Picture of my Kleemann ring type pulley
#4
MBWorld Fanatic!
Join Date: Sep 2002
Location: Ohio
Posts: 3,145
Likes: 0
Received 0 Likes
on
0 Posts
2010 C300 4matic
My Kleemann alloy pulley rubs the water pump pulley too. The very edge of the belt is worn off a little bit. But I think it looks okay as long it doesn't get any worse. I think it has already worn off all it is going to. Just keep any eye on it.
#6
MBWorld Fanatic!
It's that tell tale thin ring of worn paint on the waterpump pulley. Like the ASP pulley, I don't think it rubs all the time, it's mainly on startup, once started it doesn't rub. It's a small price we pay for wanting the max power. I've watched mine really close over the past 5k miles and it's really nothing. The lastest ASP pulley will 100% not rub as Lee made it about 1/8" smaller, one advantage of making one pulley at a time.
Trending Topics
#8
MBWorld Fanatic!
Originally posted by 20FHK02
FYI, the water pump pulley is $28 in case someone wants to replace it.
FYI, the water pump pulley is $28 in case someone wants to replace it.
#12
MBWorld Fanatic!
Join Date: May 2002
Location: The blue white rock, third out.
Posts: 2,916
Likes: 0
Received 1 Like
on
1 Post
2002 C230 Coupe(M111)
Originally posted by kw230
good idea...
good idea...
#14
Former Vendor of MBWorld
ky230 do u feel a big difference with the pully?
also, will u be going to the track with it?
i am curious what someone gets in the 1/4 mile with the pully installed. i am not counting bullwinkle's 16.XX
also, will u be going to the track with it?
i am curious what someone gets in the 1/4 mile with the pully installed. i am not counting bullwinkle's 16.XX
#15
Member
Thread Starter
Join Date: Mar 2002
Location: Vancouver Canada
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
2002 Mercedes c230k 6 speed
I use the pulley to did over 10 autoX event and two track days, the ring still sitting nice and tight.
The 1/4 mile time i found is from G-tech, not in a drag race track
The 1/4 mile time i found is from G-tech, not in a drag race track
#16
MBWorld Fanatic!
Originally posted by BlackC230Coupe
i am curious what someone gets in the 1/4 mile with the pully installed. i am not counting bullwinkle's 16.XX
i am curious what someone gets in the 1/4 mile with the pully installed. i am not counting bullwinkle's 16.XX
#17
Former Vendor of MBWorld
Originally posted by Buellwinkle
Sure, but mine was on a real track
Sure, but mine was on a real track
#19
Former Vendor of MBWorld
Originally posted by Buellwinkle
No, not yet. Waiting for that intercooler so I can do it all at once.
No, not yet. Waiting for that intercooler so I can do it all at once.
#20
MBWorld Fanatic!
Yes, the Renncpe group buy special for $758. I think the group buy is over, you can call/pm/email Renncpe if you are interested. I'm expecting it this week. They should have shipped it last Friday.
#21
Former Vendor of MBWorld
Originally posted by Buellwinkle
Yes, the Renncpe group buy special for $758. I think the group buy is over, you can call/pm/email Renncpe if you are interested. I'm expecting it this week. They should have shipped it last Friday.
Yes, the Renncpe group buy special for $758. I think the group buy is over, you can call/pm/email Renncpe if you are interested. I'm expecting it this week. They should have shipped it last Friday.
was that $758.00 just for the intercooler? or was that for the chip to?
#22
MBWorld Fanatic!
From what I understand it will be $995 from Renntech and it's intercooler only, no chip. Is a chip even available? Haven't heard anything on that since Randy brought it up.
#23
Former Vendor of MBWorld
Originally posted by Buellwinkle
From what I understand it will be $995 from Renntech and it's intercooler only, no chip. Is a chip even available? Haven't heard anything on that since Randy brought it up.
From what I understand it will be $995 from Renntech and it's intercooler only, no chip. Is a chip even available? Haven't heard anything on that since Randy brought it up.
#25
Former Vendor of MBWorld
Originally posted by Buellwinkle
Well, don't keep us in suspense, how much is it? Where's the dyno?
Well, don't keep us in suspense, how much is it? Where's the dyno?
If i am remembering correctly he told me that the ECU reprograming and pully were around $2,400 i dont remember the exact price and i dont know the exact price of just the ECU reprogram. I think he told me if u have the pully and intercooler thats when it will actually give you the most HP. I think he said maybe 10-15hp from just the ECU reprograming with the other 2 mods.