Wow!! Holy brake job quote!!
Wow!! Has anyone done this job? Not to crazy about it, considering my current brakes squeak like crazy! Not sure if I want new brakes that squeak!
quote me for $5k
bought evosport rotors same thing wear out
to escape the trouble get brembo GT kit .
yes its expansive` but really worth it
http://www.parts.com/parts/2010/MERC...omponent=ROTOR
As soon as my car hit 39,000 kms i took my car in and got a full brake job done free of charge.
Not sure if the same offer was extended out to the '10's
http://www.parts.com/parts/2010/MERC...omponent=ROTOR




R.K.
As soon as my car hit 39,000 kms i took my car in and got a full brake job done free of charge.
Not sure if the same offer was extended out to the '10's
Trending Topics
The Best of Mercedes & AMG
As soon as my car hit 39,000 kms i took my car in and got a full brake job done free of charge.
Not sure if the same offer was extended out to the '10's
http://www.mercedes-benz.ca/content/.../warranty.html
You have to drive really hard, or hit up a few track days, to wear out the brakes in that period. But ya, free replacements.
You can get Evosport, ACG or Benzworks 2 piece rotors for alot cheaper.
Around $4,000 cheaper then what the stealership is charging you.
+1
That would cost a **** load!! Then again CC rotors have 4 times the life of iron rotors.
Last edited by _AMG_; May 3, 2012 at 03:06 PM.
~Have to pay to play unfortunately.
Wow!! Has anyone done this job? Not to crazy about it, considering my current brakes squeak like crazy! Not sure if I want new brakes that squeak!
Find a good indy to do it. It's not rocket science. Be happy you don't own a Porsche with ceramic brakes. Rotors and Pads, just the parts, cost $20k.
Last edited by DuaneC63; May 3, 2012 at 04:19 PM.




No I'm in Edmonton, Alberta. Sorry I can't help you. I buy all my stuff from Greg at www.oediscountparts.com; 18008492765. They ship to Canada.
R.K.

OP:
I can pretty much guarantee you don't need new rotors. Its the performance package two piece rotors that make the brake job insanely expensive.
I got the same quote give or take a few hund on my brakes... So I took the wheels off and measured the rotors with a caliper myself and there was only 1mm on wear with 50K km on them. They are good for 3mmor so of wear. The min thickness is stamped right on them.
I bought new pads (Porterfield RS4) from formymercedes.com and had them installed. They work great. I've used them at the track and they worked well out there too. No squealing and no dust.
But if your rotors are warped and the brake is pulsing this wont work, you will need to have the rotors machined first if there is enough meat.
Brake job total cost: $420
I literally did my front pads & rotors just yesterday and although I`m sure I could have held off for another 5K if I really really wanted to, I figured I already got 70K out of them, I may as well replace them now. And contrary to what others have said about MB dealerships wanting to stick it to us, my indy shop confirmed that my fronts were done after they pulled them off the car. And no, my indy shop did not sell me anything because I brought all my own rotors & pads.
Which brings me to the OP`s question. I do not have the 2-pc rotors so I was able to bring the cost down significantly by ordering my rotors through getmercedesparts.com. Like someone else mentioned in this thread - $127 per rotor! Brake pad wear sensor ran me $15 and I went aftermarket on the pads, opting for Racing Brake ET500 pads at $230 for the front set. Total cost breakdown:
Rotors & sensor - $340 shipped
Front pads - $230 shipped
Labour (indy shop) - $140
FYI, replacing the rotors on the C63 is no different from any other car so that quote you got from that dealer is still very high - go to a reputable indy shop, I`m pretty sure you`ll save $200 - $300 on labour.
I'm a tech and i have a 09 C63 and some of these dealers in Toronto are insane. At my shop i would have to charge you like $150 for the install just because it's not my shop (the owner does have to pay bills), but at my house or yours it would be FREE my friend. You'll see and learn how easy it is to do brakes on these cars and the next time you might even try it yourself.
Peter
I'm a tech and i have a 09 C63 and some of these dealers in Toronto are insane. At my shop i would have to charge you like $150 for the install just because it's not my shop (the owner does have to pay bills), but at my house or yours it would be FREE my friend. You'll see and learn how easy it is to do brakes on these cars and the next time you might even try it yourself.
Peter
Maybe we can do a 'learn from a tech' session lol
. That would be a good idea....maybe even record it for the DIY guys on this forum.




