Eurocharged Euro-Flash! Data Logging, OBDII Code Functions, and ECU Flashing!!
#1
SPONSOR
Thread Starter
Eurocharged Euro-Flash! Data Logging, OBDII Code Functions, and ECU Flashing!!
I’m sure some of you have heard about this over the past few months, but I wanted to formally introduce the software to the community.
Over the past few years we have been using an OBDII cable to do remote tunes for our customers. This has allowed us to reach out to customers in other parts of the world and provide them with the same tune they would get locally! About a year ago, we started looking into ways to improve on this concept and make it more efficient and user friendly. Well, we succeeded and the new version of this software is almost ready for public release.
Euro-Flash is the next generation software package for the Mercedes! It will have full OBDII Data Logging, OBDII Code Reading / Clearing, and you can flash your own car with encoded files sent via email! Customers will be able to data-log AFR, Timing, Boost, IAT’s, RPM, Throttle Position, ETC and our software will create a file that is easily readable.
It’s never been easier to get a custom tune!
Here are the top 10 benefits when you go with Eurocharged over the competition:
1.) No need to send out ECU
2.) No need to buy an expensive tool
3.) No need to pay loaner tool fee’s
4.) Real Time Data Logging
5.) OBDII Code Reading and Clearing
6.) Updated Tunes sent via email
7.) Dyno Tuning is much easier
8.) Customer Support
9.) TCU Flashing will be supported in a future release
10.) Swapping Tunes at the track takes only a few minutes
This software has been tested on the following ECU’s:
ME 2.8 / ME 2.8.1 (320 series, 500 series, 32AMG, 55AMG, SRT6, etc)
ME 2.7.1 (2003-2006 V12’s 600/65)
Still having trouble deciding on which tuner to go with? We are now offering very attractive pricing on our tunes.
55 AMG - $399 (Cable included)
600 - $499 (Cable included)
65 AMG - $499 (Cable included)
2000-2006 MB’s not mentioned above - $350 (Cable included)
Over the past few years we have been using an OBDII cable to do remote tunes for our customers. This has allowed us to reach out to customers in other parts of the world and provide them with the same tune they would get locally! About a year ago, we started looking into ways to improve on this concept and make it more efficient and user friendly. Well, we succeeded and the new version of this software is almost ready for public release.
Euro-Flash is the next generation software package for the Mercedes! It will have full OBDII Data Logging, OBDII Code Reading / Clearing, and you can flash your own car with encoded files sent via email! Customers will be able to data-log AFR, Timing, Boost, IAT’s, RPM, Throttle Position, ETC and our software will create a file that is easily readable.
It’s never been easier to get a custom tune!
Here are the top 10 benefits when you go with Eurocharged over the competition:
1.) No need to send out ECU
2.) No need to buy an expensive tool
3.) No need to pay loaner tool fee’s
4.) Real Time Data Logging
5.) OBDII Code Reading and Clearing
6.) Updated Tunes sent via email
7.) Dyno Tuning is much easier
8.) Customer Support
9.) TCU Flashing will be supported in a future release
10.) Swapping Tunes at the track takes only a few minutes
This software has been tested on the following ECU’s:
ME 2.8 / ME 2.8.1 (320 series, 500 series, 32AMG, 55AMG, SRT6, etc)
ME 2.7.1 (2003-2006 V12’s 600/65)
Still having trouble deciding on which tuner to go with? We are now offering very attractive pricing on our tunes.
55 AMG - $399 (Cable included)
600 - $499 (Cable included)
65 AMG - $499 (Cable included)
2000-2006 MB’s not mentioned above - $350 (Cable included)
#7
SPONSOR
Thread Starter
The software is universal and can be used on all cars. The tune file is encoded to your car / VIN. You can use this software to flash multiple Mercedes, but each VIN will require a license. Keep in mind that the OBDII Logging, Code Reading / Clearing will NOT require a license per VIN. :-)
I'm bringing it with me to London Paul!
Development has been started for the flashing portion. The OBDII functions are ready and will work.
:-)
I'm bringing it with me to London Paul!
Development has been started for the flashing portion. The OBDII functions are ready and will work.
:-)
Trending Topics
#8
SPONSOR
Thread Starter
We are still discussing this internally, but I'm thinking you will get the stock file and 2 tune files included with the tune that you purchased. All customers that bought our tune before 2013 are entitled to free reflashes.
Please keep in mind that dyno tuning does not count as a reflash.
Please keep in mind that dyno tuning does not count as a reflash.
#9
Super Member
Join Date: Mar 2011
Location: Porter Ranch, CA
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
E55, CTS-V Wagon, Duc 1098R
Hey Jerry, is this an upgrade to the my genius or new hardware? For those of us that have a my genius will you still support it or provide an upgrade path?
#10
SPONSOR
Thread Starter
The MyGenius is a fantastic tool and it does the flashing portion of the ECU perfectly. You can choose to trade in the MyGenius for the new software and cable at no charge if you'd like.
#11
Senior Member
Jerry can you explain how this tool helps with remote dyno tuning....Ive spoken to EC Toronto, about working with you for some remote dyno tuning this spring.
Thanks
Bob
Thanks
Bob
#12
MBWorld Fanatic!
Join Date: Jul 2012
Location: Orbiting the planet
Posts: 4,478
Received 1,490 Likes
on
986 Posts
This place is a joke.
Do we need a separate wideband O2 for the data logging? What is the cost for customers who bought a tune pre-2013? Very interested in this, although I was remote dyno tuned by you as well, the tune still feel a little off and I have a feeling I'm too rich...need to data log,and was getting ready for a wideband setup but this sounds much better.
#13
MBWorld Fanatic!
Do we need a separate wideband O2 for the data logging? What is the cost for customers who bought a tune pre-2013? Very interested in this, although I was remote dyno tuned by you as well, the tune still feel a little off and I have a feeling I'm too rich...need to data log,and was getting ready for a wideband setup but this sounds much better.
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
#14
SPONSOR
Thread Starter
Do we need a separate wideband O2 for the data logging? What is the cost for customers who bought a tune pre-2013? Very interested in this, although I was remote dyno tuned by you as well, the tune still feel a little off and I have a feeling I'm too rich...need to data log,and was getting ready for a wideband setup but this sounds much better.
0.779v = 11.45 AFR
![](http://www.eurocharged.com/images/AFR.jpg)
The log will look like this. You can add and remove any columns you want. There are about 40 more items to log.
![](http://www.eurocharged.com/images/Log.jpg)
There is no charge for this software. It will be included FREE with all Eurocharged tunes purchased....unless you guys think we should charge for it. LOL
We just want to everyone to know that we are commited to making these cars faster, safer, and more fun to drive. I personally think this software is the next step.
I'm sure there are a few guys on here that will confirm this....we have tuned a few 55's on the forum using nothing but data logs and the end result is better than that of a dyno tune.
#18
SPONSOR
Thread Starter
We are also testing a version of the software that will allow the end user to make a few changes to their own tune. We will provide a base tune and the user can change a few key maps to tailor the tune to their specific needs.
Ignition: + or - 3 degree maximum in a specified load range
Fueling: Specify a lambda value for part and full throttle fueling maps
RPM Limiter: Specify a RPM Limit for Manual Mode
Top Speed: Debating on adding this...the base tune takes care of it but you never know.
Map Sensor Voltage: Adjust the maximum value
This version of the software will not be free and will be available shortly after our initial release.
The hard part is determining what we should allow the user to do.... for obvious reasons.
#19
SPONSOR
Thread Starter
#20
MBWorld Fanatic!
We are finishing up a few detailed areas of the software and once this is done I will let everyone know.
We are also testing a version of the software that will allow the end user to make a few changes to their own tune. We will provide a base tune and the user can change a few key maps to tailor the tune to their specific needs.
Ignition: + or - 3 degree maximum in a specified load range
Fueling: Specify a lambda value for part and full throttle fueling maps
RPM Limiter: Specify a RPM Limit for Manual Mode
Top Speed: Debating on adding this...the base tune takes care of it but you never know.
Map Sensor Voltage: Adjust the maximum value
This version of the software will not be free and will be available shortly after our initial release.
The hard part is determining what we should allow the user to do.... for obvious reasons.
We are also testing a version of the software that will allow the end user to make a few changes to their own tune. We will provide a base tune and the user can change a few key maps to tailor the tune to their specific needs.
Ignition: + or - 3 degree maximum in a specified load range
Fueling: Specify a lambda value for part and full throttle fueling maps
RPM Limiter: Specify a RPM Limit for Manual Mode
Top Speed: Debating on adding this...the base tune takes care of it but you never know.
Map Sensor Voltage: Adjust the maximum value
This version of the software will not be free and will be available shortly after our initial release.
The hard part is determining what we should allow the user to do.... for obvious reasons.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#21
MBWorld Fanatic!
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
We are finishing up a few detailed areas of the software and once this is done I will let everyone know.
We are also testing a version of the software that will allow the end user to make a few changes to their own tune. We will provide a base tune and the user can change a few key maps to tailor the tune to their specific needs.
Ignition: + or - 3 degree maximum in a specified load range
Fueling: Specify a lambda value for part and full throttle fueling maps
RPM Limiter: Specify a RPM Limit for Manual Mode
Top Speed: Debating on adding this...the base tune takes care of it but you never know.
Map Sensor Voltage: Adjust the maximum value
This version of the software will not be free and will be available shortly after our initial release.
The hard part is determining what we should allow the user to do.... for obvious reasons.
We are also testing a version of the software that will allow the end user to make a few changes to their own tune. We will provide a base tune and the user can change a few key maps to tailor the tune to their specific needs.
Ignition: + or - 3 degree maximum in a specified load range
Fueling: Specify a lambda value for part and full throttle fueling maps
RPM Limiter: Specify a RPM Limit for Manual Mode
Top Speed: Debating on adding this...the base tune takes care of it but you never know.
Map Sensor Voltage: Adjust the maximum value
This version of the software will not be free and will be available shortly after our initial release.
The hard part is determining what we should allow the user to do.... for obvious reasons.
#22
MBWorld Fanatic!
Hey, I have had the same question regarding tuning I always thought would get asked first, but I want to know now. Is it possible to remove/extend the rev limiter in park and neutral without hitting the 10mph mark?