C250 CGI Coupe planning to get 300hp

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 12-04-2017, 11:48 AM
  #1  
Newbie
Thread Starter
 
ilyasbuyuklu's Avatar
 
Join Date: Dec 2017
Posts: 8
Likes: 0
Received 1 Like on 1 Post
C250cgi coupe
C250 CGI Coupe planning to get 300hp

Hello guys
i new to forums i have opened this thread because i am going to upgrade my c250cgi coupe to get 300hp from it..
I will share all upgrades,costs and also pictures and dyno charts,problems etc..
here is the list to make it done
- original turbo upgrade (turbo dymanics limited UK)
- Vath bigger intercooler
- Vath downpipe
- custom race mufflers (i will order special custom build my local muffler shop istanbul)
- if they accept Vath remmap or i will find someone to get custom remmap done
- upgraded clutch
- Vath limited slip diff.

i hope i can success and share all information with you guys..
some people think why not to sell my car and get c63 amg here is the answer :
i live in istanbul turkey high tax rates with high tax fuel prices and hi tax engine taxes we have here
c63 is 330.000 euro here and because of its engine is big every year have to pay 11.000 euros for engine tax
but c250cgi is 30.000 euro here and engine tax is 600 euro per year..

thank you and if you have any knowledge about this car you might share with me
thank you
Old 12-04-2017, 08:06 PM
  #2  
Newbie
Thread Starter
 
ilyasbuyuklu's Avatar
 
Join Date: Dec 2017
Posts: 8
Likes: 0
Received 1 Like on 1 Post
C250cgi coupe
Guys found out that c250 engine uses IHI RHF4 (japan manufacturer brand ) turbo and possible to get compressor wheel upgraded easly..

Planning to get %6 more air probably gains 20-30whp and with good remmap car can do more than 300hp with intercooler and down pipe and exhaust system..the problem is pistons might not handle that much power but i will also figure that out..first i will send the turbos for compressor wheel upgrade and get it done..

thanks
Old 12-18-2017, 10:33 PM
  #3  
Former Vendor of MBWorld
 
Narry's Avatar
 
Join Date: Oct 2014
Location: hongkong Shenzhen
Posts: 152
Likes: 0
Received 2 Likes on 2 Posts
C260
Smile

Originally Posted by ilyasbuyuklu
Hello guys
i new to forums i have opened this thread because i am going to upgrade my c250cgi coupe to get 300hp from it..
I will share all upgrades,costs and also pictures and dyno charts,problems etc..
here is the list to make it done
- original turbo upgrade (turbo dymanics limited UK)
- Vath bigger intercooler
- Vath downpipe
- custom race mufflers (i will order special custom build my local muffler shop istanbul)
- if they accept Vath remmap or i will find someone to get custom remmap done
- upgraded clutch
- Vath limited slip diff.

i hope i can success and share all information with you guys..
some people think why not to sell my car and get c63 amg here is the answer :
i live in istanbul turkey high tax rates with high tax fuel prices and hi tax engine taxes we have here
c63 is 330.000 euro here and because of its engine is big every year have to pay 11.000 euros for engine tax
but c250cgi is 30.000 euro here and engine tax is 600 euro per year..

thank you and if you have any knowledge about this car you might share with me
thank you
hi
you can check this link'http://ttsauto.eu/index.php?route=information/news&news_id=21
we have every mods possible in c250 by the way I also own the same car
we have hybrid turbo 300 ps
intercooler upgrades turbo muffler
everything what is possible we have also 4 channel pro tune box only box which can adjust fuel rail pressure important if you make exhaust upgrades also turbo soloniod valve
narry
Old 12-23-2017, 03:14 PM
  #4  
Newbie
 
Adrian Patuto's Avatar
 
Join Date: Dec 2017
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
C250




Originally Posted by ilyasbuyuklu
Hello guys
i new to forums i have opened this thread because i am going to upgrade my c250cgi coupe to get 300hp from it..
I will share all upgrades,costs and also pictures and dyno charts,problems etc..
here is the list to make it done
- original turbo upgrade (turbo dymanics limited UK)
- Vath bigger intercooler
- Vath downpipe
- custom race mufflers (i will order special custom build my local muffler shop istanbul)
- if they accept Vath remmap or i will find someone to get custom remmap done
- upgraded clutch
- Vath limited slip diff.

i hope i can success and share all information with you guys..
some people think why not to sell my car and get c63 amg here is the answer :
i live in istanbul turkey high tax rates with high tax fuel prices and hi tax engine taxes we have here
c63 is 330.000 euro here and because of its engine is big every year have to pay 11.000 euros for engine tax
but c250cgi is 30.000 euro here and engine tax is 600 euro per year..

thank you and if you have any knowledge about this car you might share with me
thank you
​​​​​​​ I have a 2013 C250 cgi, iv had a c63 507 edition hood, and sourced an OEM c63 quad exists and engineered it to fit removed second cat and had a xpipe to fit, now got a stage 1 cold air from burger Motorsport and had remapped ecu. Running no lag now. Runs hard but want to see if you found much difference in swapping out the clutch ? I need to get down pipes and wasn’t sure about the inter cooler as it will only add a slight gain.
Old 12-23-2017, 07:22 PM
  #5  
Newbie
 
Adrian Patuto's Avatar
 
Join Date: Dec 2017
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
C250
Also if u found a clutch replacement to suite can u please provide me with the link. Finding it hard to locate anywhere that does for this model
Old 12-24-2017, 03:13 AM
  #6  
Former Vendor of MBWorld
 
Narry's Avatar
 
Join Date: Oct 2014
Location: hongkong Shenzhen
Posts: 152
Likes: 0
Received 2 Likes on 2 Posts
C260
Originally Posted by Adrian Patuto
Also if u found a clutch replacement to suite can u please provide me with the link. Finding it hard to locate anywhere that does for this model
hi this automatic transmission or manual transmission auto have a torque converter
narry
Old 12-24-2017, 10:08 AM
  #7  
Newbie
Thread Starter
 
ilyasbuyuklu's Avatar
 
Join Date: Dec 2017
Posts: 8
Likes: 0
Received 1 Like on 1 Post
C250cgi coupe
Originally Posted by Adrian Patuto





I have a 2013 C250 cgi, iv had a c63 507 edition hood, and sourced an OEM c63 quad exists and engineered it to fit removed second cat and had a xpipe to fit, now got a stage 1 cold air from burger Motorsport and had remapped ecu. Running no lag now. Runs hard but want to see if you found much difference in swapping out the clutch ? I need to get down pipes and wasn’t sure about the inter cooler as it will only add a slight gain.
nice car i am also planning to get c63 amg hood but original doesnt fit how did you manage to do it could you explain ?
getting chip is good but getting turbo upgrade is huge power and works perfect with upgraded intercooler and downpipes because when you upgraded turbo, %5 more air turbo produce so getting bigger intercooler and downpipes helps engine and turbo to get more air and makes it much cooler than original

i am not sure if it need clutch or not we will see it when i got everything done.will it slip or not we will see
Old 12-24-2017, 10:12 AM
  #8  
Newbie
Thread Starter
 
ilyasbuyuklu's Avatar
 
Join Date: Dec 2017
Posts: 8
Likes: 0
Received 1 Like on 1 Post
C250cgi coupe
Originally Posted by Narry
hi
you can check this link'http://ttsauto.eu/index.php?route=information/news&news_id=21
we have every mods possible in c250 by the way I also own the same car
we have hybrid turbo 300 ps
intercooler upgrades turbo muffler
everything what is possible we have also 4 channel pro tune box only box which can adjust fuel rail pressure important if you make exhaust upgrades also turbo soloniod valve
narry
nice work done could you share some dyno charts ?
and price pls ? And where is this shop located ?
Old 12-24-2017, 10:43 AM
  #9  
Former Vendor of MBWorld
 
Narry's Avatar
 
Join Date: Oct 2014
Location: hongkong Shenzhen
Posts: 152
Likes: 0
Received 2 Likes on 2 Posts
C260
Smile

Originally Posted by ilyasbuyuklu
nice work done could you share some dyno charts ?
and price pls ? And where is this shop located ?
hi
we are located in hongkong mainland china Thailand and india
sure can share dyno
http://www.caranddriver.com/features...-lying-feature
check this article
kindly arrange this dyno for me
narry
Old 12-30-2017, 08:52 AM
  #10  
Newbie
 
Seigedan's Avatar
 
Join Date: Dec 2017
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
E250
Interested in your 4ch tuning box

U
Originally Posted by Narry
hi
you can check this link'http://ttsauto.eu/index.php?route=information/news&news_id=21
we have every mods possible in c250 by the way I also own the same car
we have hybrid turbo 300 ps
intercooler upgrades turbo muffler
everything what is possible we have also 4 channel pro tune box only box which can adjust fuel rail pressure important if you make exhaust upgrades also turbo soloniod valve
narry
Hi Narry,
im interested to find out more about your self make tuning box, how can I contact you? My email is dan.sbw@gmail.com

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: C250 CGI Coupe planning to get 300hp



All times are GMT -4. The time now is 02:23 AM.