maxwerks

Well there they are the famous ADV.1 wheels 10DC Deep Concave wheels in 20 staggered 20x9.5-20x11.5 NO TIRES ( tires already removed now ) and YES they are actually that wide and they have a perfect fit ..SL and CLS fitment , if you know these wheels then you know what they are and they tend to be on the aggressive side .. they are black gloss lips, powder coated centers matt black , wheels are 9.5/10 , I am going in a different direction , the picture shown even though its from the ADV1 site , the wheels are the exact same ones used for the photo shoot ... I am asking $2400 plus shipping OBO ( But please be reasonable ) I am in Miami FL ,
If seriously interested please use email instead of PM as much as possible
Attached Thumbnails

maxwerks

Wheels are off the car now , tires off .... wheels being cleaned and checked by my wheel outfit to make sure they are perfect . will post pictures of wheels alone soon but I think most interested people know what they look like !

maxwerks

PLEASE , no PM , emaili is much easier for me ... it is max@maxwerks.com , also , I Thought $2400 is a very good deal I wish I paid that ...so please be reasonable in your offers you know what these go for , and these are as close to spotless as can be .

efx1

do you have the exact offset for fronts and rears

might fit my A5

maxwerks

I dont have the offsets and unlike HRE ADV do not stamp the offsets ... I can however measure the backset ( back spacing ) for you , plus the widths of course which is 10.5" Fronts / 12.5" rears . They are quite aggressive but beautifully flush on my CLS never had any rubbing car is lowered via Renntech module I am afraid I know nothing of the A5 fitment

maxwerks

- backspacing for the wheels is as follows:
- Fronts " measure " 10.5" wide with 6.25" backspacing , 4.25 front spacing
- Rears measure 12.5" wide with 7.25 backspace and 5.25 front spacing
so the projection of the wheel to a flush fitment with body is 4.25 over the hub in the front and 5.25 in the rear..they are of course hubcentric so no need for any mod or spacers what so ever

efx1

your original post 20x11.5????

im currently running 20x11 all around with 28 offset




now you saying 12.5 rears

too wide

maxwerks

The physical measurement of any wheel is always 1" wider than the spec .. an 8x20 wheels measures 9" wide , 9x20 measure 10" and so on . My rears are 11.5 x20 measuring 12.5" with a tape measure , I did that to measure the backspacing and front spacing ...thats why backspacing and real widths is more accurate than offsets AGAIN MY WHEELS are 20x11.5 rears

efx1

if you can get the actual offset for these wheels from ADV1 would be more helpful in selling the wheels

tasho3

Love these. Considering I would need to buy tires, it puts them out of my budged. GLWS

maxwerks

Yes it would be helpful ,, but ADV is the only company who doesnt list offsets ..
THese wheels were made specifically for the CLS , and given how aggressive they are it is easy to figure out that they wont fit anything BUT the w219 and R230 since these are the only cars with such low offsets . Backspacing and actual widths shows what the offsets are right away , Fronts 9.5X20 ET25.4 and rears are 11.5x20 ET25.4 ....

Thank you all , Wheels are sold .

jnolte

sold? or still for sale?

rrsupercharged

I'd be surprised if it's still for sale.....the post is practically a year old .