Garage door opener, would really appreciate some help
I would really appreciate some help with this issue.
Josh
I would really appreciate some help with this issue.
Josh




I would really appreciate some help with this issue.
Josh
hold the outside two buttons down for about 20 seconds or until you see the light change in pulse. This will reset the buttons.
then pick the button of the homelink you want to program and hold your remote opener next to it (within a few inches) press both buttons and hold until you see the light pulse change frequency
This then should be good enough to open garage door unless you have a rolling code garage door opener. If you do you will have to find the learn button on the actual motor of the garage door opener and press it. You then have about 30 seconds to go to your car and press the programmed button two or three times. The presses should be short and continuous and then the button should be programmed.
Remember this is from memory and the manual is much more clear.
Last edited by Vic55; Jan 4, 2012 at 11:34 AM.




Trending Topics
The Best of Mercedes & AMG








