My definitive Bruce@TTM HORROR STORY.
#452
MBWorld Fanatic!
Join Date: Mar 2011
Location: The Granite State
Posts: 1,835
Likes: 0
Received 12 Likes
on
8 Posts
.
I have no dog in this fight but I didn't drink the ttm after the first 5 min of talking to him 3 years ago when I needed a tune.He said his tune was from a company called pes tuning and he wanted 2k for his tune.When I started asking about it he said his tune will cover cams-huge pulley and was the best option out there,ohh man how I wanted to just laugh at him and I played it dumb and pretending to eat up what he was saying.He couldn't even tell me how much timing advanced was in his tune and wanted me to use some mickey mouse 02 extenders to get rid of the check engine light from not having cats.
at that very second on the phone I new this guy was a joke and saw a thread of 930chas with his car and he had nothing but tuning problems with his pes(pos tune)from bruce.
10 min after getting off the phone from him I called kleemann and never looked back.
He was basically **** talking about every tuner on here and ohh man what he had to say about jerry and the eurocharged guys.Iv had my fun building my car and they have come a long way to where they are now and honestly wished they were at the level they are now when I was trying to get my car up and running with them back in the day.
that guy was playing both sides and would try to sell you anything and everything making you think its the best crap out there and I almost believed his box tune from pes would run fine on my car with cams and no cats.I almost blew 2k for that tune and kleemann only charged me 1199 and did an update once for free.
He then comes on here telling me he was the one to fix the 82mm tb by using star and Jerry can chime in because I clearly remember telling him and texting back and forth like 4 years ago trying to get eurocharged tb kit to work right and my car was very picky on the tps% and Jerry and the eurochargered crew were going to send me a star unit to try and see if upping the throttle would fix the codes.
this was all done behind the sceens and I think I have my old cell phone from 4 years ago with these texts saved on it.
at that very second on the phone I new this guy was a joke and saw a thread of 930chas with his car and he had nothing but tuning problems with his pes(pos tune)from bruce.
10 min after getting off the phone from him I called kleemann and never looked back.
He was basically **** talking about every tuner on here and ohh man what he had to say about jerry and the eurocharged guys.Iv had my fun building my car and they have come a long way to where they are now and honestly wished they were at the level they are now when I was trying to get my car up and running with them back in the day.
that guy was playing both sides and would try to sell you anything and everything making you think its the best crap out there and I almost believed his box tune from pes would run fine on my car with cams and no cats.I almost blew 2k for that tune and kleemann only charged me 1199 and did an update once for free.
He then comes on here telling me he was the one to fix the 82mm tb by using star and Jerry can chime in because I clearly remember telling him and texting back and forth like 4 years ago trying to get eurocharged tb kit to work right and my car was very picky on the tps% and Jerry and the eurochargered crew were going to send me a star unit to try and see if upping the throttle would fix the codes.
this was all done behind the sceens and I think I have my old cell phone from 4 years ago with these texts saved on it.
I find this lecture about honesty and integrity hysterically funny.
Maybe the reason you couldn't get good advice from vendors is because you didn't mention that your E55 has a top-secret SLR motor swap....
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
Start by being honest about yourself. Your credibility is basically zero on this site after your recent stunts...
-G
#453
Hey guys.
OP I pray you get your situation resolved.
Now that TTM is no longer around, or hiding, or whatever, can we rip off his scoops?
If someone would send me their set I will take it to a fabricator out here and get copies made. I will sell them at 0 profit. They can't cost more than $20-$30 with materials and labor. I mean, one guy folding sheet metal can make 20 sets in an hour? Imagine if every member here had a set?? It would be great. In fact, we should have a pay it forward thread and give out a set for free to every new member that joins this community.
BTW, if the TTM scoop blueprint/idea/design belongs to another sponsor here, I am truly sorry about the above comment and I was just kidding. If not, let's seriously do it.
OP I pray you get your situation resolved.
Now that TTM is no longer around, or hiding, or whatever, can we rip off his scoops?
If someone would send me their set I will take it to a fabricator out here and get copies made. I will sell them at 0 profit. They can't cost more than $20-$30 with materials and labor. I mean, one guy folding sheet metal can make 20 sets in an hour? Imagine if every member here had a set?? It would be great. In fact, we should have a pay it forward thread and give out a set for free to every new member that joins this community.
BTW, if the TTM scoop blueprint/idea/design belongs to another sponsor here, I am truly sorry about the above comment and I was just kidding. If not, let's seriously do it.
I dont think they will be sold at $20-30 each. Maybe if you ran a production of a 1000 qty?
#454
Oh, Greg, you didn't know? Every 55K motor makes SLR power with a pulley and tune.
moose - can you elaborate on the benefits of the TTM scoops? From a performance perspective...thank you, sir.
moose - can you elaborate on the benefits of the TTM scoops? From a performance perspective...thank you, sir.
#455
Member
Join Date: Mar 2013
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
2005 E55, 11 second truck, ducati streetfighter 1098
We (or I) were always told that the TTM scoops had a patent pending. After recent events I am led to believe that may not be the case. Fabtech copied them but they were not metal but FRP and i think he printed them with a 3-D printer. I think that may be our best bet is printing them in 3D and using that as a template to make out of steel or aluminum. The TTM units were made out of metal and welded. They were not the best welds. Your talking about bending the aluminum like it was duct work on a press.
I dont think they will be sold at $20-30 each. Maybe if you ran a production of a 1000 qty?
I dont think they will be sold at $20-30 each. Maybe if you ran a production of a 1000 qty?
#456
MBWorld Fanatic!
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
Sorry to hear about your troubles. I wouldn't expect to hear from Bruce anytime soon on this forum. Soon as the OP lawyered up everything he says on here would be admissible in court so he wouldn't incriminate himself on here discussing it.
Just an FYI for everyone else adding testimonials about TTM in this thread don't be surprised if you get subpoenaed to court for it.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Question though: How do you give someone 4K in cash without putting it in their hand?
#457
some people say that to make people shy away from doing it. not sure how you could even patent it to make others not do it plus the roughly $6000 cost to do so. that would be interesting if made on a printer as that's not very cheap to do. I can get these done, im looking to make a set for my car anway. obv im not a sponsor but I sure as **** know they can be done for way less then was being charged. def not 20-30 per set fully welded, too much time into. at least if made in USA
#458
MBWorld Fanatic!
Join Date: Dec 2008
Posts: 7,226
Likes: 0
Received 6 Likes
on
5 Posts
3-five-five/ TUNDRA/ 07 997 cab
I find this lecture about honesty and integrity hysterically funny.
Maybe the reason you couldn't get good advice from vendors is because you didn't mention that your E55 has a top-secret SLR motor swap....![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
Start by being honest about yourself. Your credibility is basically zero on this site after your recent stunts...
-G
Maybe the reason you couldn't get good advice from vendors is because you didn't mention that your E55 has a top-secret SLR motor swap....
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
Start by being honest about yourself. Your credibility is basically zero on this site after your recent stunts...
-G
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
#459
MBWorld Fanatic!
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
Sorry to hear about your troubles. I wouldn't expect to hear from Bruce anytime soon on this forum. Soon as the OP lawyered up everything he says on here would be admissible in court so he wouldn't incriminate himself on here discussing it.
Just an FYI for everyone else adding testimonials about TTM in this thread don't be surprised if you get subpoenaed to court for it.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Question though: How do you give someone 4K in cash without putting it in their hand?
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
#462
MBWorld Fanatic!
Where are we at on these scoops?? Someone please post detailed pics with measurements of each fold. Also what the hole in the back looks like, measurement as well of the diameter.
What should we have logo read? Someone good on PS want to design something cool? It can be the first ever MBWorld member collaboration.
Again, this will be a NON FOR PROFIT project that we can all have some say in.
What should we have logo read? Someone good on PS want to design something cool? It can be the first ever MBWorld member collaboration.
Again, this will be a NON FOR PROFIT project that we can all have some say in.
#465
MBWorld Fanatic!
Join Date: Oct 2011
Location: A to the Z (the state)
Posts: 2,279
Likes: 0
Received 26 Likes
on
21 Posts
'06 E55
lol, the email probably looked like this:
-----Original Message-----
From: Grandma (granmaofascammer@moneytakers.com)
Sent: Wednesday, July 24, 2013 11:02 AM
To: Bruce (icanbeboughtlikeawhore@moneytakers.com)
Subject: FW:FW:FW:FW:FW:FW: Resend this to 8 people in the next 8 minutes and you will go to heaven!!!!!
-----Original Message-----
From: Grandma (granmaofascammer@moneytakers.com)
Sent: Wednesday, July 24, 2013 11:02 AM
To: Bruce (icanbeboughtlikeawhore@moneytakers.com)
Subject: FW:FW:FW:FW:FW:FW: Resend this to 8 people in the next 8 minutes and you will go to heaven!!!!!
Last edited by Denroll; 07-25-2013 at 12:40 PM.
#466
I'm surprised our Chinese friends overseas haven't fabricated something identical to the TTM Scoops as of yet. Or maybe I'm wrong on that notion
, regardless I'm in line with the rest of you guys who are looking to get there hands on a pair of Scoops.
P.S to the OP, keep your head up high what comes around goes around. I"m surprised Paypal didn't cover your loss even if you chose the option for goods, I'm assuming Paypal gives you coverage.....
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
P.S to the OP, keep your head up high what comes around goes around. I"m surprised Paypal didn't cover your loss even if you chose the option for goods, I'm assuming Paypal gives you coverage.....
#468
One factory's previous work for me:
![](https://mbworld.org/forums/members/ghettoroadster-231167-albums-e55-exhaust-10088-picture-center-resonator-38583.jpg)
They also do intercoolers, heat exchangers, blah blah blah, and are SEMA participants.
An MQC of 100 in steel, with only 1 single painted color (not powdercoat) would probably be needed, and getting the set (INCLUDING SCREWS THAT FIT GDAMNIT..
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
Really rough numbers here as I don't have the scoops at the desk, but we can think of this part as the crowdsourced/kickstarter "MBW's very own air thingies that do nothing" (no TM, no PP).
#475
Senior Member
Join Date: Apr 2013
Location: Gainesville, FL: In a garage or in a bar, or a garage with a bar in it.
Posts: 472
Likes: 0
Received 4 Likes
on
4 Posts
2005 E55, 2011 Honda Push Mower (21 inch deck bishes)
For 45 bux I'd be completely in. Honestly if they are any color it should be black (neutral) and then folks can rattle can them/pay to have them powdercoated in any color they want. It will still be wayyyyy cheaper than the TTm scoops. Slap on some 8 dollar Ebay AMG stickers and we're golden.