M271 Gruppe-flip Intake Scoop (direct bolt-on) Fabrication
#1
MBWorld Fanatic!
Thread Starter
Join Date: Apr 2003
Location: Socal
Posts: 2,175
Likes: 0
Received 0 Likes
on
0 Posts
EVE
M271 Gruppe-flip Intake Scoop (direct bolt-on) Fabrication
Damn - before I get on this flight, just wanted to shoot out some installed pictures of my other project (took me 3 working weeks to produce). While I don't have much time to explain, I'm sure others will chime in on my behalf (the official unveiling was yesterday's Kwik-e-mart) about the fitment, quality and good looks of the final product:
Oh, yeah the airbox looks "funny" for a reason...it's another pending project that some of you were given a hint on. I bet ya'll can't wait for that one to be complete . Let's just say I'm doing what I can to improve our (M271s) intake systems.
Peace for a week!
flip
Oh, yeah the airbox looks "funny" for a reason...it's another pending project that some of you were given a hint on. I bet ya'll can't wait for that one to be complete . Let's just say I'm doing what I can to improve our (M271s) intake systems.
Peace for a week!
flip
#2
MBWorld Fanatic!
Thread Starter
Join Date: Apr 2003
Location: Socal
Posts: 2,175
Likes: 0
Received 0 Likes
on
0 Posts
EVE
More:
Don't worry, I've also heat tested the final product by doing multiple freeway runs ~90mph average . Looks, sounds, feels amazing :d.
take it easy!
Don't worry, I've also heat tested the final product by doing multiple freeway runs ~90mph average . Looks, sounds, feels amazing :d.
take it easy!
Trending Topics
#10
MBWorld Fanatic!
Join Date: Jul 2006
Location: SF East Bay
Posts: 1,255
Likes: 0
Received 0 Likes
on
0 Posts
"Double Stuff" SOLD | Nor*Cals "Pesky Audi"
did you feed the mouth of it to a dog? haha jk. you know what i think of it already, dont have to tell you a thousand times. Like i told you last week... definetly got my gears goin in me head.
have any side [left / right] pics of the install or bottom pics, uninstalled?
have any side [left / right] pics of the install or bottom pics, uninstalled?
#11
MBWorld Fanatic!
Join Date: May 2006
Location: Nor Cal
Posts: 1,369
Likes: 0
Received 0 Likes
on
0 Posts
06 c230 v6 SS
this goes back to the original, advans' take-off-your snorkle tube project hahaha
flip that shiat looks clean, good work
#12
MBWorld Fanatic!
Join Date: Jul 2005
Location: New York City
Posts: 7,424
Likes: 0
Received 3 Likes
on
2 Posts
C55 ///AMG, 535xi
I hope I can manage to design something that can have 2 of these ducts, but I dont have the time, and equipment to produce this!
#16
Moderator Alumni
So, after reading some really ridiculously long threads about the m271 intake and how the snorkel gets air from the other side, I thought that the whole point of channeling air from the other side and through a cloth pipe was to avoid getting excessive water into the intake. Does this not defeat that?
#17
Super Moderator Alumni
Join Date: Mar 2004
Location: West Los Angeles
Posts: 7,684
Likes: 0
Received 10 Likes
on
5 Posts
Midnight Blue 2004.5 C230 Kompressor Sport Sedan. 2002 w210 E320, 2009 w211 E350 Sport
So, after reading some really ridiculously long threads about the m271 intake and how the snorkel gets air from the other side, I thought that the whole point of channeling air from the other side and through a cloth pipe was to avoid getting excessive water into the intake. Does this not defeat that?
So, that being said, unless you live in an area that the water rises above the top portion of the grille, it should be okay.
#18
MBworld Guru
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 22,007
Likes: 0
Received 6 Likes
on
6 Posts
white and whiter
So, after reading some really ridiculously long threads about the m271 intake and how the snorkel gets air from the other side, I thought that the whole point of channeling air from the other side and through a cloth pipe was to avoid getting excessive water into the intake. Does this not defeat that?
#19
Moderator Alumni
I don't see how that would be an issue. The V6/8/12 all have ram-air intake. water are drained out from the bottom of the airbox. The 4 cyclinders are the only ones with the excessive intake tubing routed to the other side. The reason might've been "design" influenced than anything to give the engine bay a balanced look.
Anyways, I'm surprised something of the sort hasn't been created earlier :P Hopefully, it'll put down some numbers on the dyno for ya m271 nuts out there, cuz its a beauty to look it.
#21
Super Member
Join Date: Oct 2006
Location: Irvine/West Covina, CA
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
2007 C350 SS
#23
Senior Member
Join Date: Oct 2005
Location: NY
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
2016 C63s AMG
https://mbworld.org/forums/showthrea...m271+prototype
We should all thank Jose for this awesome mod. When I had my protoype on it did make a difference. I had an aluminm tube which held heat. This carbon fibor one looks great and holds back the heat.
I cant wait to see what esle he has in store for our M271 enigines!
THANK YOU JOSE!!