KLEEMANN E55 headers back in stock!
07-30-2012, 08:42 PM
#51
MBWorld Fanatic!
Join Date: Jul 2012
Location: Orbiting the planet
Posts: 4,478
Received 1,489 Likes
on
986 Posts
This place is a joke.
Just ordered my Kleemann headers today...Scheduled to get a stock dyno run this week for some baseline numbers, and then again after the headers and tune. Will update when it's all done but will be about 3 weeks before I can install the headers. Car is all stock with the exception of a PLM heat exchanger, and just installed a fresh Bosch 010 factory pump.
09-12-2012, 11:03 AM
#53
Former Vendor of MBWorld
Thread Starter
Join Date: Jul 2002
Location: Colorado
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
Yes indeed- contact me via email or phone to order: cory@kleemannusa.com or 719.473.6441
09-15-2012, 03:36 PM
#54
Junior Member
Join Date: Aug 2012
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
E55AMG
Sensors
I just bought a 2004 E55.
We don't have emission restrictions here in South Africa so I took it to my local muffler shop to have the cats removed.
However when the car was on the lift we could see the previous owner cut the boxes open and removed the stuff inside. An adapter with some of that stuff inside is screwed in between the box and the last -lower- pickup - probably to fool the ecu in picking up a cat conv.
My problem is the engine light that continue to come on.
Is there anyway to get around this? Even if I replace the whole front piece together with new headers, how do one get around the light coming on.
I don't want the light completely eliminated because if something else does go wrong I need to know.
We don't have emission restrictions here in South Africa so I took it to my local muffler shop to have the cats removed.
However when the car was on the lift we could see the previous owner cut the boxes open and removed the stuff inside. An adapter with some of that stuff inside is screwed in between the box and the last -lower- pickup - probably to fool the ecu in picking up a cat conv.
My problem is the engine light that continue to come on.
Is there anyway to get around this? Even if I replace the whole front piece together with new headers, how do one get around the light coming on.
I don't want the light completely eliminated because if something else does go wrong I need to know.
09-15-2012, 07:25 PM
#55
MBWorld Fanatic!
Join Date: Oct 2006
Location: merryland
Posts: 1,603
Likes: 0
Received 0 Likes
on
0 Posts
cornfed gtr and m3
^^You will need a retune to take full advantage of these headers so just have your tuner turn off the cel (best bet is to get a Kleemann tune to go with them). Also, these headers are a performance bargain. You can't beat Cory or Kleemann!
11-20-2012, 07:12 AM
#56
Member
I was just reading your old post on wanting to only pay $2000 for headers installed and everyone said you were crazy. I guess the MB tax is going down finally.
Last edited by AMG903L; 11-20-2012 at 07:16 AM.
02-01-2016, 11:14 PM
#59
Super Member
02-03-2016, 05:58 PM
#62
Super Member
