....Speedriven's Whipple Supercharger Upgrade....
#76
MBWorld Fanatic!
#80
Super Member
We have two members in the 400's... and several members pulling high 11's, 170 in the standing mile, and one runs high 10's with a 100-shot.
#82
MBWorld Fanatic!
Join Date: Feb 2011
Location: miami / delray beach
Posts: 2,841
Received 202 Likes
on
155 Posts
2014 E63s amg 4matic, 2009 C63, 2006 E55 AMG , 2001.5 AUDI S4 stg 3+ w/meth
at $6K this would be a sweet deal! if it gets done...
will the kit come with larger injectors as i assume stg 1,2,and 3 will all be over 500whp ?
will the kit come with larger injectors as i assume stg 1,2,and 3 will all be over 500whp ?
#83
MBWorld Fanatic!
#84
Banned
Thread Starter
Some updates and details.
Supercharger plate is almost complete.
As seen in the next picture, we plan to use the stock throttle body inlet in the kit. The stock intercooler and y-pipe you see pictured is only for fitment purposes. We will be building our own intercooler setup along with our our y-pipe. The design will incorporate the bypass valve as well.
In regards to the throttle body inlet, it will require modification to fit. So after some deliberation we have come up with a few options.
First, you can buy the kit as is with the new throttle body inlet piece that has been modified and pay an extra fee for it.
Secondly, you will still buy the kit as a complete package with the modified throttle body, but when you remove your stock unit we will refund you a core charge that was applied to the kit.
Finally, if you already have an 80mm or 82mm TB you would like to use you may send it to us and we will modify it to work with the supercharger kit.
The supercharger will have new runners made and will not require the core of any other part on the car so far.
By the way, if anyone has an extra bypass valve laying around they want to let us borrow or buy let us know
Supercharger plate is almost complete.
As seen in the next picture, we plan to use the stock throttle body inlet in the kit. The stock intercooler and y-pipe you see pictured is only for fitment purposes. We will be building our own intercooler setup along with our our y-pipe. The design will incorporate the bypass valve as well.
In regards to the throttle body inlet, it will require modification to fit. So after some deliberation we have come up with a few options.
First, you can buy the kit as is with the new throttle body inlet piece that has been modified and pay an extra fee for it.
Secondly, you will still buy the kit as a complete package with the modified throttle body, but when you remove your stock unit we will refund you a core charge that was applied to the kit.
Finally, if you already have an 80mm or 82mm TB you would like to use you may send it to us and we will modify it to work with the supercharger kit.
The supercharger will have new runners made and will not require the core of any other part on the car so far.
By the way, if anyone has an extra bypass valve laying around they want to let us borrow or buy let us know
#87
Banned
Thread Starter
No promises yet on a time frame. But here is an idea of what it could be.
It takes 4 weeks to receive an assembled blower from Whipple (our current core is a hollow mockup for dimensions), and we have about 3 weeks left of R&D before it can get into a car. So plan around the 8 week mark to have a running car with it. After that we will put some heavy and hard miles on the kit to make sure it holds up, and then it should be all ready to go!
It takes 4 weeks to receive an assembled blower from Whipple (our current core is a hollow mockup for dimensions), and we have about 3 weeks left of R&D before it can get into a car. So plan around the 8 week mark to have a running car with it. After that we will put some heavy and hard miles on the kit to make sure it holds up, and then it should be all ready to go!
#88
MBWorld Fanatic!
No promises yet on a time frame. But here is an idea of what it could be.
It takes 4 weeks to receive an assembled blower from Whipple (our current core is a hollow mockup for dimensions), and we have about 3 weeks left of R&D before it can get into a car. So plan around the 8 week mark to have a running car with it. After that we will put some heavy and hard miles on the kit to make sure it holds up, and then it should be all ready to go!
It takes 4 weeks to receive an assembled blower from Whipple (our current core is a hollow mockup for dimensions), and we have about 3 weeks left of R&D before it can get into a car. So plan around the 8 week mark to have a running car with it. After that we will put some heavy and hard miles on the kit to make sure it holds up, and then it should be all ready to go!
If it takes 6 months so be it. Just produce a product that makes lots of POWAH! Heavy hard miles, I will envy the driver
#92
Super Member
Join Date: Oct 2009
Location: Saudi Arabia - Qatif
Posts: 661
Likes: 0
Received 3 Likes
on
3 Posts
Brabus K8 E55 05
So, The SC and Intercooler will be change, everything else is stock? nothing from old SC to be used? ex: SC pulley?
Don't you think that the Stock intake plenums is not good for the SC application? I think even for a modded E55 with stock SC is not that good and will restrict some of the air passing. I don't know but that's what I think when I look at it.
Don't you think that the Stock intake plenums is not good for the SC application? I think even for a modded E55 with stock SC is not that good and will restrict some of the air passing. I don't know but that's what I think when I look at it.
Last edited by ahmad0658; 05-24-2012 at 08:31 PM.
#94
Junior Member
Join Date: Nov 2010
Location: detroit, michigan
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
audi>mercedes-benz
After reading this thread I decided to design a exhuast system for the srt-6 guys! After countless hours developing it and testing flow specs in a computer program, I give you the pure power headers! The blue represents the intake portion of the engine and the red the exhaust.
Get off this thread with your problems!!!!
Get off this thread with your problems!!!!
#95
Member
Join Date: Mar 2011
Location: Orange County
Posts: 193
Likes: 0
Received 1 Like
on
1 Post
Viper SRT-10, CLS 55 AMG, 2012 Tacoma Off Road 4x4
My gut hurts after seeing the pics of the whipple on top of a 55 engine!! Such a wonderful thing!! I'm really hoping the blower wine is extremely loud, hell I'd pay the 6k just for that alone. Anyone want to buy my stock blower?? lol!!
#98
PLATINUM SPONSOR
Some updates and details.
Supercharger plate is almost complete.
As seen in the next picture, we plan to use the stock throttle body inlet in the kit. The stock intercooler and y-pipe you see pictured is only for fitment purposes. We will be building our own intercooler setup along with our our y-pipe. The design will incorporate the bypass valve as well.
In regards to the throttle body inlet, it will require modification to fit. So after some deliberation we have come up with a few options.
First, you can buy the kit as is with the new throttle body inlet piece that has been modified and pay an extra fee for it.
Secondly, you will still buy the kit as a complete package with the modified throttle body, but when you remove your stock unit we will refund you a core charge that was applied to the kit.
Finally, if you already have an 80mm or 82mm TB you would like to use you may send it to us and we will modify it to work with the supercharger kit.
The supercharger will have new runners made and will not require the core of any other part on the car so far.
By the way, if anyone has an extra bypass valve laying around they want to let us borrow or buy let us know
Supercharger plate is almost complete.
As seen in the next picture, we plan to use the stock throttle body inlet in the kit. The stock intercooler and y-pipe you see pictured is only for fitment purposes. We will be building our own intercooler setup along with our our y-pipe. The design will incorporate the bypass valve as well.
In regards to the throttle body inlet, it will require modification to fit. So after some deliberation we have come up with a few options.
First, you can buy the kit as is with the new throttle body inlet piece that has been modified and pay an extra fee for it.
Secondly, you will still buy the kit as a complete package with the modified throttle body, but when you remove your stock unit we will refund you a core charge that was applied to the kit.
Finally, if you already have an 80mm or 82mm TB you would like to use you may send it to us and we will modify it to work with the supercharger kit.
The supercharger will have new runners made and will not require the core of any other part on the car so far.
By the way, if anyone has an extra bypass valve laying around they want to let us borrow or buy let us know
__________________
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
#99
MBWorld Fanatic!
Join Date: Feb 2004
Location: Southern, CA.
Posts: 9,155
Likes: 0
Received 18 Likes
on
17 Posts
V12-Biturbo
NOT to de-flate your Sig-Dyno-boner but....
Sal's SL55k made a TRUE 600+ rwhp on 100 octane tune years ago w/OE Tuning, & your TQ # is purely a TQ SPIKE IE NOT real, it blipped that # for a couple rpm's then went far South. lastly other less modded E55's have run 180+ mph in standing mile so what's ALL this "World Record" Crud
#100
Wow...
You email a disgruntiled customer privately. Never ever publicly bash a customer. EVER! I don't care it you are Kleeman and the customer is completely wrong.
Speedriven, you are out of line.
That being said, I am looking forward to this new supercharger and numbers.
You email a disgruntiled customer privately. Never ever publicly bash a customer. EVER! I don't care it you are Kleeman and the customer is completely wrong.
Speedriven, you are out of line.
That being said, I am looking forward to this new supercharger and numbers.
So a Company can get bashed but customers cannot??
What's good for one is good for the other....customers are not saints or gods that are free from criticism.
If you've ever run a business you know there are plenty of crappy or annoying customers (or potential or ex-customers) out there, just as many as there are crappy companies. No one is forcing anyone to buy from them, or sell to them.
Maybe that first guys response seemed a bit harsh to some, but I applaud any company or employee that has the courage to publicly stand their ground and defend their side in the same medium and tone as the customer. Most companies are too scared of backlash to have a backbone and just let things go un-answered, and I've seen many keyboard warriors with anonymity-fueled courage go wild on forums over small issues, usually without representing the entire story.
Maybe that is not the situation here, maybe it is, Im not making a statement about anyone in this thread, but I don't think companies should have to bite their tongue.
Sorry to add to the thread-hijack. Please continue with supercharger awesomeness