AMG bumper - clips to hold mesh grilles?
#1
MBWorld Fanatic!
Thread Starter
Join Date: Nov 2003
Location: Fresno, CA
Posts: 4,278
Likes: 0
Received 0 Likes
on
0 Posts
'09 A4 S Line
AMG bumper - clips to hold mesh grilles?
I'm trying to locate a part number for the clips that hold the mesh grilles in place on the AMG bumper. I was told by my bodyshop that the bumper does not come with these clips and they do not have a part number for them. I called my local parts department and they are no help. Does anyone have a part number for the clips? Also, should the bumper come with the clips already in place and my shop is just fulla ****?
#2
I no longer have the receipt, but I just bought four clips that hold the fog light mesh grill on a C32. I just asked for these clips and the parts guy brought them right out. They were .68 or .86 each.
#3
MBWorld Fanatic!
Thread Starter
Join Date: Nov 2003
Location: Fresno, CA
Posts: 4,278
Likes: 0
Received 0 Likes
on
0 Posts
'09 A4 S Line
Originally Posted by smgC32
I no longer have the receipt, but I just bought four clips that hold the fog light mesh grill on a C32. I just asked for these clips and the parts guy brought them right out. They were .68 or .86 each.
#4
Super Moderator
They clip into the bumper and then the mesh locks into them. I bought a handfull for my CL55 becuase if your not carefull when you remove the mesh you break them. You need to press back the locking tab before the mesh releases.
If the C32 uses the same clips as my CL55 bumper, the part # is : A 002 988 5181
If the C32 uses the same clips as my CL55 bumper, the part # is : A 002 988 5181
The following users liked this post:
purplecat001 (06-07-2016)
#5
MBWorld Fanatic!
Thread Starter
Join Date: Nov 2003
Location: Fresno, CA
Posts: 4,278
Likes: 0
Received 0 Likes
on
0 Posts
'09 A4 S Line
Originally Posted by awiner
They clip into the bumper and then the mesh locks into them. I bought a handfull for my CL55 becuase if your not carefull when you remove the mesh you break them. You need to press back the locking tab before the mesh releases.
If the C32 uses the same clips as my CL55 bumper, the part # is : A 002 988 5181
If the C32 uses the same clips as my CL55 bumper, the part # is : A 002 988 5181
#7
MBWorld Fanatic!
Thread Starter
Join Date: Nov 2003
Location: Fresno, CA
Posts: 4,278
Likes: 0
Received 0 Likes
on
0 Posts
'09 A4 S Line
Originally Posted by mj50
ooh blake... collecting pieces little by little...
Trending Topics
The following users liked this post:
purplecat001 (06-07-2016)
#13
How do you take the old ones out? Seems like the only viable choice is to tap them out with a drill? Is that safe/right? Pulling them out with a flat screwdriver just made it worse...
#14
Senior Member
Join Date: Aug 2010
Location: Ontario, Canada
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
2002 C32 AMG
I just bought these clips from the dealer. At first they asked for $9.50 for one!!! Eventually, I talked them down to $4.30 each because I'm an auto parts retailer. That is still a HUGE rip off.
#15
I just got 5 of them for $14.90USD at the Mercedes dealer in Foothill Ranch, CA. I did end up having to tap out the two upper ones with a drill as they were stuck in there pretty good, but the lower ones came out easy with a set of needlenose pliers.