Drag racers what's your mods
#1
MBWorld Fanatic!
Thread Starter
Drag racers what's your mods
I was wondering what all the drag racers were running. We are all after the same thing. To run as fast as we can.
Lets compair mods and times and maybe we can come up with the ultimate set up. Who knows, some records may get shattered. I'm going for it all down here in the heat. My car should be much faster in some cold weather.
My best time is 11.03 @ 126 w/ 1.60 60ft on Hoosiers.
I'll start.
MOD LIST:
Eurocharged HE w/ Meziere pump
Eurocharged Long Tube headers
Eurocharged 82 TB
Eurocharged 550 injectors
Eurocharged 185 pulley
Eurocharged TCU tune
Eurocharged custom dyno tune by Jerry
Carbino carbon fiber air box
Carbino python tubes
TTM intake scoops
K&N air filters
Quaife LSD
3.5gal trunk tank w/ Rule2000 pump
1.5gal AEM water/meth injection
Cobra HE mounted under trunk
3 inch exhaust pipes w/ Magnaflow X pipe and no mufflers
Braille light wieght battery
Now, what do you have and what's your best time?
Lets compair mods and times and maybe we can come up with the ultimate set up. Who knows, some records may get shattered. I'm going for it all down here in the heat. My car should be much faster in some cold weather.
My best time is 11.03 @ 126 w/ 1.60 60ft on Hoosiers.
I'll start.
MOD LIST:
Eurocharged HE w/ Meziere pump
Eurocharged Long Tube headers
Eurocharged 82 TB
Eurocharged 550 injectors
Eurocharged 185 pulley
Eurocharged TCU tune
Eurocharged custom dyno tune by Jerry
Carbino carbon fiber air box
Carbino python tubes
TTM intake scoops
K&N air filters
Quaife LSD
3.5gal trunk tank w/ Rule2000 pump
1.5gal AEM water/meth injection
Cobra HE mounted under trunk
3 inch exhaust pipes w/ Magnaflow X pipe and no mufflers
Braille light wieght battery
Now, what do you have and what's your best time?
#3
MBWorld Fanatic!
#4
Super Member
Join Date: Feb 2010
Location: Glendale, AZ
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
07 E63. 07 STi limited #606/800
#5
MBWorld Fanatic!
#6
Former Vendor of MBWorld
-STOCK T/B CLUB STILL!!
-FTP H/E Johnson CM30
-FTP Looped Rail and Injectors
-180 mm pulley (Stock S/C pulley)
-L/T Headers x Pipe res delete, to stock mufflers
-EC Tune NO TCU
-Full Weight with a 200 LB custom System in the trunk!!
11.30 119 mph (HEATSOAKED) 100+ degree day
Updated Mods now installed since PB Run:
-FTP Trunk tank
-Quaife LSD
-90 MM T/B Coming soon
-FTP H/E Johnson CM30
-FTP Looped Rail and Injectors
-180 mm pulley (Stock S/C pulley)
-L/T Headers x Pipe res delete, to stock mufflers
-EC Tune NO TCU
-Full Weight with a 200 LB custom System in the trunk!!
11.30 119 mph (HEATSOAKED) 100+ degree day
Updated Mods now installed since PB Run:
-FTP Trunk tank
-Quaife LSD
-90 MM T/B Coming soon
Last edited by FT-Performance; 07-11-2012 at 01:06 AM.
#7
MBWorld Fanatic!
Join Date: Apr 2009
Location: Lafayette, IN
Posts: 1,582
Likes: 0
Received 1 Like
on
1 Post
2008 ML63 2009 SL63 2010 Alpha 7 GTR
I'll play...
185 ASP pulley
Kleeman headers, no cats straight pipes into stock mufflers
KN filters
TTM fuel rail
Injectors
EC HE with mez pump
Split cooling
DADs rear mount tank
Rule 2000 tank pump
EC Tune
16' CLK wheels with MT ET streets
82mm MB TB
Times this fall
185 ASP pulley
Kleeman headers, no cats straight pipes into stock mufflers
KN filters
TTM fuel rail
Injectors
EC HE with mez pump
Split cooling
DADs rear mount tank
Rule 2000 tank pump
EC Tune
16' CLK wheels with MT ET streets
82mm MB TB
Times this fall
Trending Topics
#8
MBWorld Fanatic!
Time
1/4 Mile ET:11.013
1/4 Mile MPH:129.750
1/8 Mile ET:7.093
1/8 Mile MPH:97.470
0-60 Foot ET:1.589
Density Altitude (DA):1256 feet
Mods were:
C16 tune
180mm
82MM T/B
BIP Heat Exchanger w/ Mez pump
TTM Fuel Rail kit
Floored Fab Longtubes
BIP offroad x pipe
BIP trunk tank w/ Mez Pump
Magnapack mufflers
CCW Skinnys
CLK Steelies with Hoosiers
Wavetrac LSD
1/4 Mile ET:11.013
1/4 Mile MPH:129.750
1/8 Mile ET:7.093
1/8 Mile MPH:97.470
0-60 Foot ET:1.589
Density Altitude (DA):1256 feet
Mods were:
C16 tune
180mm
82MM T/B
BIP Heat Exchanger w/ Mez pump
TTM Fuel Rail kit
Floored Fab Longtubes
BIP offroad x pipe
BIP trunk tank w/ Mez Pump
Magnapack mufflers
CCW Skinnys
CLK Steelies with Hoosiers
Wavetrac LSD
Last edited by chawkins2001; 07-14-2012 at 03:09 PM.
#11
MBWorld Fanatic!
Go fast parts can be create, but the tuning has turned me off on this flat form. I'm content where I'm at because I'm tired of shopping for tuners. Good luck chasing.
#12
MBWorld Fanatic!
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
ok i'll play
4380lbs
60ft=1.521
1/8=6.759
103.100mph
1/4= 10.512
132.060mph
Density Altitude= 1800ft
0-60 2.5sec
0-100 6.2sec
60-130mph 6.90 confirmed on Ahmads Vbox
Mods=
DPF Ported Heads
PTE Cams
195mm Pulley
DPF trunk tank
DPF Heat exchanger
Quaife Diff
DPF 82mm TB
Eurocharged Mufflers
DPF Stainless steel 3'' full exhaust
Kleemann headers
CLK rear/CCW fronts
17lb Braile
550cc injectors
Q16 fuel
Tune by Jerry/Eurocharged
4380lbs
60ft=1.521
1/8=6.759
103.100mph
1/4= 10.512
132.060mph
Density Altitude= 1800ft
0-60 2.5sec
0-100 6.2sec
60-130mph 6.90 confirmed on Ahmads Vbox
Mods=
DPF Ported Heads
PTE Cams
195mm Pulley
DPF trunk tank
DPF Heat exchanger
Quaife Diff
DPF 82mm TB
Eurocharged Mufflers
DPF Stainless steel 3'' full exhaust
Kleemann headers
CLK rear/CCW fronts
17lb Braile
550cc injectors
Q16 fuel
Tune by Jerry/Eurocharged
#13
MBWorld Fanatic!
Ahmad, I was not there for the run, so I am not sure.
Steve, I am thinking if your mods were on a car that weighed what mine does, 3860lbs, it could have hit 9's. That is a 520lb difference, and it looks like 1/10 usually equates to 100lbs of lost weight.
One of my 11.0 runs, poor ZR1 tried to run me down but my lady would not have any part of it!
http://www.youtube.com/watch?feature=youtube_gdata_player&v=96DNQbnYuBE
Steve, I am thinking if your mods were on a car that weighed what mine does, 3860lbs, it could have hit 9's. That is a 520lb difference, and it looks like 1/10 usually equates to 100lbs of lost weight.
One of my 11.0 runs, poor ZR1 tried to run me down but my lady would not have any part of it!
http://www.youtube.com/watch?feature=youtube_gdata_player&v=96DNQbnYuBE
Last edited by chawkins2001; 07-11-2012 at 04:11 PM.
#14
MBWorld Fanatic!
Not chasing records...just trying to be competitive to most I come across
PB 11.8@119 with a 1.78 60 on ps2's at stock pressure
4400 pounds with me in it
Average DA and temps
Miracle International Raceway
Renntech 178 pulley
Cm 30
PLM heat exchanger with separate circuit and small res under hood
Heyvron shorty headers with stock cat back
Quaife LSD
K&N's
OE tuning dyno tune
I love being able to point at my car and say "runs 11's just like she sits now"
Lol.
PB 11.8@119 with a 1.78 60 on ps2's at stock pressure
4400 pounds with me in it
Average DA and temps
Miracle International Raceway
Renntech 178 pulley
Cm 30
PLM heat exchanger with separate circuit and small res under hood
Heyvron shorty headers with stock cat back
Quaife LSD
K&N's
OE tuning dyno tune
I love being able to point at my car and say "runs 11's just like she sits now"
Lol.
Last edited by Worth the wait; 07-11-2012 at 04:48 PM.
#15
MBWorld Fanatic!
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
Ahmad, I was not there for the run, so I am not sure.
Steve, I am thinking if your mods were on a car that weighed what mine does, 3860lbs, it could have hit 9's. That is a 520lb difference, and it looks like 1/10 usually equates to 100lbs of lost weight.
One of my 11.0 runs, poor ZR1 tried to run me down but my lady would not have any part of it!
http://www.youtube.com/watch?feature=youtube_gdata_player&v=96DNQbnYuBE
Steve, I am thinking if your mods were on a car that weighed what mine does, 3860lbs, it could have hit 9's. That is a 520lb difference, and it looks like 1/10 usually equates to 100lbs of lost weight.
One of my 11.0 runs, poor ZR1 tried to run me down but my lady would not have any part of it!
http://www.youtube.com/watch?feature=youtube_gdata_player&v=96DNQbnYuBE
#18
MBWorld Fanatic!
Thread Starter
#23
MBWorld Fanatic!
Thread Starter
#25
Senior Member
Join Date: May 2008
Location: Ft Lauderdale FL.
Posts: 406
Likes: 0
Received 1 Like
on
1 Post
05 crossfire w/SL55 drivetrain installed by Rudy Compart Intake/Needswings best et-10.76 @ 129
three heat exchangers,1.Needwings super cooler,And 1. each behind where the fog lights use to be.=3
Needswings cold air intake,
178 pulley
stock exhaust manifolds with cutouts
Tune, not on the dyno, I hate dyno's
Wavetrac posi unit
and of course the DRIVER (ME )
Needswings cold air intake,
178 pulley
stock exhaust manifolds with cutouts
Tune, not on the dyno, I hate dyno's
Wavetrac posi unit
and of course the DRIVER (ME )
Last edited by amx1397; 07-14-2012 at 06:14 PM.