Eurocharged Euro-Flash! Data Logging, OBDII Code Functions, and ECU Flashing!!
Subscribe
MBWorld Fanatic!
Hey EC, I know you guys are swamped but can you reply to my PM or Emails?
-John
-John
Senior Member
Hi
Jerry from Eurocharged is away on a business trip in London. He will be back around the 12th of March and will start returning all emails and PM's then. If it is something of an urgent nature perhaps try phoning up Eurocharged?
Regards,
OZZYAMG
Jerry from Eurocharged is away on a business trip in London. He will be back around the 12th of March and will start returning all emails and PM's then. If it is something of an urgent nature perhaps try phoning up Eurocharged?
Regards,
OZZYAMG
Quote:
0.779v = 11.45 AFR
Originally Posted by Jerry@Eurocharged
No, no wideband required. The ECU is tuned via Lamda values and that is what we will pull from the OBDII port. Lambda is converted into AFR by multiplying the value by 14.7.0.779v = 11.45 AFR
I know Jerry is overseas....but maybe some else knows. I'm assuming the above table contains target or commanded values, and you'll still need a WB for actual AFR?
MBWorld Fanatic!
Quote:
We are also testing a version of the software that will allow the end user to make a few changes to their own tune. We will provide a base tune and the user can change a few key maps to tailor the tune to their specific needs.
Ignition: + or - 3 degree maximum in a specified load range
Fueling: Specify a lambda value for part and full throttle fueling maps
RPM Limiter: Specify a RPM Limit for Manual Mode
Top Speed: Debating on adding this...the base tune takes care of it but you never know.
Map Sensor Voltage: Adjust the maximum value
This version of the software will not be free and will be available shortly after our initial release.
The hard part is determining what we should allow the user to do.... for obvious reasons.
Jerry, ETA on this ^^^^^?Originally Posted by Jerry@Eurocharged
We are finishing up a few detailed areas of the software and once this is done I will let everyone know.We are also testing a version of the software that will allow the end user to make a few changes to their own tune. We will provide a base tune and the user can change a few key maps to tailor the tune to their specific needs.
Ignition: + or - 3 degree maximum in a specified load range
Fueling: Specify a lambda value for part and full throttle fueling maps
RPM Limiter: Specify a RPM Limit for Manual Mode
Top Speed: Debating on adding this...the base tune takes care of it but you never know.
Map Sensor Voltage: Adjust the maximum value
This version of the software will not be free and will be available shortly after our initial release.
The hard part is determining what we should allow the user to do.... for obvious reasons.
E55Greasemonkey
MBWorld Fanatic!
close
Apr 19, 2026
- Join DateJul 2012
- LocationOrbiting the planet
- Posts:4,503
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I driveThis place is a joke.
-
Likes:1,398
-
Liked:1,510 Times in 999 Posts
Quote:
I'll be tied up while I'm there so we wanted to wait until I got back.
Thanks!
^^^Originally Posted by Jerry@Eurocharged
The software is officially ready for release. We will start shipping the kits and put up a download link when I return from our London tuning day on the 11th.I'll be tied up while I'm there so we wanted to wait until I got back.
Thanks!
SPONSOR
loungn14
SPONSOR
close
Today
- Join DateJul 2007
- LocationHouston/ Austin /Toronto / UAE / Minneapolis / Orlando /Cincinnati
- Posts:5,459
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I driveEurocharged Performance ML63 and TT lambo
-
Likes:406
-
Liked:152 Times in 110 Posts
We are just around the corner with the release!!!
Super Member
Awsome.. I'm ALL over this, can't wait to dial her in with this new product..
Member
looking forward to it, installing my SC pulley next week and cant wait to put the flash on also.
MBWorld Fanatic!
Hot damn, when is that shop car gonna be ready with that mod list?!!!
Member
Quote:
+1Originally Posted by urbamworm
Hot damn, when is that shop car gonna be ready with that mod list?!!!
Super Member
Shop just called and my cable is shipping out today..
MBWorld Fanatic!
Quote:
I liked the last picture the most. The one with the girl beside the car Originally Posted by loungn14
We are just around the corner with the release!!!
So when can i get one of these?
MBWorld Fanatic!
I want one also. I have already bought a few of your guys tunes and pulleys for customer's cars, but I want this for myself.
MBWorld Fanatic!
Wow, looks like great software! Out of curiosity will the programmer pull codes off of other vehicles?
MBWorld Fanatic!
why is this thread have a Nissan tag in it? Hint Hint...... 
TT Z32?
TT Z32?
Member
ive read this thread front to back, i cant tell if the normal one is release yet or not. if i order this on friday how soon could i expect to see it? ive got a 195mm pulley sitting on my bedroom floor, and its just killing me.
Senior Member
I had a sneak peak while Jerry was over in London last week, looks well put together and simple to use.
E55Greasemonkey
MBWorld Fanatic!
close
Apr 19, 2026
- Join DateJul 2012
- LocationOrbiting the planet
- Posts:4,503
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I driveThis place is a joke.
-
Likes:1,398
-
Liked:1,510 Times in 999 Posts
I'm still not clear on where the OBDII data logs are stored? Do you have to drive around with your laptop connected, or is it somehow stored in the adapter cable/interface
SPONSOR
loungn14
SPONSOR
close
Today
- Join DateJul 2007
- LocationHouston/ Austin /Toronto / UAE / Minneapolis / Orlando /Cincinnati
- Posts:5,459
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I driveEurocharged Performance ML63 and TT lambo
-
Likes:406
-
Liked:152 Times in 110 Posts
Quote:
So when can i get one of these?
ya I'm a big fan too (my current girl lol)Originally Posted by e55amgrocket
I liked the last picture the most. The one with the girl beside the car So when can i get one of these?
We are releasing the software this week, the datalogging portion will be a week or two
Quote:
Originally Posted by layzie12g
I want one also. I have already bought a few of your guys tunes and pulleys for customer's cars, but I want this for myself.
You have a cable already?Quote:
good question...Honestly don't know. We have all the logic and drivers for mb, some of which may well read from other vehiclesOriginally Posted by 03'55AMG
Wow, looks like great software! Out of curiosity will the programmer pull codes off of other vehicles?
Quote:
we can take care of that for ya...Originally Posted by S13REMI
ive read this thread front to back, i cant tell if the normal one is release yet or not. if i order this on friday how soon could i expect to see it? ive got a 195mm pulley sitting on my bedroom floor, and its just killing me.
Here's a video of the software guys...
Quote:
Originally Posted by SavMan
I had a sneak peak while Jerry was over in London last week, looks well put together and simple to use.
MBWorld Fanatic!
Quote:
Ignition: + or - 3 degree maximum in a specified load range
Fueling: Specify a lambda value for part and full throttle fueling maps
RPM Limiter: Specify a RPM Limit for Manual Mode
Top Speed: Debating on adding this...the base tune takes care of it but you never know.
Map Sensor Voltage: Adjust the maximum value
This version of the software will not be free and will be available shortly after our initial release.
The hard part is determining what we should allow the user to do.... for obvious reasons.
Loungn14, do you also have a an instructional video for this ^^^ new program or any more info or screen shots? Thanks.Originally Posted by Jerry@Eurocharged
We are also testing a version of the software that will allow the end user to make a few changes to their own tune. We will provide a base tune and the user can change a few key maps to tailor the tune to their specific needs.Ignition: + or - 3 degree maximum in a specified load range
Fueling: Specify a lambda value for part and full throttle fueling maps
RPM Limiter: Specify a RPM Limit for Manual Mode
Top Speed: Debating on adding this...the base tune takes care of it but you never know.
Map Sensor Voltage: Adjust the maximum value
This version of the software will not be free and will be available shortly after our initial release.
The hard part is determining what we should allow the user to do.... for obvious reasons.
SPONSOR
loungn14
SPONSOR
close
Today
- Join DateJul 2007
- LocationHouston/ Austin /Toronto / UAE / Minneapolis / Orlando /Cincinnati
- Posts:5,459
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I driveEurocharged Performance ML63 and TT lambo
-
Likes:406
-
Liked:152 Times in 110 Posts
Quote:
not yet sir, still working on the details on that one. We are just wrapping up the datalogging testing and on to the final testing on the tuning modification next.Originally Posted by jcjmw
Loungn14, do you also have a an instructional video for this ^^^ new program or any more info or screen shots? Thanks.
Member
If I ordered a package with ecu/tcu tune two weeks ago and received the cable already, when can we download or expect to receive the software? Thanks
MBWorld Fanatic!
The primary reason I bought this was for the data logging, where do I send this extra "Data logging software fee"?
MBWorld Fanatic!
Quote:
Ignition: + or - 3 degree maximum in a specified load range
Fueling: Specify a lambda value for part and full throttle fueling maps
RPM Limiter: Specify a RPM Limit for Manual Mode
Top Speed: Debating on adding this...the base tune takes care of it but you never know.
Map Sensor Voltage: Adjust the maximum value
This version of the software will not be free and will be available shortly after our initial release.
The hard part is determining what we should allow the user to do.... for obvious reasons.
What is the ETA on this version of the software? Originally Posted by Jerry@Eurocharged
We are also testing a version of the software that will allow the end user to make a few changes to their own tune. We will provide a base tune and the user can change a few key maps to tailor the tune to their specific needs.Ignition: + or - 3 degree maximum in a specified load range
Fueling: Specify a lambda value for part and full throttle fueling maps
RPM Limiter: Specify a RPM Limit for Manual Mode
Top Speed: Debating on adding this...the base tune takes care of it but you never know.
Map Sensor Voltage: Adjust the maximum value
This version of the software will not be free and will be available shortly after our initial release.
The hard part is determining what we should allow the user to do.... for obvious reasons.
Junior Member
Just got the Eurocharged tune on my E55. Couldn't be happier! Great price, awesome service, fast turnaround. The beast is running much smoother now and pulls harder than ever.
