Changing engine mounts in a 2000 E430. WOW!
#1
Member
Thread Starter
Join Date: Jun 2005
Location: Huntsville Alabama
Posts: 138
Likes: 0
Received 2 Likes
on
2 Posts
'00 E430, '83 Porsche 928S
Changing engine mounts in a 2000 E430. WOW!
There were a couple of recall items on my car, so I visited the dealer last week. They performed the recall items and recommended that I get new engine mounts and new lower control arm bushings. Dealer Quote: $400 +/- for the mounts and $600 +/- for the bushings.
I had changed out the lower control arm bushings on my 97 W210 and that job was a real PITA and I did not immediately recognize anthing different driving the car. I figured I would wait a little while and maybe change them this Winter.
I checked on the engine mounts and I could purchase them online for $139 shipped to my door. I decided to do them myself and save the $260+ dollars for something else for my car. I am so happy that I did this one myself. From jacking up the car to washing my hands was 1 hour. Yes! 1 HOUR for both mounts! I would not call myselft a skilled mechanic either. The only tools that I needed were 1) floor jack 2) 2 jack stands 3) metric socket set with extensions 4) set of metric open end wrenches.
I got in the car and started it up. It was amazing! The car was whisper quiet again. I though my starter was ready to fail on me until tonight. The grunt it used to make is GONE. An occasional clicking noise from the front passenger side at low speeds-GONE. My car just passed 80K miles and it sounds like a new one again.
The mounts were completely collapsed and the driver side had separated. In all accounts, this was the best $139 I have ever spent on any mercedes I have ever owned.
I had changed out the lower control arm bushings on my 97 W210 and that job was a real PITA and I did not immediately recognize anthing different driving the car. I figured I would wait a little while and maybe change them this Winter.
I checked on the engine mounts and I could purchase them online for $139 shipped to my door. I decided to do them myself and save the $260+ dollars for something else for my car. I am so happy that I did this one myself. From jacking up the car to washing my hands was 1 hour. Yes! 1 HOUR for both mounts! I would not call myselft a skilled mechanic either. The only tools that I needed were 1) floor jack 2) 2 jack stands 3) metric socket set with extensions 4) set of metric open end wrenches.
I got in the car and started it up. It was amazing! The car was whisper quiet again. I though my starter was ready to fail on me until tonight. The grunt it used to make is GONE. An occasional clicking noise from the front passenger side at low speeds-GONE. My car just passed 80K miles and it sounds like a new one again.
The mounts were completely collapsed and the driver side had separated. In all accounts, this was the best $139 I have ever spent on any mercedes I have ever owned.
The following users liked this post:
davmil2002 (04-26-2024)
#2
Member
Join Date: Aug 2003
Location: California
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
1997 E420, 1983 300D
i agree - i had new mounts put in my 97, and it took awhile for me to get used to knowing whether or not the car was running! at stoplights, the steering wheel has no vibration, whereas before it would shake. i wish i had tried to tackle the job myself though - i think i spent close to $500 for the job. i was just visualizing an engine hoist being involved somehow.
#5
Member
Thread Starter
Join Date: Jun 2005
Location: Huntsville Alabama
Posts: 138
Likes: 0
Received 2 Likes
on
2 Posts
'00 E430, '83 Porsche 928S
Originally Posted by benzmodz
Did you at least get the torque settings from the dealer ?
#6
Member
Thread Starter
Join Date: Jun 2005
Location: Huntsville Alabama
Posts: 138
Likes: 0
Received 2 Likes
on
2 Posts
'00 E430, '83 Porsche 928S
Originally Posted by ccmbduong
I am concerned that engine mounts need to be replaced after 5 years. What kind of quality is that. My '87 Camry does not need engine mounts yet. Amazing quality
Maybe you should find a forum for '87 camrys and discuss it with someone who cares.
#7
Super Member
Join Date: Jul 2003
Location: Mansfield, TX
Posts: 693
Likes: 0
Received 1 Like
on
1 Post
11 ML350W2 / 17 GLC300
There is a big difference in engine mounts that the word quality does not address. If you used a new Camery or Pinto type of engine mount in a W210, it would provide results similar to a well worn MB mount. There is really no way to compare one brand of car to another. The 2 series Volvo was notorious for destroying the passenger side front mount because the oil filter was right above it and the heat would fry the mount assuming you didn't spill hot oil on it to soften it first. Rubber items in the engine compartment do break down and need to be replaced.
Trending Topics
#9
Member
Thread Starter
Join Date: Jun 2005
Location: Huntsville Alabama
Posts: 138
Likes: 0
Received 2 Likes
on
2 Posts
'00 E430, '83 Porsche 928S
Originally Posted by BlownV8
How about a detailed write-up on the procedure?
I unhooked the battery as a safety precaution.
Remove the plastic cover under the engine.
I loosened the the lower bolt on the passenger side engine mount using a ratchet with a 6" extension. I think it was 13mm head socket.
I used the ratchet with no extension to loosen the top bolt on the motor mount (it was either a 15mm or 16mm head).
After the bolts were loose, I placed my jack under the oil pan (with a nice block of wood to eliminate any damage) and jacked up the engine about 2 1/2 inches. The passenger side engine mount came out very easily.
I placed the new engine mount in its spot (you have to line up the lower bolt hole and the cross member). I started the lower bolt with a couple turns. I lined up the mount in the correct orientation by lining up the locator tab on the top of the mount with the slot in the engine bracket. I lowered the engine by about an inch. I got the top bolt started and then ratcheted both bolts down till I got resistance. I lowered the engine to rest and then tightened both bolts.
I did the same process on the drivers side.
1 side at a time worked well for me. I am sure that both sides could be done simultaneously.
I put the plastic cover on the underside of the engine. I took the car off the jack stands. I hooked up the battery.
I started the car and entered my radio code and the job was finished.
#10
Member
Join Date: Aug 2003
Location: California
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
1997 E420, 1983 300D
That was a brain dead shot at the 210 to say that a Camry doesn't need new mounts. Your '87 camry cannot be compared to a W210. It probably won't need to have the self dimming rear view mirror fixed either - CAUSE IT DON'T GOT ONE. You see, mercedes engineers spent years designing hydraulic engine mounts to give the 210 a silent, vibration free cabin - not rubber and not just a bolt. Most hydraulic components sag over time, and need to be replaced. This is a repair you may not have to make on every vehicle on the road today - but if you're pissed about having to make a repair like this, then you shouldn't be driving a Mercedes.
#11
Senior Member
Join Date: Feb 2005
Location: Salinas, CA (831)
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
2007 E550
Got Mine done about a month ago and I noticed a big difference, no more vibration or shaking or noise, can hardly tell my car is running, one of my motor mounts were actually broken in two, meaning when I hit the gas the motor would jump, good thing it was not broken for long so there was no other damage.
#13
Member
Thread Starter
Join Date: Jun 2005
Location: Huntsville Alabama
Posts: 138
Likes: 0
Received 2 Likes
on
2 Posts
'00 E430, '83 Porsche 928S
Originally Posted by E43
Ala-benz, where did you purchase your engine mounts? I am about ready for a set myself.
#15
Replacing E430 Motor Mounts.
I need to replace the motor mounts in my 2000 E430 base model. Are both motor mounts the same? Or is there a distinct difference, to where there should be a left part# and a right part#? Does anyone have the Mercedes part number or numbers? Thanks
#21
Former Vendor of MBWorld
Join Date: Dec 2013
Location: Wadsworth, Ohio
Posts: 3,044
Likes: 0
Received 5 Likes
on
5 Posts
2012 SLS AMG
I have the engine mounts and transmission mount for your 2000 E430 available HERE, or you can get to them by clicking on the photo of the engine mount or transmission mount below.
If there is any more information we can provide, please feel free to post or send a PM!
#22
Please help
There were a couple of recall items on my car, so I visited the dealer last week. They performed the recall items and recommended that I get new engine mounts and new lower control arm bushings. Dealer Quote: $400 +/- for the mounts and $600 +/- for the bushings.
I had changed out the lower control arm bushings on my 97 W210 and that job was a real PITA and I did not immediately recognize anthing different driving the car. I figured I would wait a little while and maybe change them this Winter.
I checked on the engine mounts and I could purchase them online for $139 shipped to my door. I decided to do them myself and save the $260+ dollars for something else for my car. I am so happy that I did this one myself. From jacking up the car to washing my hands was 1 hour. Yes! 1 HOUR for both mounts! I would not call myselft a skilled mechanic either. The only tools that I needed were 1) floor jack 2) 2 jack stands 3) metric socket set with extensions 4) set of metric open end wrenches.
I got in the car and started it up. It was amazing! The car was whisper quiet again. I though my starter was ready to fail on me until tonight. The grunt it used to make is GONE. An occasional clicking noise from the front passenger side at low speeds-GONE. My car just passed 80K miles and it sounds like a new one again.
The mounts were completely collapsed and the driver side had separated. In all accounts, this was the best $139 I have ever spent on any mercedes I have ever owned.
I had changed out the lower control arm bushings on my 97 W210 and that job was a real PITA and I did not immediately recognize anthing different driving the car. I figured I would wait a little while and maybe change them this Winter.
I checked on the engine mounts and I could purchase them online for $139 shipped to my door. I decided to do them myself and save the $260+ dollars for something else for my car. I am so happy that I did this one myself. From jacking up the car to washing my hands was 1 hour. Yes! 1 HOUR for both mounts! I would not call myselft a skilled mechanic either. The only tools that I needed were 1) floor jack 2) 2 jack stands 3) metric socket set with extensions 4) set of metric open end wrenches.
I got in the car and started it up. It was amazing! The car was whisper quiet again. I though my starter was ready to fail on me until tonight. The grunt it used to make is GONE. An occasional clicking noise from the front passenger side at low speeds-GONE. My car just passed 80K miles and it sounds like a new one again.
The mounts were completely collapsed and the driver side had separated. In all accounts, this was the best $139 I have ever spent on any mercedes I have ever owned.
#23
Please help
There were a couple of recall items on my car, so I visited the dealer last week. They performed the recall items and recommended that I get new engine mounts and new lower control arm bushings. Dealer Quote: $400 +/- for the mounts and $600 +/- for the bushings.
I had changed out the lower control arm bushings on my 97 W210 and that job was a real PITA and I did not immediately recognize anthing different driving the car. I figured I would wait a little while and maybe change them this Winter.
I checked on the engine mounts and I could purchase them online for $139 shipped to my door. I decided to do them myself and save the $260+ dollars for something else for my car. I am so happy that I did this one myself. From jacking up the car to washing my hands was 1 hour. Yes! 1 HOUR for both mounts! I would not call myselft a skilled mechanic either. The only tools that I needed were 1) floor jack 2) 2 jack stands 3) metric socket set with extensions 4) set of metric open end wrenches.
I got in the car and started it up. It was amazing! The car was whisper quiet again. I though my starter was ready to fail on me until tonight. The grunt it used to make is GONE. An occasional clicking noise from the front passenger side at low speeds-GONE. My car just passed 80K miles and it sounds like a new one again.
The mounts were completely collapsed and the driver side had separated. In all accounts, this was the best $139 I have ever spent on any mercedes I have ever owned.
I had changed out the lower control arm bushings on my 97 W210 and that job was a real PITA and I did not immediately recognize anthing different driving the car. I figured I would wait a little while and maybe change them this Winter.
I checked on the engine mounts and I could purchase them online for $139 shipped to my door. I decided to do them myself and save the $260+ dollars for something else for my car. I am so happy that I did this one myself. From jacking up the car to washing my hands was 1 hour. Yes! 1 HOUR for both mounts! I would not call myselft a skilled mechanic either. The only tools that I needed were 1) floor jack 2) 2 jack stands 3) metric socket set with extensions 4) set of metric open end wrenches.
I got in the car and started it up. It was amazing! The car was whisper quiet again. I though my starter was ready to fail on me until tonight. The grunt it used to make is GONE. An occasional clicking noise from the front passenger side at low speeds-GONE. My car just passed 80K miles and it sounds like a new one again.
The mounts were completely collapsed and the driver side had separated. In all accounts, this was the best $139 I have ever spent on any mercedes I have ever owned.