Paint Correction: 2011 Jet Black E63
Post up any questions you might have.

Severe swirling on driver side fender:

Severe swirling on hood:

Driver side door before and after paint correction w/ Chemical Guys V-series:

Close-up of driver side door:

Passenger side door before and after paint correction w/ Chemical Guys V-series:

Finished; Chemical Guys Pete's 53 wax applied:








I had to say that just in case.... car looks great

Surely:
3M Adhesive Cleaner
CG Fade2Black
CG Bare Bones
CG Citrus Wash & Gloss
CG Diablo Wheel Gel
CG EZ Creme Glaze
CG E-zyme Paste Wax
CG Fabric Guard
CG Green Clean
CG Grime Reaper
CG JetSeal109
CG Project J97 Paste Wax
CG Leather Cleaner & Conditioner
CG Lightning Fast Stain Extractor
CG Maxi Suds II
CG Metal Shine
CG Polishing Pad Conditioner
CG Speed Wipe
CG Synthetic Quick Detailer
CG V.R.T. Dressing
CG Water Spot Remover
CG Wax Applicator
CG Wheel Clean
CG Window Clean
Elastic European Clay
P21S Metal Polishing Soap
Hardware
3M Sun Gun
Air Vantage 050300 Random Orbital Sander
Boji Hi-Capacity Water Softener
Cam Spray 1500A Pressure Washer
CG Contoured Tire Dressing Applicator
CG Detailing Gloves
CG Lightning Fast Tire Brush
CG Monster Microfiber Towels (16x16)
CG Polishing Towels
CG 3" Rotary Backing Plate
CG 6" Rotary Backing Plate (Self-Centering Pads)
CG Rotary Carpet Brush
CG Self-Centered Pads
CR Spotless DIC-20 Water De-ionizer
Defelsko PosiTector 200 (Advanced)
Defelsko PosiTector 6000 (FSN2)
Dewalt D55168 Air Compressor
Grit Guard Pad Washer
Makita 9227C Rotary Polisher
Mytee Lite II 8070 Carpet Extractor
Norco 71202A Floor Jack
Ridgid WD1250 Wet/Dry Vacuum
Snap-on BRUTUS3R250D Torque Wrench
VX5000 Industrial Steam Cleaner
Beauty of the color black. It's unfortunate that maintenance of the color is overwhelming--plus the heat of the summer for that color.
Trending Topics
The Best of Mercedes & AMG
This job in particular was $800 and took 40 hours to complete.
I have the same paint code on my 2010 and I have slight swirling. Nothing as bad as pictured above. I plan on using Menzerna SF4000 polish and Adam's Machine Wax as my last step protection.
Did you have to do any paint correction on the bumpers? Did you hand apply or use the PC on the bumpers? I don't have a 3" orbital so I'm thinking woth all those small areas on the bumper I may have to hand wax.
Sounds like a good deal.
Did you say you had to color sand or just heavily cut and polish?
Did you have to deal with any deep scratches and chips?





