Wheels! Let's See Your Opinions!
Thread Starter
Senior Member
Joined: Jun 2009
Posts: 456
Likes: 0
From: Fort Lee, NJ
2014 E63-S, 1987 190E 2.3-16, 1985 325E
Wheels! Let's See Your Opinions!
Hey guys! So... I've always been huge on wheels, I think the stock wheels are beautiful on this car, but knowing me, before I know it I'll want wheels, here's what I'm considering, and I want your opinions, or even ideas. Looking for 20", 10 spoke, smoked machine faces, chrome lips.
ADV10's - I understand their quality isn't worth the cost, but this wheel looks so damn sexy, I also understand that they weigh a ton. Double thumbs down.
HRE-563R's - Great quality and weight comes from these guys, they are wheel legends, but... this design is so outdated in my opinion, and it looks cheap, I looked them up on google, and they just don't look aggressive.
Vorsteiner-VS360's - Haven't heard much about their wheel quality, I don't know if I can trust them enough, just on the fact that they make quality body kits, and accents. Beautiful wheel nonetheless.
ADV10's - I understand their quality isn't worth the cost, but this wheel looks so damn sexy, I also understand that they weigh a ton. Double thumbs down.
HRE-563R's - Great quality and weight comes from these guys, they are wheel legends, but... this design is so outdated in my opinion, and it looks cheap, I looked them up on google, and they just don't look aggressive.
Vorsteiner-VS360's - Haven't heard much about their wheel quality, I don't know if I can trust them enough, just on the fact that they make quality body kits, and accents. Beautiful wheel nonetheless.
Super Member
Joined: Dec 2009
Posts: 509
Likes: 36
From: Ohio
2021 GLS63
I would go HRE>Vorsteiner>ADV for the reasons you stated.
CHeck out HREs monoblock P series. Beautiful and light. Not cheap...
My two favs:
P101:
P104:
Also check out Klassen ID. Made in Cali, forged, light. Vic55 likes his.
My fav M52R: This would be my purchase:
M55 is nice and closer to stock:
X
CHeck out HREs monoblock P series. Beautiful and light. Not cheap...
My two favs:
P101:
P104:
Also check out Klassen ID. Made in Cali, forged, light. Vic55 likes his.
My fav M52R: This would be my purchase:
M55 is nice and closer to stock:
X
Thread Starter
Senior Member
Joined: Jun 2009
Posts: 456
Likes: 0
From: Fort Lee, NJ
2014 E63-S, 1987 190E 2.3-16, 1985 325E
http://www.ssr-wheels.com/wheels/cv01s.asp
Beautiful wheel, SSR makes some quality stuff, what you guys think?
Beautiful wheel, SSR makes some quality stuff, what you guys think?
Super Member
Joined: Dec 2009
Posts: 509
Likes: 36
From: Ohio
2021 GLS63
http://www.ssr-wheels.com/wheels/cv01s.asp Beautiful wheel, SSR makes some quality stuff, what you guys think?
X
Trending Topics
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
MBWorld Fanatic!
Joined: Dec 2003
Posts: 6,279
Likes: 58
From: OC
i drive them all, fast and hard
MBWorld God!
Joined: Jul 2010
Posts: 31,273
Likes: 3,916
From: on my way
2012 CLS63
OP have you considered Vossen?
my last dealing with HRE was frustrating to say the least.........
I have 5 sets and they're all beautiful..........
good luck, and don't worry, someone will have some for sale soon
my last dealing with HRE was frustrating to say the least.........
I have 5 sets and they're all beautiful..........
good luck, and don't worry, someone will have some for sale soon
Member
Joined: May 2011
Posts: 127
Likes: 0
2015 ML63
Car was rubbing originally but after the 3 mm taken of i put my kid with the wife in the back seat and full trunk of crap and it is perfect. No rubbing and also if i stayed with 285 which I didn't want I would not have to mill the wheels but I put 6k on these wheels so far and no problems. The car is not lowered.
Member
Joined: May 2011
Posts: 127
Likes: 0
2015 ML63
Car was rubbing originally but after the 3 mm taken of i put my kid with the wife in the back seat and full trunk of crap and it is perfect. No rubbing and also if i stayed with 285 which I didn't want I would not have to mill the wheels but I put 6k on these wheels so far and no problems. The car is not lowered.
MBWorld Fanatic!
Joined: Dec 2003
Posts: 6,279
Likes: 58
From: OC
i drive them all, fast and hard
looks pretty good, nice to keep that side wall instead of going to a 30 section in front and a 25 in the rear as most people with 20s do. ... but as u know your rolling diameter is a little bigger than stock, so not sure if that really play into affecting the cars performance
i know the weistec black E has 255 35 and 295 30 Mich PSS with 20s and they had to do alot of fender work to keep it from rubbing. Its lowered with their own brand front spring and they say the rear levels out per the cpu automatically....
i know the weistec black E has 255 35 and 295 30 Mich PSS with 20s and they had to do alot of fender work to keep it from rubbing. Its lowered with their own brand front spring and they say the rear levels out per the cpu automatically....
MBWorld Fanatic!
Joined: Dec 2003
Posts: 6,279
Likes: 58
From: OC
i drive them all, fast and hard
why frustrating, would they not paint the wheels color of your liking?
Newbie
Joined: Jan 2014
Posts: 1
Likes: 0
04 e320
Hey everyone I'm new to this site:-) I wanted to say I really like those wheels I have the same looking ones but Mine are made by euro mag probably half the cost got 20's put on my e320 and it sits perfect with the coil overs
Member
Joined: May 2011
Posts: 127
Likes: 0
2015 ML63
looks pretty good, nice to keep that side wall instead of going to a 30 section in front and a 25 in the rear as most people with 20s do. ... but as u know your rolling diameter is a little bigger than stock, so not sure if that really play into affecting the cars performance i know the weistec black E has 255 35 and 295 30 Mich PSS with 20s and they had to do alot of fender work to keep it from rubbing. Its lowered with their own brand front spring and they say the rear levels out per the cpu automatically....
Also on the stock wheels I have painted them black and did 295 on the rear Michelin Super Sports without any issues
MBWorld Fanatic!
Joined: Dec 2003
Posts: 6,279
Likes: 58
From: OC
i drive them all, fast and hard
yup, i remember those pics....helped to finalize my decision to go with them....a little bulgy but i like, good rim protection
its amazing how tires make such a difference in performance....the car is much more planted when u put your foot down, than the pzeros....which werent bad...but wow....just hope they can last as long
its amazing how tires make such a difference in performance....the car is much more planted when u put your foot down, than the pzeros....which werent bad...but wow....just hope they can last as long
Former Vendor of MBWorld
Joined: Feb 2011
Posts: 947
Likes: 3
A car
PM sent.
Thread Starter
Senior Member
Joined: Jun 2009
Posts: 456
Likes: 0
From: Fort Lee, NJ
2014 E63-S, 1987 190E 2.3-16, 1985 325E
I would never put vossens on a performance car, they are not the best of quality, and definitely won't give you the performance, cast wheels are a no-no for me when it comes to sports cars, I really like the HRE S101's too, I think the car can pull it off, opinions?
