The e55amgrocket/injector discussion and smack-down
#1
MBWorld Fanatic!
Thread Starter
The e55amgrocket/injector discussion and smack-down
Ask someone that had their motor blown by another tuner. All I can tell you is that OE didn't do anything and put the blame everywhere but on themselves. And this was on a car that broke all 8 piston ring lands on literally the first pull post tune. Eurocharged offered parts for a motor OE blew
Every time there's something on RTR , you have to bring up OE, they are not related so why bring it up?
#2
MBWorld Fanatic!
Hey Steve (E55amgKokhead) your a real POS. You sold me injectors with connectors that barely fit under the fuel rail and not enough room to attach the connectors from the fuel system. I asked you to cover the cost for the correct connectors and you gave me the runaround. The guy actually has the ***** to tell me he can get me the correct connectors for $8 a piece ($64 out of my pocket) or he can send me $20!!! All I wanted was for you to make it right and you basically told me to GFM.
Your a liar and a thief. I worked hard for my money, whether its a dollar or a thousand makes no difference to me. You stole from me. My money is sitting in your pocket. SMF!! In my view you dont deserve an ounce of respect and karma is a real fkn *****.
The poor guy I sold them to drove for 2 hours to have them installed. Made me look like a real fkn a55hole. Luckily we had a hookup for the correct connectors at a cost of $107 that I split with the buyer. FU Steve you selfish MFker. FKN A right Im heated!!!
Your a liar and a thief. I worked hard for my money, whether its a dollar or a thousand makes no difference to me. You stole from me. My money is sitting in your pocket. SMF!! In my view you dont deserve an ounce of respect and karma is a real fkn *****.
The poor guy I sold them to drove for 2 hours to have them installed. Made me look like a real fkn a55hole. Luckily we had a hookup for the correct connectors at a cost of $107 that I split with the buyer. FU Steve you selfish MFker. FKN A right Im heated!!!
#4
MBWorld Fanatic!
Thread Starter
Hey Steve (E55amgKokhead) your a real POS. You sold me injectors with connectors that barely fit under the fuel rail and not enough room to attach the connectors from the fuel system. I asked you to cover the cost for the correct connectors and you gave me the runaround. The guy actually has the ***** to tell me he can get me the correct connectors for $8 a piece ($64 out of my pocket) or he can send me $20!!! All I wanted was for you to make it right and you basically told me to GFM.
Your a liar and a thief. I worked hard for my money, whether its a dollar or a thousand makes no difference to me. You stole from me. My money is sitting in your pocket. SMF!! In my view you dont deserve an ounce of respect and karma is a real fkn *****.
The poor guy I sold them to drove for 2 hours to have them installed. Made me look like a real fkn a55hole. Luckily we had a hookup for the correct connectors at a cost of $107 that I split with the buyer. FU Steve you selfish MFker. FKN A right Im heated!!!
Your a liar and a thief. I worked hard for my money, whether its a dollar or a thousand makes no difference to me. You stole from me. My money is sitting in your pocket. SMF!! In my view you dont deserve an ounce of respect and karma is a real fkn *****.
The poor guy I sold them to drove for 2 hours to have them installed. Made me look like a real fkn a55hole. Luckily we had a hookup for the correct connectors at a cost of $107 that I split with the buyer. FU Steve you selfish MFker. FKN A right Im heated!!!
I was there and witnessed this!
#5
Hey Steve (E55amgKokhead) your a real POS. You sold me injectors with connectors that barely fit under the fuel rail and not enough room to attach the connectors from the fuel system. I asked you to cover the cost for the correct connectors and you gave me the runaround. The guy actually has the ***** to tell me he can get me the correct connectors for $8 a piece ($64 out of my pocket) or he can send me $20!!! All I wanted was for you to make it right and you basically told me to GFM.
Your a liar and a thief. I worked hard for my money, whether its a dollar or a thousand makes no difference to me. You stole from me. My money is sitting in your pocket. SMF!! In my view you dont deserve an ounce of respect and karma is a real fkn *****.
The poor guy I sold them to drove for 2 hours to have them installed. Made me look like a real fkn a55hole. Luckily we had a hookup for the correct connectors at a cost of $107 that I split with the buyer. FU Steve you selfish MFker. FKN A right Im heated!!!
Your a liar and a thief. I worked hard for my money, whether its a dollar or a thousand makes no difference to me. You stole from me. My money is sitting in your pocket. SMF!! In my view you dont deserve an ounce of respect and karma is a real fkn *****.
The poor guy I sold them to drove for 2 hours to have them installed. Made me look like a real fkn a55hole. Luckily we had a hookup for the correct connectors at a cost of $107 that I split with the buyer. FU Steve you selfish MFker. FKN A right Im heated!!!
#7
PLATINUM SPONSOR
Hey Steve (E55amgKokhead) your a real POS. You sold me injectors with connectors that barely fit under the fuel rail and not enough room to attach the connectors from the fuel system. I asked you to cover the cost for the correct connectors and you gave me the runaround. The guy actually has the ***** to tell me he can get me the correct connectors for $8 a piece ($64 out of my pocket) or he can send me $20!!! All I wanted was for you to make it right and you basically told me to GFM.
Your a liar and a thief. I worked hard for my money, whether its a dollar or a thousand makes no difference to me. You stole from me. My money is sitting in your pocket. SMF!! In my view you dont deserve an ounce of respect and karma is a real fkn *****.
The poor guy I sold them to drove for 2 hours to have them installed. Made me look like a real fkn a55hole. Luckily we had a hookup for the correct connectors at a cost of $107 that I split with the buyer. FU Steve you selfish MFker. FKN A right Im heated!!!
Your a liar and a thief. I worked hard for my money, whether its a dollar or a thousand makes no difference to me. You stole from me. My money is sitting in your pocket. SMF!! In my view you dont deserve an ounce of respect and karma is a real fkn *****.
The poor guy I sold them to drove for 2 hours to have them installed. Made me look like a real fkn a55hole. Luckily we had a hookup for the correct connectors at a cost of $107 that I split with the buyer. FU Steve you selfish MFker. FKN A right Im heated!!!
Here are some of the rules we agree too but the slander and personal attacks on me , family and friends is allowed.. Looks like at least #1, part of #2,#3, #4, #5
Without limiting the foregoing, the following behaviors are strictly prohibited:
Strong, vulgar, obscene or otherwise harmful language,
Racially, ethnically or otherwise, objectionable language,
Harassing, intimidating, stalking or threatening other community members,
Libelous, defamatory or otherwise tortious language,
Online vandalism,
Impersonation of another person,
Posting, distributing, transmitting or promoting illegal content,
Invasion of another's privacy,
Actions that are hurtful to minors,
__________________
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
Trending Topics
#8
MBWorld Fanatic!
Exactly novae. I would have given you a refund or payed for the correct connectors. The guy that bought them lives 2 hours away. The mechanic takes everything off and we find that it wont work. Now I look like a dikhead. We made a call to Ragetek and got lucky, he had the correct connectors. Otherwise I would have had to pay for the hands. Im not a scumbag. I would have payed for Steves mistake.
Steve, nah dont even bother calling him, he'll change the subject and start bad mouthing TTM. How his injectors are exactly the same.. THEY ARE NOT THE SAME INJECTORS!
Steve, nah dont even bother calling him, he'll change the subject and start bad mouthing TTM. How his injectors are exactly the same.. THEY ARE NOT THE SAME INJECTORS!
#9
MBWorld Fanatic!
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
Hey Steve (E55amgKokhead) your a real POS. You sold me injectors with connectors that barely fit under the fuel rail and not enough room to attach the connectors from the fuel system. I asked you to cover the cost for the correct connectors and you gave me the runaround. The guy actually has the ***** to tell me he can get me the correct connectors for $8 a piece ($64 out of my pocket) or he can send me $20!!! All I wanted was for you to make it right and you basically told me to GFM.
Your a liar and a thief. I worked hard for my money, whether its a dollar or a thousand makes no difference to me. You stole from me. My money is sitting in your pocket. SMF!! In my view you dont deserve an ounce of respect and karma is a real fkn *****.
The poor guy I sold them to drove for 2 hours to have them installed. Made me look like a real fkn a55hole. Luckily we had a hookup for the correct connectors at a cost of $107 that I split with the buyer. FU Steve you selfish MFker. FKN A right Im heated!!!
Your a liar and a thief. I worked hard for my money, whether its a dollar or a thousand makes no difference to me. You stole from me. My money is sitting in your pocket. SMF!! In my view you dont deserve an ounce of respect and karma is a real fkn *****.
The poor guy I sold them to drove for 2 hours to have them installed. Made me look like a real fkn a55hole. Luckily we had a hookup for the correct connectors at a cost of $107 that I split with the buyer. FU Steve you selfish MFker. FKN A right Im heated!!!
#10
MBWorld Fanatic!
Thread Starter
The guy who did the install of the injectors is very qualified, he installed my TTM injectors and looped fuel rail and did kustoms as well and he immediately said it wouldn't work, thankfully we knew someone that had other pigtails or else that guy would have had to drive back 2 hours without anything
BTW, they are NOT the same injectors as TTM, even the wrench said it since he saw both!
BTW, they are NOT the same injectors as TTM, even the wrench said it since he saw both!
#11
MBWorld Fanatic!
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
Tell you what. I'll install a set on your car just to show you they do fit. Sorry he couldn't figure it out. FYI the injectors don't have to be all in a straight line like he had them in the picture.
#13
MBWorld Fanatic!
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
The guy who did the install of the injectors is very qualified, he installed my TTM injectors and looped fuel rail and did kustoms as well and he immediately said it wouldn't work, thankfully we knew someone that had other pigtails or else that guy would have had to drive back 2 hours without anything
BTW, they are NOT the same injectors as TTM, even the wrench said it since he saw both!
BTW, they are NOT the same injectors as TTM, even the wrench said it since he saw both!
#14
MBWorld Fanatic!
Yea they do fit and I sent you pictures proving it. I can't help that you paid way too much for something you didnt even need. I told you send the old connectors back and I'll refund you the $21 I pay for them if you were that unhappy. Maybe next time you should ask before buying something and expecting someone else to pay for it. Funny I've installed them several times as well as other people yet you couldn't figure out how to put them on.
Thats the kind of guy I am. I stand behind what I represent. You, your a *****.
#15
MBWorld Fanatic!
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
What Steve AMGrocket is selling injectors and is not a sponsor? He ripped you off? Well that is not the first post about him.. He even posted he has to hide money from his wife and baby kids to fuel his addiction. Search his post it is all there and all the selling of parts , just to rip this site off of a few hundred buck a month in fees
Here are some of the rules we agree too but the slander and personal attacks on me , family and friends is allowed.. Looks like at least #1, part of #2,#3, #4, #5
Without limiting the foregoing, the following behaviors are strictly prohibited:
Strong, vulgar, obscene or otherwise harmful language,
Racially, ethnically or otherwise, objectionable language,
Harassing, intimidating, stalking or threatening other community members,
Libelous, defamatory or otherwise tortious language,
Online vandalism,
Impersonation of another person,
Posting, distributing, transmitting or promoting illegal content,
Invasion of another's privacy,
Actions that are hurtful to minors,
#16
PLATINUM SPONSOR
Yes, and if you don`t have the right connectors, those cheap little black adapters will snap off on you ! then you could go lean on tha cylinder and blow the hell out of your motor!!!!
__________________
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
#17
MBWorld Fanatic!
Thread Starter
Amgrocket, the guy who installed them has built numerous 1000hp cars and has more knowledge than many on here, and you say he's lazy? He's done some crazy custom work that I have witnessed but was lazy on your injectors? Ya right, btw your injectors have a different spray pattern how are they the same as TTM? MIGHT be the same volume but a totally different spray pattern
You totally screwed kustom, make good, but it seems like you love to dish it but can't take it, I would lose money to keep my word and integrity but that's just me because I'm a man and own up
You totally screwed kustom, make good, but it seems like you love to dish it but can't take it, I would lose money to keep my word and integrity but that's just me because I'm a man and own up
#19
MBWorld Fanatic!
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
Amgrocket, the guy who installed them has built numerous 1000hp cars and has more knowledge than many on here, and you say he's lazy? He's done some crazy custom work that I have witnessed but was lazy on your injectors? Ya right, btw your injectors have a different spray pattern how are they the same as TTM? MIGHT be the same volume but a totally different spray pattern
You totally screwed kustom, make good, but it seems like you love to dish it but can't take it, I would lose money to keep my word and integrity but that's just me because I'm a man and own up
You totally screwed kustom, make good, but it seems like you love to dish it but can't take it, I would lose money to keep my word and integrity but that's just me because I'm a man and own up
And whoever told you it's different must not know. If your going off of what Craig said awhile back he was just going by what he was told by Bruce. Ive seen both injectors on a test bench. Do you really think Bosch made
Injectors just for TTM? Point is the connectors do work and your tech was wrong. If they don't work how am I running the exact same ones? Because they do and he didn't take the time to figure it out. I offered him a refund but that wasn't good enough. If he had a problem he should of sent me a PM and asked for help. There is no ripping someone off. I sold the injectors/adapters at cost to pay for my rebuild and not even on this site.
#20
MBWorld Fanatic!
Thread Starter
Kustom pmed you and spoke to you on the phone, are you kidding me??
Funny, I was able to reach Bruce at whatever time, he actually called me 2-3 times to make sure I was happy with my injectors, bro man up, those connectors suck *** and if you want to blame techs, that is a major cop out, like I said obviously you are willing to sell your word as a man for less than 100$, time to grow up
Btw regarding the injectors they are different
Funny, I was able to reach Bruce at whatever time, he actually called me 2-3 times to make sure I was happy with my injectors, bro man up, those connectors suck *** and if you want to blame techs, that is a major cop out, like I said obviously you are willing to sell your word as a man for less than 100$, time to grow up
Btw regarding the injectors they are different
#21
MBWorld Fanatic!
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
Kustom pmed you and spoke to you on the phone, are you kidding me??
Funny, I was able to reach Bruce at whatever time, he actually called me 2-3 times to make sure I was happy with my injectors, bro man up, those connectors suck *** and if you want to blame techs, that is a major cop out, like I said obviously you are willing to sell your word as a man for less than 100$, time to grow up
Btw regarding the injectors they are different
Funny, I was able to reach Bruce at whatever time, he actually called me 2-3 times to make sure I was happy with my injectors, bro man up, those connectors suck *** and if you want to blame techs, that is a major cop out, like I said obviously you are willing to sell your word as a man for less than 100$, time to grow up
Btw regarding the injectors they are different
#22
MBWorld Fanatic!
Thread Starter
Yea he spoke to me after the fact. When he called back I answered. I'm not running from anything. I'm sure Bruce was eager to help too I mean I'd I was getting paid that much for the same product I would too. What your not understanding is they do fit but someone decided they wanted different connectors so that's not my fault. I offered to refund him but that wasn't good enough. Just because a tech built a 1000hp car means nothing. I've owned 1200+hp cars so what that's irrelevant. All he had to do was ask me how to make them work and he would of been able to use them.
Get real man, you lost your integrity for 100$ at this point I don't think it's about the money it's the principle
#23
MBWorld Fanatic!
I had both injectors in my hands, they are not the same. You want to be 100% sure break out your purse Steve and buy a set of TTM and compare them to what you sell.
Steve you got no respect. I spoke to Steve on the phone and he doesn't want to take an ounce of responsibility. "Make them fit" his words. Yea Steve I'll make it fit, don't sweat it. You know what you can do with your $20 refund offer.
Like I explained to you the parts were taken off the motor with the intent of installing injectors. When we found that there was a problem with the connectors we made a few phone calls and happened to get lucky. I also explained the gentleman drove 2 fkn hours to have injectors installed and I wasnt going to leave him hanging because you sold me parts that need to be MADE to fit.
Steve you got no respect. I spoke to Steve on the phone and he doesn't want to take an ounce of responsibility. "Make them fit" his words. Yea Steve I'll make it fit, don't sweat it. You know what you can do with your $20 refund offer.
Like I explained to you the parts were taken off the motor with the intent of installing injectors. When we found that there was a problem with the connectors we made a few phone calls and happened to get lucky. I also explained the gentleman drove 2 fkn hours to have injectors installed and I wasnt going to leave him hanging because you sold me parts that need to be MADE to fit.
#24
MBWorld Fanatic!
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
Yea I "really" saw his injectors. Fabtech had a set he bought from Craig and sold on the other forum and also knows they are the same but believe what you want to. You think $50 is going to kill me? No but your exactly right it's about the principal. I offered a refund of what I sent him. I wouldn't buy something and call someone and say hey man I bought these adapters cuz we couldn't get yours to fit so you need to pay me for them. I mean damn I wouldn't even do something like that to Brooke.
#25
MBWorld Fanatic!
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
I had both injectors in my hands, they are not the same. You want to be 100% sure break out your purse Steve and buy a set of TTM and compare them to what you sell.
Steve you got no respect. I spoke to Steve on the phone and he doesn't want to take an ounce of responsibility. "Make them fit" his words. Yea Steve I'll make it fit, don't sweat it. You know what you can do with your $20 refund offer.
Like I explained to you the parts were taken off the motor with the intent of installing injectors. When we found that there was a problem with the connectors we made a few phone calls and happened to get lucky. I also explained the gentleman drove 2 fkn hours to have injectors installed and I wasnt going to leave him hanging because you sold me parts that need to be MADE to fit.
Steve you got no respect. I spoke to Steve on the phone and he doesn't want to take an ounce of responsibility. "Make them fit" his words. Yea Steve I'll make it fit, don't sweat it. You know what you can do with your $20 refund offer.
Like I explained to you the parts were taken off the motor with the intent of installing injectors. When we found that there was a problem with the connectors we made a few phone calls and happened to get lucky. I also explained the gentleman drove 2 fkn hours to have injectors installed and I wasnt going to leave him hanging because you sold me parts that need to be MADE to fit.