Transmission jerky when stopping
#1
Newbie
Thread Starter
Join Date: Jun 2012
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
E63 AMG W211
Transmission jerky when stopping
Hi
Not sure if it was discussed before. I just got 2007 E63 with 36K miles. After first week of driving I noticed that when I am breaking for red light or whatever, and gears are downshifting I really feel like I pressed breaks too hard. It happens when downshifts from 5th to 4th gear and also from 4th to 3rd. Not sure whats the reason. First I felt it only when transmission was downshifting from 4th to 3rd, but after 6 hours trip (mostly high speeds) it started doing the same with 5th to 4th gear. Not sure if it's memory.. or fluid or something.....
It happens in C or S mode
Thanx
Not sure if it was discussed before. I just got 2007 E63 with 36K miles. After first week of driving I noticed that when I am breaking for red light or whatever, and gears are downshifting I really feel like I pressed breaks too hard. It happens when downshifts from 5th to 4th gear and also from 4th to 3rd. Not sure whats the reason. First I felt it only when transmission was downshifting from 4th to 3rd, but after 6 hours trip (mostly high speeds) it started doing the same with 5th to 4th gear. Not sure if it's memory.. or fluid or something.....
It happens in C or S mode
Thanx
#4
Senior Member
I've experienced this multiple times usually only in 2nd gear tho when coming to a stop. The transmission seems to be fighting with slack or someone like that. Typically only happens in manual mode. By the way, sneaky ecu reset doesn't seem to have many reports of working in our E63 W211 cars (2007-2009), mainly just the E55s. I never had any success anyways...but I wish I did!!
#6
Newbie
Thread Starter
Join Date: Jun 2012
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
E63 AMG W211
I've experienced this multiple times usually only in 2nd gear tho when coming to a stop. The transmission seems to be fighting with slack or someone like that. Typically only happens in manual mode. By the way, sneaky ecu reset doesn't seem to have many reports of working in our E63 W211 cars (2007-2009), mainly just the E55s. I never had any success anyways...but I wish I did!!
Trending Topics
#9
Senior Member
Nah, it never bothered me enough to go through the hassle of asking a dealership to take my baby for a few days to replicate. Plus I'm on extended warranty now, so if it aint broke...they aint fixing it.
#10
Newbie
Thread Starter
Join Date: Jun 2012
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
E63 AMG W211
Just got my car fro service. They updated software and changed transmission fluid and it fixed the problem. Now there is another problem, after driving for about 20 miles I got Check Engine light. Don't know what to do.... Any ideas?
#13
Senior Member
Personally I'd know what the code is before taking it back. Never know what you might be in for and it'd be wise to have an idea of the issue in case it is related and they try to say its not.
#16
Newbie
Thread Starter
Join Date: Jun 2012
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
E63 AMG W211
I'll try to het those codes tomorrow. Will drop @ MB service since I still have warranty. So pissed.... Also after driving for a little bit noticed loss of power, it drives like toyota now...
#18
Super Member
I know this thread is really old, but perhaps someone still follows it...
I have a little jerky transmission too when going from 2 to 3 when cold. I took it in for service and requested tranny software update. They advised agains it and said that they've seen 3 customer who updated tranny software in their W211 E63 and it made it worst. They recommended replacing the valve body with the updated 3rd generation (or smth like that) if it gets really bad.
I have a little jerky transmission too when going from 2 to 3 when cold. I took it in for service and requested tranny software update. They advised agains it and said that they've seen 3 customer who updated tranny software in their W211 E63 and it made it worst. They recommended replacing the valve body with the updated 3rd generation (or smth like that) if it gets really bad.
#19
MBWorld Fanatic!
I know this thread is really old, but perhaps someone still follows it...
I have a little jerky transmission too when going from 2 to 3 when cold. I took it in for service and requested tranny software update. They advised agains it and said that they've seen 3 customer who updated tranny software in their W211 E63 and it made it worst. They recommended replacing the valve body with the updated 3rd generation (or smth like that) if it gets really bad.
I have a little jerky transmission too when going from 2 to 3 when cold. I took it in for service and requested tranny software update. They advised agains it and said that they've seen 3 customer who updated tranny software in their W211 E63 and it made it worst. They recommended replacing the valve body with the updated 3rd generation (or smth like that) if it gets really bad.
#20
Super Member
#21
MBWorld Fanatic!
My mounts need to be replaced. They aren't horrible, but it is time to replace them. The tranny was serviced in may of 2015 when the car had 39K miles. Currently it has 47K, so no service is due. The shop that I mentioned reset all adaptations today, and warned me that it might act weird while it is learning. It is been worse today, but hope it will adapt to my driving style and then become smooth (at least as smooth as it was before resetting.) I actually have my own thread here: https://mbworld.org/forums/w211-amg/...nsmission.html
#22
Super Member
Thanks, will do. The mounts themselves are $130 for each OEM and $140 for a pair of Corteco. But the quote I got from 5 Mercedes shops here in MA was $1000. I am not a DIY-er who can replace mounts, so will try to find someone qualified who can replace them for cheaper. If can't find, will have to pay 1000 and get them replaced
#23
MBWorld Fanatic!
Thanks, will do. The mounts themselves are $130 for each OEM and $140 for a pair of Corteco. But the quote I got from 5 Mercedes shops here in MA was $1000. I am not a DIY-er who can replace mounts, so will try to find someone qualified who can replace them for cheaper. If can't find, will have to pay 1000 and get them replaced
#24
Super Member