Jerry's a beast, Eurocharged is where it's at, and gear swaps are doable!
#1
MBWorld Fanatic!
Thread Starter
Jerry's a beast, Eurocharged is where it's at, and gear swaps are doable!
I suppose I could just say read the title and leave me alone
That's not me. The car is shifting perfect at WOT with the 3.55's. In fact all of the car's shifts are great. No check engine lights. 3.55's may be more aggressive than a lot of you are ready for, I don't mean you can't handle it I mean it's hardly a "Mercedes" anymore
If you're going to run gears just not up and get some ET Streets for around town, or consider yourself driving a car with a 3 speed transmission. Jerry busted his *** getting this dialed in and working right, we're talking insane dedication! I'm going to be running at Shift S3ctor's Airstrip Attack 1/2 mile with a roll event tomorrow in Coalinga, I'll let you all know how everything goes.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#4
MBWorld Fanatic!
Thread Starter
Hopefully in a few weeks, till have to see if the 4th gear shift is worth the gains down the strip. Now on the street it's worth it!
It's pretty ridiculous, we'll have to meet up. Hopefully this weather will hold out.
#5
MBWorld Fanatic!
Join Date: Oct 2009
Location: Southern California
Posts: 2,825
Likes: 0
Received 16 Likes
on
11 Posts
E55 w/ goods, Z32 Project underway
Thinking the same on the extra shift. Curious how this turns out, but for street use, wow, LSD and some nice tires would be a must. Thanks for the update.
Last edited by pearlpower; 11-10-2012 at 07:15 PM.
Trending Topics
#8
MBWorld Fanatic!
I've been reading gear related stuff here for a while and how excited some of the members with "Fanatic" titles get.
I'm really really curious
Anyone patient enough to explain me what is happening and what you all are talking about and what those numbers mean 3.55 , 3.75 and all ?
Thanks in advance
I'm really really curious
Anyone patient enough to explain me what is happening and what you all are talking about and what those numbers mean 3.55 , 3.75 and all ?
Thanks in advance
#10
MBWorld Fanatic!
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
I've been wanting to do this for so long but didnt want to be the test rat. I can't wait to see how it does in the 1/4. My earlier thinking was that if I was able to cut 1.50's 60ft then I would stick with the stock rear gear ratio until I felt it was needed to change them.
#12
MBWorld Fanatic!
Thread Starter
I've been wanting to do this for so long but didnt want to be the test rat. I can't wait to see how it does in the 1/4. My earlier thinking was that if I was able to cut 1.50's 60ft then I would stick with the stock rear gear ratio until I felt it was needed to change them.
#13
MBWorld Fanatic!
I honestly dont see how it would hurt performance at all. That car must pull so hard mang
I would opt for 3.23 gear based on what suites my combo best. I am thinking that coupled with a 3000 stall would be viscious out the hole.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#16
Member
Join Date: Jun 2012
Location: S Florida
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
01 audi a4, 06 e55
I suppose I could just say read the title and leave me alone
That's not me. The car is shifting perfect at WOT with the 3.55's. In fact all of the car's shifts are great. No check engine lights. 3.55's may be more aggressive than a lot of you are ready for, I don't mean you can't handle it I mean it's hardly a "Mercedes" anymore
If you're going to run gears just not up and get some ET Streets for around town, or consider yourself driving a car with a 3 speed transmission. Jerry busted his *** getting this dialed in and working right, we're talking insane dedication! I'm going to be running at Shift S3ctor's Airstrip Attack 1/2 mile with a roll event tomorrow in Coalinga, I'll let you all know how everything goes.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#17
MBWorld Fanatic!
If the number is higher does it mean that a car can handle lots more horsepower because driveshaft shifts more times compared to before ?
#18
MBWorld Fanatic!
Join Date: Jun 2010
Location: Puerto Rico
Posts: 4,173
Likes: 0
Received 6 Likes
on
5 Posts
2005 E55 AMG
How's 2nd gear traction? My car has great 2nd gear traction with my Hankook R-S3's out back but I fear going this aggressive will make my 2nd gear just as useless as my first gear...lol.
Also, where do you get the gears from and how much does this cost?
Also, where do you get the gears from and how much does this cost?
#19
MBWorld Fanatic!
Basically, the higher the drive ratio, the more acceleration you'll gain, as well as a loss of top speed. So a stock E55 does what, 52 at 6200 rpms in first before shifting? Using taller gears would aid acceleration, but you'd only be going (for example) 47 at 6200 rpms in first. Hope that clarifies it for you
#20
MBWorld Fanatic!
Thread Starter
I'm running 265/40/18 MT ET Streets II and it doesn't spin any of second. Of course it's not comparable running even the best street tires to running MT's. The gears are made by Richmond Gears and they're for Chargers and Challengers that have a 215mm ring gear in the diff. You can get them for around 550.00 a set. They also make 3.23 if you want something less aggressive.
#21
MBWorld Fanatic!
Join Date: Jun 2010
Location: Puerto Rico
Posts: 4,173
Likes: 0
Received 6 Likes
on
5 Posts
2005 E55 AMG
The output of the transmission spins 3.55 time and the wheel will spin once. The stock is 2.65. The number has nothing to do whatsoever with how much horsepower the car can handle.
I'm running 265/40/18 MT ET Streets II and it doesn't spin any of second. Of course it's not comparable running even the best street tires to running MT's. The gears are made by Richmond Gears and they're for Chargers and Challengers that have a 215mm ring gear in the diff. You can get them for around 550.00 a set. They also make 3.23 if you want something less aggressive.
I'm running 265/40/18 MT ET Streets II and it doesn't spin any of second. Of course it's not comparable running even the best street tires to running MT's. The gears are made by Richmond Gears and they're for Chargers and Challengers that have a 215mm ring gear in the diff. You can get them for around 550.00 a set. They also make 3.23 if you want something less aggressive.
#22
MBWorld Fanatic!
How does that benefit us ? Does it help reducing wheel spin and putting more power to the ground ? I mean how exactly is there acceleration gain ? or each gear would have more power available across the rpm band ??
I'm sorry if I'm testing your patience limit but I am just trying to understand what exactly is there which made all of you so happy and I can't even understand
#23
MBWorld Fanatic!
Thread Starter
Transmission spins more faster and the wheel spin rate will remain the same.
How does that benefit us ? Does it help reducing wheel spin and putting more power to the ground ? I mean how exactly is there acceleration gain ? or each gear would have more power available across the rpm band ??
I'm sorry if I'm testing your patience limit but I am just trying to understand what exactly is there which made all of you so happy and I can't even understand
How does that benefit us ? Does it help reducing wheel spin and putting more power to the ground ? I mean how exactly is there acceleration gain ? or each gear would have more power available across the rpm band ??
I'm sorry if I'm testing your patience limit but I am just trying to understand what exactly is there which made all of you so happy and I can't even understand
#24
MBWorld Fanatic!
Transmission spins more faster and the wheel spin rate will remain the same.
How does that benefit us ? Does it help reducing wheel spin and putting more power to the ground ? I mean how exactly is there acceleration gain ? or each gear would have more power available across the rpm band ??
I'm sorry if I'm testing your patience limit but I am just trying to understand what exactly is there which made all of you so happy and I can't even understand
How does that benefit us ? Does it help reducing wheel spin and putting more power to the ground ? I mean how exactly is there acceleration gain ? or each gear would have more power available across the rpm band ??
I'm sorry if I'm testing your patience limit but I am just trying to understand what exactly is there which made all of you so happy and I can't even understand
http://www.carcraft.com/techarticles...s/viewall.html