange one would want to order the kit with. If you have a MB tb or Audi or any other brand there would be no need for any adapter plate. I'd also like to try a BBK 90mm setup but I'm a bit concerned with the idle code issue that some people are experiencing even with some 82mm setup.
We also have a car scheduled to be delivered that will be getting a kit along with a set of pistons. That car will be setup to run between 22-25psi.
Last edited by Speedriven1; 07-19-2013 at 09:19 PM. Reason: .
#336
FUEL
574whp 571wtq with what I assume is same car (big throttle body, everything else stock) on 91 octane. Need to see what 93 will do!
http://www.youtube.com/watch?v=ygCBed7bRgs
http://www.youtube.com/watch?v=ygCBed7bRgs
#337
MBWorld Fanatic!
We are still working on definitive results on the stock air boxes. I noticed on the dyno that with the stock air box the black coupling between the tb Y pipe and the air box would start to collapse at wot. So what I'd like to do is put a vac gauge at couple places to see where the data goes. Pricing will range depending on what options one will order the kit with. But base price will be $6000-$6000 up to roughly $8k with every option.
At lower boost (10-11psi 500whp) there really was no definitive difference between the intakes. But with a smaller pulley we noticed the soft piping started to collapse and hold us back. We are looking into making a new tb Y-pipe and replace the soft piping with hard pipe and see where we end up with some fresh K&Ns.
The car had MBH headers, Eurocharged 82mm tb kit, FTP rail/injectors, trunk tank and H/E (unsure of brand) when it came in for the kit. We machine the tb snout without a flange. That allows us to weld on whatever flange one would want to order the kit with. If you have a MB tb or Audi or any other brand there would be no need for any adapter plate. I'd also like to try a BBK 90mm setup but I'm a bit concerned with the idle code issue that some people are experiencing even with some 82mm setup.
We also have a car scheduled to be delivered that will be getting a kit along with a set of pistons. That car will be setup to run between 22-25psi.
At lower boost (10-11psi 500whp) there really was no definitive difference between the intakes. But with a smaller pulley we noticed the soft piping started to collapse and hold us back. We are looking into making a new tb Y-pipe and replace the soft piping with hard pipe and see where we end up with some fresh K&Ns.
The car had MBH headers, Eurocharged 82mm tb kit, FTP rail/injectors, trunk tank and H/E (unsure of brand) when it came in for the kit. We machine the tb snout without a flange. That allows us to weld on whatever flange one would want to order the kit with. If you have a MB tb or Audi or any other brand there would be no need for any adapter plate. I'd also like to try a BBK 90mm setup but I'm a bit concerned with the idle code issue that some people are experiencing even with some 82mm setup.
We also have a car scheduled to be delivered that will be getting a kit along with a set of pistons. That car will be setup to run between 22-25psi.
#340
Super Member
#342
MBWorld Fanatic!
#345
MBWorld Fanatic!
Join Date: Dec 2005
Location: So Cal
Posts: 2,347
Likes: 0
Received 1 Like
on
1 Post
2006 Weistec 3.0L SC'd C55, 2006 MaxPsi PT6466 Turbo'd M3, 2019 Maserati GTS , 2020Alfa Quadrifoglio
NA 55 SC kits?
Do you guys plan on developing a kit for the M113 NA motors like the W210, W209 and even W203 AMGs or are you letting Weistec explore that market?
I would think an affordable kit for these older M113 engines would be an attractrive market if the kit is priced like you mentioned.
I would think an affordable kit for these older M113 engines would be an attractrive market if the kit is priced like you mentioned.
Last edited by AMGSC; 07-26-2013 at 01:08 AM.
#346
Banned
Thread Starter
Do you guys plan on developing a kit for the M113 NA motors like the W210, W209 and even W203 AMGs or are you letting Weistec explore that market?
I would think an affordable kit for these older M113 engines would be an attractrive market if the kit is priced like you mentioned.
I would think an affordable kit for these older M113 engines would be an attractrive market if the kit is priced like you mentioned.
#347
MBWorld Fanatic!
Join Date: Dec 2005
Location: So Cal
Posts: 2,347
Likes: 0
Received 1 Like
on
1 Post
2006 Weistec 3.0L SC'd C55, 2006 MaxPsi PT6466 Turbo'd M3, 2019 Maserati GTS , 2020Alfa Quadrifoglio
COMPETITION! That's the American way. The market will be grateful that finally these older cars will be able to keep up with the newer models!
Who wants another car payment each month when these fully paid off cars will have an extended excitement factor for another few years!
Thanks you Speedriven for introducing serious competition to Weistec and to some degree Kleemann although I think their new Eaton blowers are not as efficient or powerful. Renntech lysholm/IHI SC kits are way overpriced and too small to generate any meaningful power. Brabus is not known for SC kits so not much of a challenge to this market.
Who wants another car payment each month when these fully paid off cars will have an extended excitement factor for another few years!
Thanks you Speedriven for introducing serious competition to Weistec and to some degree Kleemann although I think their new Eaton blowers are not as efficient or powerful. Renntech lysholm/IHI SC kits are way overpriced and too small to generate any meaningful power. Brabus is not known for SC kits so not much of a challenge to this market.
Last edited by AMGSC; 07-26-2013 at 01:40 PM.
#348
MBWorld Fanatic!
Join Date: Aug 2006
Location: A.D., U.A.E
Posts: 7,024
Likes: 0
Received 383 Likes
on
348 Posts
00 C200 & 00 C55 & 06 SLK55
COMPETITION! That's the American way. The market will be grateful that finally these older cars will be able to keep up with the newer models!
Who wants another car payment each month when these fully paid off cars will have an extended excitement factor for another few years!
Thanks you Speedriven for introducing serious competition to Weistec and to some degree Kleemann although I think their new Eaton blowers are not as efficient or powerful. Renntech lysholm/IHI SC kits are way overpriced and too small to generate any meaningful power. Brabus is not known for SC kits so not much of a challenge to this market.
Who wants another car payment each month when these fully paid off cars will have an extended excitement factor for another few years!
Thanks you Speedriven for introducing serious competition to Weistec and to some degree Kleemann although I think their new Eaton blowers are not as efficient or powerful. Renntech lysholm/IHI SC kits are way overpriced and too small to generate any meaningful power. Brabus is not known for SC kits so not much of a challenge to this market.
fully agreed with you,,
Thankss for sharing....
ZAYED,,
#349
MBWorld Fanatic!
#350
Banned
Thread Starter