- Mercedes Benz E Class AMG: How to Replace Door Handle
Step by step instructions for do-it-yourself repairs
Door Handle Replacement DIY
today was the day for working on the benz
TTM Scoops
Black Grille
Door Handle
Someone should do a write up on the TTM scoops.
They are not clear cut as the others make them out to be.
1. line up the scoops as they would look 'installed'
2. mark a spot using a pencil, I used my a small drillbit to start a hole
3. remove the scoop
4. drill the hole using a small bit to break through the metal (I broke two small drillbits doing this) there are a few layers of metal in there, I then opened up the hole using a 3/4" bit and it worked fine
5. put the two rubber hose pieces on the tubing behind the scoops to keep them from rubbing/banging
6. assemble the scoop
b. then scoop
c. then rubber spacer
d. then the mount on the car (that you just drilled)
e. then the locknut underneath note: I put the locknut underneath just in case it would work loose - the locknut will just fall off instead of getting sucked into the INTAKE!
Last edited by Toadster; Apr 8, 2012 at 12:36 AM.
Last edited by djrabbi; Apr 14, 2012 at 07:25 PM.
The Best of Mercedes & AMG
pics for comparison

Last edited by xpl0sive; Apr 15, 2012 at 12:09 AM.
Hopefully one of the other guys can advise better.




also, does anyone know of a good shop in the NY/NJ/PA area that can do retrofits of command units and other upgrades?
thanks











