Mercedes dual electric exhaust cut-out kit
#1
Former Vendor of MBWorld
Thread Starter
Mercedes dual electric exhaust cut-out kit
We have just signed on with Quick Time Performance to carry their parts on the West Coast so I wanted to take this opportunity to put a kit together that fits well on the Mercedes Benz's with dual exhaust. The low-profile oval electric cut-outs fit perfectly on the piping that goes between the rear end and the mufflers. They mount easily while pointing perfectly out the back of the vehicle where you want them to. These cut-outs fit so perfectly, you would think that they were manufactured specifically for the Mercedes Benz. These can easily be installed by any muffler shop.
In the kit we put together we have included two oval electric cut-outs (1 for each pipe), 2 oval turndowns (1 for each cut-out) and the wireless remote kit so you do not have to drill or install a switch anywhere.
If you have been looking to increase the noise from your Mercedes, this is the perfect way to do it. You can go from stock sound to loud sound at the touch of a button and at a fraction of the price of an aftermarket exhaust.
Please PM me for price.
DUAL ELECTRIC CUTOUTS
OVAL TURN DOWNS (kit comes with 2)
WIRELESS REMOTE
In the kit we put together we have included two oval electric cut-outs (1 for each pipe), 2 oval turndowns (1 for each cut-out) and the wireless remote kit so you do not have to drill or install a switch anywhere.
If you have been looking to increase the noise from your Mercedes, this is the perfect way to do it. You can go from stock sound to loud sound at the touch of a button and at a fraction of the price of an aftermarket exhaust.
Please PM me for price.
DUAL ELECTRIC CUTOUTS
OVAL TURN DOWNS (kit comes with 2)
WIRELESS REMOTE
The following users liked this post:
AMGcurious (11-13-2022)
Trending Topics
#9
Former Vendor of MBWorld
Thread Starter
#10
If you have a cat delete, could stick them where the cat was.
My friend had electric cutouts on his E55 and they were a blast. He has since switched to a exhaust vacuum bypass flap (straight from a Lamborghini exhaust!), and it's connected so it exhaust flap opens when fog lights are on and throttle is fully open. It goes from open to close in a fraction of a second. The install was much more complicated for the flapper setup, and electric cutouts sounded just as good.
My friend had electric cutouts on his E55 and they were a blast. He has since switched to a exhaust vacuum bypass flap (straight from a Lamborghini exhaust!), and it's connected so it exhaust flap opens when fog lights are on and throttle is fully open. It goes from open to close in a fraction of a second. The install was much more complicated for the flapper setup, and electric cutouts sounded just as good.
#11
Former Vendor of MBWorld
Thread Starter
If you have a cat delete, could stick them where the cat was.
My friend had electric cutouts on his E55 and they were a blast. He has since switched to a exhaust vacuum bypass flap (straight from a Lamborghini exhaust!), and it's connected so it exhaust flap opens when fog lights are on and throttle is fully open. It goes from open to close in a fraction of a second. The install was much more complicated for the flapper setup, and electric cutouts sounded just as good.
My friend had electric cutouts on his E55 and they were a blast. He has since switched to a exhaust vacuum bypass flap (straight from a Lamborghini exhaust!), and it's connected so it exhaust flap opens when fog lights are on and throttle is fully open. It goes from open to close in a fraction of a second. The install was much more complicated for the flapper setup, and electric cutouts sounded just as good.
#12
MBWorld Fanatic!
A lot of Caddi guys are using this setup, and you would think it is part of the factory exhaust it looks so clean under there. That pic above showing the cutouts is not the norm, I have not seen anything like that on a proper install.
The remote is sick too, scares a lot of people lol.
The remote is sick too, scares a lot of people lol.
#16
MBWorld Fanatic!
#18
Junior Member
Join Date: Sep 2010
Location: Long Beach, Ca
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
2006 E55 2011 C300 2002 S600
Just got my cut-outs today Had them weld the piping in, then finished up the installation and wiring myself. Criag from World Motorsport was very professional and helpful, also gave me awesome tour of the shop.
Here a video with the Cut-out open Acceleration at WOT
Here a video with the Cut-out open Acceleration at WOT
#19
Super Member
Just got my cut-outs today Had them weld the piping in, then finished up the installation and wiring myself. Criag from World Motorsport was very professional and helpful, also gave me awesome tour of the shop.
Here a video with the Cut-out open Acceleration at WOT
https://www.youtube.com/watch?v=eVCx6FVMpC4
Here a video with the Cut-out open Acceleration at WOT
https://www.youtube.com/watch?v=eVCx6FVMpC4
#22
Junior Member
Join Date: Sep 2010
Location: Long Beach, Ca
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
2006 E55 2011 C300 2002 S600
#23
Junior Member
Join Date: Sep 2010
Location: Long Beach, Ca
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
2006 E55 2011 C300 2002 S600
Need anymore info try googling it LOL
#25
Junior Member
Join Date: Sep 2010
Location: Long Beach, Ca
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
2006 E55 2011 C300 2002 S600