View Poll Results: exhaust for sound,looks & finish
remus
5
20.00%
supersprint
20
80.00%
Voters: 25. You may not vote on this poll
Member
Quote:




Screens were painted black shortly after on the car though...
EDIT:Here is a pic silversdm3 took a WHILE back of the front...
Originally Posted by LorinserCClass




Screens were painted black shortly after on the car though...
EDIT:Here is a pic silversdm3 took a WHILE back of the front...
It looks awsome with the roof black..it looks like you have a Pano roof..and the fenders are very nice aswell..great great job...i am a hardcore fan of the white Benz..this is my fourth White one....
MBWorld Fanatic!
Did you notice a horsepower/torque decrease in increasing the diameter of the pipe?
Is that straight pipe as well [both resinators deleted]?
I'm getting my 2x83 Race on Weds [should be] and trying to figure out to keep resinator or not. do straight pipe... or increase all around straight pipe to 2.5"
Is that straight pipe as well [both resinators deleted]?
I'm getting my 2x83 Race on Weds [should be] and trying to figure out to keep resinator or not. do straight pipe... or increase all around straight pipe to 2.5"
MBWorld Fanatic!
Quote:
Is that straight pipe as well [both resinators deleted]?
I'm getting my 2x83 Race on Weds [should be] and trying to figure out to keep resinator or not. do straight pipe... or increase all around straight pipe to 2.5"
put it on with the resonator, its LOUD. if you dont like it, you can always take the res off.Originally Posted by BadAssC230k
Did you notice a horsepower/torque decrease in increasing the diameter of the pipe?Is that straight pipe as well [both resinators deleted]?
I'm getting my 2x83 Race on Weds [should be] and trying to figure out to keep resinator or not. do straight pipe... or increase all around straight pipe to 2.5"
i took a video today right before i took off my eisenmann:

MBWorld Fanatic!
Quote:
i took a video today right before i took off my eisenmann:
Rlee,Originally Posted by rlee02135
put it on with the resonator, its LOUD. if you dont like it, you can always take the res off.i took a video today right before i took off my eisenmann:
How much for the exhaust installation? Did you cut your bumper for the tips? Can any muffler shops do the cutting or do I have to go somewhere else?
Thanks
MBWorld Fanatic!
Quote:
How much for the exhaust installation? Did you cut your bumper for the tips? Can any muffler shops do the cutting or do I have to go somewhere else?
Thanks
i actually uninstalled it today. Originally Posted by coin
Rlee,How much for the exhaust installation? Did you cut your bumper for the tips? Can any muffler shops do the cutting or do I have to go somewhere else?
Thanks
first time to install, it cost $40. cut off stock muffler and clamp this one on
this time, to uninstall, it cost $60. he had to take off the old clamp with a torch gun. than clamp old muffler back on.
miss my eisenmann

MBWorld Fanatic!
Quote:
first time to install, it cost $40. cut off stock muffler and clamp this one on
this time, to uninstall, it cost $60. he had to take off the old clamp with a torch gun. than clamp old muffler back on.
miss my eisenmann
You should just keep your car and use the extra money to mod it even further Originally Posted by rlee02135
i actually uninstalled it today. first time to install, it cost $40. cut off stock muffler and clamp this one on
this time, to uninstall, it cost $60. he had to take off the old clamp with a torch gun. than clamp old muffler back on.
miss my eisenmann
...From your sig, your rear bumper seemed uncut but I thought we have to do the cutting in order for the tips to fit?
MBWorld Fanatic!
Quote:
...
From your sig, your rear bumper seemed uncut but I thought we have to do the cutting in order for the tips to fit?
correct, i did not cut the bumper. i had my exhaust touching the bumper for 5K miles and it was fine, no melting. the reason i did this was to prevent scraping.Originally Posted by coin
You should just keep your car and use the extra money to mod it even further
...From your sig, your rear bumper seemed uncut but I thought we have to do the cutting in order for the tips to fit?
im getting rid of the car to move to the e46 world
after a supercharger and some other mods, i will smoke c32s and c55s 
MB World Stories
The Best of Mercedes & AMG
ExploreMBWorld Fanatic!
Quote:
i took a video today right before i took off my eisenmann:
its louder WITH the stock resonator? Odd, I thought it would be louder without it. And why does yours sound diff than blazinpin0i's?Originally Posted by rlee02135
put it on with the resonator, its LOUD. if you dont like it, you can always take the res off.i took a video today right before i took off my eisenmann:
only thing i can think of... he had his mic'd closer?
ideally what you have is the sound im going for. very raspy and throaty with a little bite of a whine to it.
how did you run your exhaust? with or without resonator? by the sounds of it, with you doing it yourself, sounds like you had em both in there.
MBWorld Fanatic!
Quote:
only thing i can think of... he had his mic'd closer?
ideally what you have is the sound im going for. very raspy and throaty with a little bite of a whine to it.
how did you run your exhaust? with or without resonator? by the sounds of it, with you doing it yourself, sounds like you had em both in there.
i had the resonator on. when i took the video, it was windy..but trust me its LOUDOriginally Posted by BadAssC230k
its louder WITH the stock resonator? Odd, I thought it would be louder without it. And why does yours sound diff than blazinpin0i's?only thing i can think of... he had his mic'd closer?
ideally what you have is the sound im going for. very raspy and throaty with a little bite of a whine to it.
how did you run your exhaust? with or without resonator? by the sounds of it, with you doing it yourself, sounds like you had em both in there.
C240-Merc
Super Member
close
- Join DateMar 2005
- LocationHouston, Texas
- Posts:648
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive2017 G63 AMG, 2019 G550
-
Likes:100
-
Liked:5 Times in 5 Posts
Quote:
I thought it cost you only $337 as you stated earlier?? Originally Posted by advans
I ordered my REMUS for $488 at Mimousa.com
"I spit up only $337 for it"--from the first post.
C240-Merc
Super Member
close
- Join DateMar 2005
- LocationHouston, Texas
- Posts:648
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive2017 G63 AMG, 2019 G550
-
Likes:100
-
Liked:5 Times in 5 Posts
Quote:
If money is not an issue,there are catback systems specifically designed for your car. I drive a 2001 C240 and didn't want to spend that much money on a part where i can use the money elsewhere (ie. coilovers, wheels, etc.). So in the spirit of being frugal, i went to my muffler guy who's done all my work during my rice modding days. He pretty much knew i needed a muffler that was at least 18" long and had a right side inlet w/a middle outlet. So he was able to fashion together a nice Flowmaster exhaust w/dual tips. I left the resonator in the middle intact because the droning sound was already prominent in the cabin. At idle, it sounds great.. nice low buzzing noise and when i punch it, it does have a nice throaty sound... not some cheap lawnmower sounding high pitched squeal. I combined that by changing the stock dual paper filters w/K+N's, and i'm happy w/the results.
Flowmaster exhaust + dual tips + labor = $190
K+N's = $100 (need 2 of 'em)
Happy modding!
This is encouraging.Originally Posted by kenzobenzo
Hello,If money is not an issue,there are catback systems specifically designed for your car. I drive a 2001 C240 and didn't want to spend that much money on a part where i can use the money elsewhere (ie. coilovers, wheels, etc.). So in the spirit of being frugal, i went to my muffler guy who's done all my work during my rice modding days. He pretty much knew i needed a muffler that was at least 18" long and had a right side inlet w/a middle outlet. So he was able to fashion together a nice Flowmaster exhaust w/dual tips. I left the resonator in the middle intact because the droning sound was already prominent in the cabin. At idle, it sounds great.. nice low buzzing noise and when i punch it, it does have a nice throaty sound... not some cheap lawnmower sounding high pitched squeal. I combined that by changing the stock dual paper filters w/K+N's, and i'm happy w/the results.
Flowmaster exhaust + dual tips + labor = $190
K+N's = $100 (need 2 of 'em)
Happy modding!
Wat's the part/model number of the Flowmaster exhaust?
I am thinking of doing the samething as you did. Could you post pics and a sound clip of the exhaust.
Member
I love my Kleeman. Felt the power gain right at low rpm. (usually you dont feel much with just muffler upgrade). Looks good. The Sound is deep and throaty may be a little too loud for some people
I would highly recommend this exhaust.
I would highly recommend this exhaust.MBWorld Fanatic!
I bought an Eisenmann Race exhaust (thanks rlee02135!!) and got it installed yesterday, it sounds great but its sooooo loud!
I left the stock resonator installed since it is loud enough as it is. Anything I could do to quiet it down a little bit? Also does anyone know how many miles it takes before it is broken in because I read that it gets quieter after it's broken in?








I left the stock resonator installed since it is loud enough as it is. Anything I could do to quiet it down a little bit? Also does anyone know how many miles it takes before it is broken in because I read that it gets quieter after it's broken in?







MBWorld Fanatic!
looks great man
I dont know that It will quiet down.. Mine actually got louder after the break in period. lol
MBWorld Fanatic!
HECK YES! I just installed mine today as well. Race 2x83mm. OMFG! I love it. I can't wait for the other engine mods. I freaking love the note. So clean and crisp.
btw, congrats on yours!
btw, congrats on yours!
MBWorld Fanatic!
NICE!!!
but if its used by rlee, there would be no break in period!
but if its used by rlee, there would be no break in period!
MBWorld Fanatic!
Quote:
remus, I LOVE MY REMUS TOO!Originally Posted by mj50
i luv it... not too loud and deep tone...
btw, most aftermarket exhaust you find on this forum are compatable, like eisenmann exhaust, it says from C180-C320
just get the C32 AMG exhaust and remove your resonator u sound get a deeper tone not too loud
MBWorld Fanatic!
Quote:
I dont know that It will quiet down.. Mine actually got louder after the break in period. lol
haha, fack. 5,000 miles long enough for it to be broken in? I guess it is already broken in. well its extremely loud, i'm a little nervous every time i see a cop now, its so loud i'm afraid i will get thrown in jail. of course last night theres a cop that had someone pulled over near my apartment building and this morning i go to dunkin donuts and at the street corner a cop had one lane blocked off for an accident and when i come out a dunkin a state trooper pulled in the parking lot as i was leaving. (i waited for him to get inside before i drove away) rofl. Originally Posted by C24owner
looks great man
so if u wanna know how mine sounds i found a video at www.angrybenz.com, that guy has the same engine and exaust as me except hes got a coupe, sounds exactly the same though.
http://angrybenz.com/filme/ab_exhaust_eisenrace256.wmv
and heres some pics NO ONE ever takes... the old exhaust after it's removed:





so dirty!


MBWorld Fanatic!
Quote:
btw, congrats on yours!
thanks, grats to yours too! make sure the pipes don't touch the bumper lol, IT WILL MELT Originally Posted by BadAssC230k
HECK YES! I just installed mine today as well. Race 2x83mm. OMFG! I love it. I can't wait for the other engine mods. I freaking love the note. So clean and crisp. btw, congrats on yours!
lolMBWorld Fanatic!
I got clearance. I made sure of it. omg. i love the sound. thinking about removing the resinator though. hmmm, oh well. no biggie. so much better then nothing [stock pipe].
oh and the reason no one takes a pic of the stock pipe... its dead and there's no use for taking pics of... a... stock... pipe. haha
oh and the reason no one takes a pic of the stock pipe... its dead and there's no use for taking pics of... a... stock... pipe. haha
MBWorld Fanatic!
Quote:
oh and the reason no one takes a pic of the stock pipe... its dead and there's no use for taking pics of... a... stock... pipe. haha
is it really loud? like, so loud you could be mistaken for a trailer truck on the highway?Originally Posted by BadAssC230k
I got clearance. I made sure of it. omg. i love the sound. thinking about removing the resinator though. hmmm, oh well. no biggie. so much better then nothing [stock pipe].oh and the reason no one takes a pic of the stock pipe... its dead and there's no use for taking pics of... a... stock... pipe. haha
MBWorld Fanatic!
Nice job! perhaps think of putting another resonator on to quiet it down a bit.
MBWorld Fanatic!
Quote:
thanks. how? what kind? where would it go? i need details lol.Originally Posted by GDawgC220
Nice job! perhaps think of putting another resonator on to quiet it down a bit.







