Jun 9, 2015, 04:19 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
- Mercedes-Benz E-Class: Recalls and Technical Service Bulletins
Important information to help you understand your Mercedes-Benz
W211 Recalls!
Member
Joined: May 2007
Posts: 156
Likes: 10
From: Toronto,Canada
17 E43, 18 GLE400
I think I have the same problem but the dealer said the 2 lower balljoint was worn and making the noise and were replaced under warranty.
However the problem / noise still exist and I am in Toronto, Canada so I need something a little more specific so I can show it to my dealer and have them check that again!
Thank you very much in advance!
Thread Starter
Out Of Control!!
Joined: Jul 2003
Posts: 15,901
Likes: 4,632
From: North Scottsdale, AZ
'71 Pinto
Senior Member
Joined: Nov 2007
Posts: 431
Likes: 64
From: Delray Beach, Fl
GLC SUV 350e4 Verde Silver Metallic
Just in time - thanks
Thanks for posting - Putting it to the test. I took delivery last week of my 2005 from the dealer and just emailed the salesman to see what has or has not been done. It will be very interesting to see what comes back. The dealership already failed the "certified check list" Were a some mirror things but the big one - the stop light bar on the truck was not working when they delivered the car. Have had no comments from the "delivery survey". 
Thread Starter
Out Of Control!!
Joined: Jul 2003
Posts: 15,901
Likes: 4,632
From: North Scottsdale, AZ
'71 Pinto
P-B-42.46/84 NOV07 SBC or battery fault message displayed in instrument cluster
211.026/065/070/076/265/276 VIN range A040665 up to A589444
211.082/083/282/283 VIN range X097815 up to X161341
This may be the result of damage to the engine or interior compartment wiring harness in the area of the auxiliary battery. The interior compartment wiring harness contains the supply line for the auxiliary battery relay. The engine and/or interior compartment wiring harness will be replaced.
P-B-07.16/80 NOV07 - 211.022/026 fuel loss at the pressure regulator valve (PRV) and/or poor engine running characteristics (shakes, knocks, surges, changes to limp mode, poor output, poor fuel economy, combustion noise) this may be caused by a malfunction at the PRV due to improper installation. The entire rail will be replaced; PRVs cannot be replaced individually due to possible imprecise installation processes in the workshop.
211.026/065/070/076/265/276 VIN range A040665 up to A589444
211.082/083/282/283 VIN range X097815 up to X161341
This may be the result of damage to the engine or interior compartment wiring harness in the area of the auxiliary battery. The interior compartment wiring harness contains the supply line for the auxiliary battery relay. The engine and/or interior compartment wiring harness will be replaced.
P-B-07.16/80 NOV07 - 211.022/026 fuel loss at the pressure regulator valve (PRV) and/or poor engine running characteristics (shakes, knocks, surges, changes to limp mode, poor output, poor fuel economy, combustion noise) this may be caused by a malfunction at the PRV due to improper installation. The entire rail will be replaced; PRVs cannot be replaced individually due to possible imprecise installation processes in the workshop.
Last edited by konigstiger; Dec 18, 2007 at 03:37 PM.
MBWorld Fanatic!
Joined: Dec 2003
Posts: 1,917
Likes: 14
From: Torquay, England
E-class E300e Estate, Sprinter (stretched limo)
Thanks very much indeed for the excellent information. Is this just a TSB or a more serious recall?Thanks again
Regards
John from a very cold, dark, Torquay
Last edited by glojo; Dec 18, 2007 at 03:50 PM.
Thread Starter
Out Of Control!!
Joined: Jul 2003
Posts: 15,901
Likes: 4,632
From: North Scottsdale, AZ
'71 Pinto
MB World Stories
The Best of Mercedes & AMG
6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)
Verdad Gallardo
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
Junior Member
Joined: Aug 2005
Posts: 23
Likes: 3
From: Northern NJ
2019 E450 4Matic, 2018 E400 Coupe
Service Campaign 2007-100004
I just received a letter from my dealer regarding this recall. They mentioned that my 2006 4Matic may require the replacement of the transfer case. First, they have to remove the rear engine cover and check the serial number of the transfer case. If the serial number of the transfer case falls within a certain range, it will have to be replaced.
Anyone else receive this notice and/or have any info on this recall?
Thanks and Best Wishes for the Holiday Season.
Steve
Anyone else receive this notice and/or have any info on this recall?
Thanks and Best Wishes for the Holiday Season.
Steve
Thread Starter
Out Of Control!!
Joined: Jul 2003
Posts: 15,901
Likes: 4,632
From: North Scottsdale, AZ
'71 Pinto
I just received a letter from my dealer regarding this recall. They mentioned that my 2006 4Matic may require the replacement of the transfer case. First, they have to remove the rear engine cover and check the serial number of the transfer case. If the serial number of the transfer case falls within a certain range, it will have to be replaced.
Anyone else receive this notice and/or have any info on this recall?
Thanks and Best Wishes for the Holiday Season.
Steve
Anyone else receive this notice and/or have any info on this recall?
Thanks and Best Wishes for the Holiday Season.
Steve
Thread Starter
Out Of Control!!
Joined: Jul 2003
Posts: 15,901
Likes: 4,632
From: North Scottsdale, AZ
'71 Pinto
Service Campaign 2007100004 DEC07 approximately 8,327 vehicles affected: 2005 and 2006 211 and 220 4MATIC; transfer case serial number range between 115925 and 137342 – optimized transfer cases will reduce vibrations when cornering or when parking. Have your dealer check VMI to see if your vehicle is included.
Steve, PM your email address if you want a copy.
Steve, PM your email address if you want a copy.
Senior Member
Joined: Mar 2007
Posts: 315
Likes: 0
From: Los Angeles
CLS
Wow,
I don't even own a W211 yet but what a great help konigstiger is!
Tell me Mr Konigstiger with your infinite wisdom when looking for a 2003-2005 E320 or E500 with 30-50k miles which is a better car overall? They seem to be priced about the same. What I really want is a E320 Sport or E500 for the airmatic.
Thanks in advance.
Sleep
I don't even own a W211 yet but what a great help konigstiger is!
Tell me Mr Konigstiger with your infinite wisdom when looking for a 2003-2005 E320 or E500 with 30-50k miles which is a better car overall? They seem to be priced about the same. What I really want is a E320 Sport or E500 for the airmatic.
Thanks in advance.
Sleep
Thread Starter
Out Of Control!!
Joined: Jul 2003
Posts: 15,901
Likes: 4,632
From: North Scottsdale, AZ
'71 Pinto
“Mr. Konigstiger”? An aristocrat, anyway I would suggest you start a new thread with your question to get accurate hands-on feedback from those who own the model(s) of interest.
Junior Member
Joined: Dec 2007
Posts: 18
Likes: 1
2015 S550
Thread Starter
Out Of Control!!
Joined: Jul 2003
Posts: 15,901
Likes: 4,632
From: North Scottsdale, AZ
'71 Pinto
My 03 E320 just starting making a "thud" sound at low speeds on the passenger side front when I go over imperfections in the road. I am glad to see this possible solution. I'm due for my service in a few weeks and will have my dealer check it out then. Thanks for the post and the information!!!! It was driving me crazy
MBWorld Fanatic!
Joined: Apr 2006
Posts: 8,137
Likes: 26
From: Maryland
Eurocharged 2004 E500, Eurocharged ECU/TCU 2005 SL600, 2010 Caddy SwaggerWagon
My 03 E320 just starting making a "thud" sound at low speeds on the passenger side front when I go over imperfections in the road. I am glad to see this possible solution. I'm due for my service in a few weeks and will have my dealer check it out then. Thanks for the post and the information!!!! It was driving me crazy
Bargained my dealer down to 650.00 including parts.
https://mbworld.org/forums/showthrea...ghlight=thrust
Senior Member
Joined: Aug 2004
Posts: 440
Likes: 44
From: Oakland, CA
2014 E350 Estate Wagon 4Matic
Hey Konigstiger, regarding this:
I just took in my w211 2004 wagon (produced oct 2003) in for service and submitted the campaign number to the service rep. He didn't look up the number, but instead looked up the list of recalls, etc that come up with the vin number and said there weren't any open service bulletins. This one service campaign (2007010004 MAR07) was not on the list. Does that mean that my car doesn't need it? or is there some place they can check to see if it applies to my car? Sometimes my car's exhaust seems rough and I wonder if this is the problem...
Service Campaign 2007010004 MAR07 – Models 211, 219, 221, 230, X164 (M273 engine, 550) Check intake manifold and replace if necessary; Install updated engine control module software. Running characteristics can be improved with the installation of a modified intake manifold. Additionally, updated engine control software will also be installed. Approximately 11,352 vehicles affected.
Manifold production date up to and including SEPT 30 2005, replace manifold.
Manifold production date between (and including) OCT 1 2005 and FEB 28 2006, install engine control module software.
Manifold production date up to and including SEPT 30 2005, replace manifold.
Manifold production date between (and including) OCT 1 2005 and FEB 28 2006, install engine control module software.
Last edited by hecdog; Jan 6, 2008 at 03:22 PM.
Thread Starter
Out Of Control!!
Joined: Jul 2003
Posts: 15,901
Likes: 4,632
From: North Scottsdale, AZ
'71 Pinto
I just took in my w211 2004 wagon (produced oct 2003) in for service and submitted the campaign number to the service rep. He didn't look up the number, but instead looked up the list of recalls, etc that come up with the vin number and said there weren't any open service bulletins. This one service campaign (2007010004 MAR07) was not on the list. Does that mean that my car doesn't need it? Sometimes my car's exhaust seems rough and I wonder if this is the problem...
Junior Member
Joined: Dec 2007
Posts: 18
Likes: 1
2015 S550
Just had this happen to my car. Replace passenger ball joint, thrust arm and thrust arm bearing.
Bargained my dealer down to 650.00 including parts.
https://mbworld.org/forums/showthrea...ghlight=thrust
Bargained my dealer down to 650.00 including parts.
https://mbworld.org/forums/showthrea...ghlight=thrust
Thread Starter
Out Of Control!!
Joined: Jul 2003
Posts: 15,901
Likes: 4,632
From: North Scottsdale, AZ
'71 Pinto
Service Campaign 2008010001 JAN08 - MY04 and 05 models 203, 209, 211, 215, 230 the inner funnel material of the catalytic converter on affected vehicles may warp causing noise. Dealers will check the production date on the catalytic converter and replace if found to be between 2/1/04 and 4/30/04. Approximately 6597 vehicles affected.
This applies even if you are out of warranty! If you want a copy that includes instruction on how to check the date PM your email address.
This applies even if you are out of warranty! If you want a copy that includes instruction on how to check the date PM your email address.
Last edited by konigstiger; Jan 20, 2008 at 08:01 PM.
Member
Joined: Aug 2007
Posts: 121
Likes: 0
From: Las Vegas
E500
Service Campaign at MB Authorized service?
Read through and didn't see if the work must be done by a MB dealer or could it be done at any MB authorized service center? Got my car from a dealership that is authorized in MB, BMW etc.. I can call and check too but thought it could be good for the thread. Always great info.
konigstiger for president 2008
konigstiger for president 2008
Thread Starter
Out Of Control!!
Joined: Jul 2003
Posts: 15,901
Likes: 4,632
From: North Scottsdale, AZ
'71 Pinto
Read through and didn't see if the work must be done by a MB dealer or could it be done at any MB authorized service center? Got my car from a dealership that is authorized in MB, BMW etc.. I can call and check too but thought it could be good for the thread. Always great info.
MBWorld Fanatic!
Joined: May 2007
Posts: 1,252
Likes: 18
From: Blaine, WA
07 E320 Bluetec
Bluetec Campaign ???
My SA called me yesterday to come in for a couple of parts replacement. He said it was some exhaust flow thing or something, a new Campaign. I took it in today, they spent about 45 minutes while I waited. I asked the SA again; this time he said it was the two intake housings. Oh..OK. I was in a hurry and left.
At home I looked under the hood and engine cover. I could not tell what they replaced; I mean the car has always been spotless under the hood.
I would love to know if anyone knows about this new Campaign and details.
At home I looked under the hood and engine cover. I could not tell what they replaced; I mean the car has always been spotless under the hood.
I would love to know if anyone knows about this new Campaign and details.
MBWorld Fanatic!
Joined: May 2007
Posts: 1,252
Likes: 18
From: Blaine, WA
07 E320 Bluetec
My SA called me yesterday to come in for a couple of parts replacement. He said it was some exhaust flow thing or something, a new Campaign. I took it in today, they spent about 45 minutes while I waited. I asked the SA again; this time he said it was the two intake housings. Oh..OK. I was in a hurry and left.
At home I looked under the hood and engine cover. I could not tell what they replaced; I mean the car has always been spotless under the hood.
I would love to know if anyone knows about this new Campaign and details.
At home I looked under the hood and engine cover. I could not tell what they replaced; I mean the car has always been spotless under the hood.
I would love to know if anyone knows about this new Campaign and details.
When I took a closer look in bright sunshine today, I found the intake manifold clamp screws obviously had been removed and reinstalled; they had socket marks on the edges; they may have replaced the intake manifold.
