jcjmw

I just unwrapped my AEM meth kit. I noticed there is the AEM "water / methanol injection controller." On this controller there is a part that sticks out to hook up the vacum/boost line. Can you tell me from where on the engine did you connect up to this vacuum/boost part of the controller? If you possible, can you post a pic? That would greatly help. Thanks.

chawkins2001

ask and you shall receive that second pic is on the passenger side of the blower near the firewall.

jcjmw

Thanks! I did not want to bother you on X mas day.

jcjmw

Craig, have you tried putting a meth nozzle in that opening next to the opening you used for the boost measurement?

chawkins2001

no, I do have my second nozzle in the garage waiting to go in. I have done some research, and I am leaning towards putting it opposite the first nozzle.

jcjmw

Ok, let me know how it goes.

chawkins2001

we may test that location first since no drilling is required.

jcjmw

Alright!

By chance, you know the size of the nipple (or whatever you call it) that you used so the boost vacuum line can connect to it?

xtremektm

I also have the AEM water meth kit. Do you have any picture for the location of the nozzle in the intercooler, i installed post intercooler but is to close to the IAT. The problen is that the AEM nozzle is too long.
Thank