Mark this thread as Unsold
Feeler: FS or FT, Forged Carbon Fiber Wheels
#1
Member
Thread Starter
Join Date: May 2010
Location: Washington, D.C.
Posts: 100
Likes: 0
Received 1 Like
on
1 Post
C63 AMG (P31)
Feeler: FS or FT, Forged Carbon Fiber Wheels
These are 360 Forged's SL10's with the Carbon Fiber Face, Gloss Black Windows, Palladium silver paint matched inner and outer barells.
I am not sure of the offsets, but these wheels were made for a 2009 C63.
Had them since last summer, so they are less than a year old.
They do have some rubbing issues though in the rear when you turn sharp corners or if go over a bump too fast.
The offsets were not too great with the C63 and would advise you to get new lips to change the offsets in the back a little.
There are many nicks and clear coat issues as well as a curb rash on one of the front wheels.
Basically debating whether or not I should refinish them through B.Gorman on this forum, or just try to sell or trade them for pretty much dirt cheap and get them off my hands.
Paid a little over $5,000 for these but make me an offer.
I'm really just trying to get rid of them so...
No low ballers please![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
Open to trades as well. Wheels, performance parts, whatever you got for a W204 C63 (Anything that fits a W204 C63, or will fit with some adjustments)
Let me know![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Thanks for viewing.
Attached is the invoice and some pics.
I am not sure of the offsets, but these wheels were made for a 2009 C63.
Had them since last summer, so they are less than a year old.
They do have some rubbing issues though in the rear when you turn sharp corners or if go over a bump too fast.
The offsets were not too great with the C63 and would advise you to get new lips to change the offsets in the back a little.
There are many nicks and clear coat issues as well as a curb rash on one of the front wheels.
Basically debating whether or not I should refinish them through B.Gorman on this forum, or just try to sell or trade them for pretty much dirt cheap and get them off my hands.
Paid a little over $5,000 for these but make me an offer.
I'm really just trying to get rid of them so...
No low ballers please
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
Open to trades as well. Wheels, performance parts, whatever you got for a W204 C63 (Anything that fits a W204 C63, or will fit with some adjustments)
Let me know
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Thanks for viewing.
Attached is the invoice and some pics.
Last edited by ayowhatup; 02-27-2011 at 11:45 PM.
#2
Member
Thread Starter
Join Date: May 2010
Location: Washington, D.C.
Posts: 100
Likes: 0
Received 1 Like
on
1 Post
C63 AMG (P31)
My email is ayowhatup@gmail.com so feel free to contact me.
More detailed pics will be sent upon request from serious inquiries.
More detailed pics will be sent upon request from serious inquiries.
#5
Member
Thread Starter
Join Date: May 2010
Location: Washington, D.C.
Posts: 100
Likes: 0
Received 1 Like
on
1 Post
C63 AMG (P31)
I have taken the Invoice off since it had my address and personal information on it.
Anyone local that might want to take a look of it is more than welcome to.
The fronts are 8.5"x20"
The rears are 10"x20"
I called 360 Forged but I guess they do not let out offset information?
I asked them for it but they said they couldn't lol
Did a little measurment myself, seems like the rears are around 54~57 with a little less than a 2.5 inch lip in the rears.
I haven't washed the front wheels yet so I'll post the info for those once I get a chance.
Once again thanks guys.
Anyone local that might want to take a look of it is more than welcome to.
The fronts are 8.5"x20"
The rears are 10"x20"
I called 360 Forged but I guess they do not let out offset information?
I asked them for it but they said they couldn't lol
Did a little measurment myself, seems like the rears are around 54~57 with a little less than a 2.5 inch lip in the rears.
I haven't washed the front wheels yet so I'll post the info for those once I get a chance.
Once again thanks guys.