Full Euro Intelligent Light system via vediamo




For actual functionality, do you believe that there are different 'steps or levels' of ILS? i.e. Will your Vediamo method of activating ILS have different modes that Vlad's OBD flash does not offer?
Again, thanks for all of the useful posts!
For actual functionality, do you believe that there are different 'steps or levels' of ILS? i.e. Will your Vediamo method of activating ILS have different modes that Vlad's OBD flash does not offer?
Again, thanks for all of the useful posts!

Maybe they did, maybe they didnt, i dont know. I can only speak for my coding




https://www.facebook.com/groups/w212...3018821694203/
He's reputable and has tons of reviews. He quoted me $220 for ILS+ last year.
-Amg menu
-Sport plus mode (Agility mode) only if you don't have a separate sport button for the automatic transmission.
-Manual mode
-Last mode. Meaning when you start the car the automatic transmission will remember in wich mode you was last time. This way you can always start in S mode for example. Only for facelift models.
-Higher V-max on locked cars (US and Japan models have always limited Vmax even Amgs) V-max = Maximum speed
-better gas pedal response by getting rid of the gas pedal delay/lag
-ILS plus unlock on US models if the right hardware already there (US models that have ILS plus capable headlights cant use them because the function is locked for the US-market
-Sound design for pops and bangs when downshifting. Only for Petrol cars and needs a non stock exhaust (straight piped,x-pipe,resonator delete or something like that) for noticeable effect. For AMG cars noticeable even with stock exhaust.
-Head unit design change from papyrus to silver design
-Enable DRL to light up with the headlights.
-Brighter DRL lights,parking lights,license plate lights ect.
-Set start stop eco to last mode. Meaning it will only activate it self after engine start if you left it on "on" the last time.
-Remaining fuel in liters or gallons
-Earlier parking sensor beeping (already at the yellow lights instead of the red lights).
-Disable seat belt warning and the message about how many seatbelts are worn in the back seats.
-One touch function for memory seats instead of keeping the button pressed
-Unlock trailer hitch
-Set AC to hot country mode (more power and faster cooling)
-More powerful seat cooling and depends on the car also hotter seat heating
only with NTG5.1 late 2015/2016:
-Unlock carplay/Android auto
-Unlock power dials
-Unlock AMG boot logo
-Change animated car to AMG car
-Codings for retrofits. Like lets say for example you replace your manual foldable mirrors with automatic foldable mirrors they need to be coded to work right.
And lot of other stuff i probably forgot to mention
I can code this for lot of mercedes models not just the W212. Just write me wich mercedes model series you have like W204,W221,A/C 207,W205,W213 ect. ect.If you are interessted please send me a private message.
Last edited by brfatal; Dec 7, 2023 at 11:53 AM.
He has good reviews.
My only issue was he sent me an angry text when I said I was going to make a video on how to flash carplay for everyone for free like all my videos.
The irony is he doesn't know how to do carplay either, he subs it out to another guy.
And two, I literally taught him how to code ILS for free, and he is making money on that info he learned for me.
I have no issue with that part, what I do have issue is somebody telling me I can't post a how-to video... Especially when it's the same person that has benefited so much from me financially without even a single acknowledgment or thank you.
He's reputable and has tons of reviews. He quoted me $220 for ILS+ last year.
I am one of Vlad module users and the cluster is updated - same type of "Intell Light Syst" message we see in this thread etc.
Comin from Audi world and the kind of coding etc you are exploring is something I'm very comfortable doing. If you had done this 4 years I ago,I would definitely have done this versus used Vlad's module.




He has good reviews.
My only issue was he sent me an angry text when I said I was going to make a video on how to flash carplay for everyone for free like all my videos.
The irony is he doesn't know how to do carplay either, he subs it out to another guy.
And two, I literally taught him how to code ILS for free, and he is making money on that info he learned for me.
I have no issue with that part, what I do have issue is somebody telling me I can't post a how-to video... Especially when it's the same person that has benefited so much from me financially without even a single acknowledgment or thank you.
that said let me know if you wana do mu irl and how much.
Last edited by berti_00; Dec 8, 2023 at 11:47 AM.
The Best of Mercedes & AMG
Vediamo can do so many things, including bricking your car! You at your own risk, No responsibility is assumed
https://youtu.be/VSFKcG4i_wQ
CGW231
2.VCD_02_global_variant_coding
Intelligente Fernlichtsteuerung "turn off"
Intelligente Fernlichtsteuerung Plus "Turn on"
perform Hard Reset
IGW212(NOTE: this is only for distronic PLUS equipped cars. module doesn't exist on others)
1 5.VCD_EVC_CfgBit_65_96
28 INTELLIGENT HEADLIGHT CONTROL PLUS (IHC+) "turn ON"
608 INTELLIGENT HEADLIGHT CONTROL "Turn OFF"
2 6.VCD_EVC_CfgList_01_0C
Headlamp Style 640 HEADLIGHT UNIT LED W DYNAMIC LIGHT SYSTEM SAE RHT change to "642 HEADLIGHT UNIT LED W DYNAMIC LIGHT SYSTEM ECE RHT"
perform Hard Reset
IC204
5. VCD_05_VariantenkodierungIntelligent Light System (ILS_Available) "Turn ON"
6.VCD_06_MenueaktivierungIntelligent Light System (Menu_ILS) "Turn ON"
perform Hard Reset
HLI-FL212 and HLI_FR212
3.VCD_Fahrzeugdatensatz_Allgemein Daten3 212M ILS SAE Change to "212M ILS ECE RV"
4.VCD_Fahrzeugdatensatz_Autobahnlicht Daten 4 nicht aktiv change to "aktiv Fzg mit ALA Hella"
5.VCD_Fahrzeugdatensatz_Erweitertes_Nebellicht Daten 5 nicht aktiv change to "aktiv Fzg mit ALA"
8.VCD_Fahrzeugdatensatz_IHC Daten 8 IHC aktiv Hella change to "IHC plus aktiv Hella"
9.VCD_Fahrzeugdatensatz_LDC Daten 9 212M ILS SAE change to "212M ILS ECE"
10.VCD_Fahrzeugdatensatz_LUC Daten 11 "?" --thats before) change to "212M ILS ece"
14.VCD_Schrittmotorparameter_ALA Daten 16 Hella VarioLED SAE change to "Hella VarioLED ECE"
16.VCD_Schrittmotorparameter_VLA Daten 18 "?" --thats before) change to "Aktorvariante Hella Haltestrom 1"
perform Hard Reset (I did soft function and hard physical)
SMPC212 OR MMPC212
Soft Reset on(whichever one you have)
ILS in action:
https://youtu.be/AdOEZ5QlExE
im not sure which module caused them to turn off. Is there a specific coding change that disables the side markers?




im not sure which module caused them to turn off. Is there a specific coding change that disables the side markers?
The Side Marker settings are into the HLI_212 left and Right modules in this domain:
Domain: Fahrzeugdatensatz LUC Schreiben
You can load the original US Fahrzeugdatensatz LUC Schreiben values and test if the EU ILS will still be OK and if not you can manually try to find the correct Channel number for SM_b ( as well from original US values )
PLUC_LCU_Ch(x)_SM_b
So, if the US setting where Sidemarker works good with "ON" for Channel 2 ( for example) : PLUC_LCU_Ch2_SM_b - On, you can try the same channel over the EU setting for Domain: Fahrzeugdatensatz LUC Entwickler Schreiben
The Domain: Fahrzeugdatensatz LUC Schreiben is explicit translated on Domain: Fahrzeugdatensatz LUC Entwickler Schreiben -
Entwickler is "developer"
Domain: Fahrzeugdatensatz LUC Schreiben
You can load the original US Fahrzeugdatensatz LUC Schreiben values and test if the EU ILS will still be OK and if not you can manually try to find the correct Channel number for SM_b ( as well from original US values )
PLUC_LCU_Ch(x)_SM_b
So, if the US setting where Sidemarker works good with "ON" for Channel 2 ( for example) : PLUC_LCU_Ch2_SM_b - On, you can try the same channel over the EU setting for Domain: Fahrzeugdatensatz LUC Entwickler Schreiben
The Domain: Fahrzeugdatensatz LUC Schreiben is explicit translated on Domain: Fahrzeugdatensatz LUC Entwickler Schreiben -
Entwickler is "developer"
These are my options. I just left it on the default setting.
I noticed that ILS doesn't seem to be working on this headlight. The left headlight ILS works great. The right headlight seems to be doing its normal auto on/off high beam.
When there's an oncoming car it just turns high beam off. Same when following a car. the left headlight actually moves the high beam around vehicles. The right just turns high beam off entirely.
Last edited by Black-w212; Mar 2, 2026 at 03:53 AM.




Its a US model headlight but almost everything was coded EU already and it doesnt seem to be working with ILS. The photo i attatched is the option thats different from the guide. Should I have selected a different option?




I did my own multifunction camera calibration and nothing changed. Its still misplacing vehicles to the right. Very rarely it will correctly identify vehicles but 90% of the time it thinks they're to the right.
Does anyone know what could be causing this? I cant figure out why it's no longer working.




https://mbworld.org/forums/e-class-w...ml#post9273123
You did not continue troubleshooting although the information received was complete.
https://mbworld.org/forums/e-class-w...ml#post9273123
You did not continue troubleshooting although the information received was complete.
The real issue is that the car thinks everything is to the right of where it really is. Its causing it to shine the high beam at vehicles instead of away from them.




