Just Rollnnn.... evolution of another W203..
#276
MBWorld Fanatic!
I dont know how much better it is quality wise, but for keeping the heat out, you cant beat it. You should check out the heat test they do with the ceramic tint. Id totally recommend it for Florida. I havent done it yet, im still trying to decide if i want to tint, everyone tells me not to. Now that summer has past, i might wait awhile..
BTW...Back in college, I used to roll in a GMC Jimmy with 1 JBL 18"...I used up the whole back...I "built" an enclosure from the inside with the sub firing down...
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
![crazy](https://mbworld.org/forums/images/smilies/crazy.gif)
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
Jon (by way of Manila)
#277
MBWorld Fanatic!
Join Date: Oct 2007
Location: SF Bay Area, San Diego
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
C320 coupe
Im driving to work this morning on the 710 heading north when a piece of metal pops up and gets thrown in front of me, this is some bull****!!!!!
![](http://img179.imageshack.us/img179/235/cflipdent.jpg)
sorry for the blurry blackberry pic..
It took 2 chunks out of my front lip, the big one is about 3/4 of an inch wide and 1/4 inch deep.... I didnt really check it out too much, since i was already running late, so hopefully it didn't do any other damage....
![](http://img179.imageshack.us/img179/235/cflipdent.jpg)
sorry for the blurry blackberry pic..
It took 2 chunks out of my front lip, the big one is about 3/4 of an inch wide and 1/4 inch deep.... I didnt really check it out too much, since i was already running late, so hopefully it didn't do any other damage....
![action](https://mbworld.org/forums/images/smilies/action1.gif)
#278
Super Member
Join Date: Sep 2006
Location: Los Angeles, CA
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
05.C230K.SS
Im driving to work this morning on the 710 heading north when a piece of metal pops up and gets thrown in front of me, this is some bull****!!!!!
![](http://img179.imageshack.us/img179/235/cflipdent.jpg)
sorry for the blurry blackberry pic..
It took 2 chunks out of my front lip, the big one is about 3/4 of an inch wide and 1/4 inch deep.... I didnt really check it out too much, since i was already running late, so hopefully it didn't do any other damage....
![](http://img179.imageshack.us/img179/235/cflipdent.jpg)
sorry for the blurry blackberry pic..
It took 2 chunks out of my front lip, the big one is about 3/4 of an inch wide and 1/4 inch deep.... I didnt really check it out too much, since i was already running late, so hopefully it didn't do any other damage....
ouch, that sucks roland.
if it makes you feel any better, I installed my cf front lip last night at a friends place, scratched it backing out of his driveway, and ended up curb rashing my 3 month old MRR wheels
![Mad](https://mbworld.org/forums/images/smilies/mad.gif)
![mercy](https://mbworld.org/forums/images/smilies/mecry.gif)
![Frown](https://mbworld.org/forums/images/smilies/frown.gif)
#279
MBWorld Fanatic!
![](http://www.freesmileys.org/smileys/smiley-angry021.gif)
Hey can you please tell me step by step how you put the lip. I still haven't put mine because I'm a little paranoid. I don't want it to fly off when i'm on the freeway. I heard screws and bolts should do the trick. Is that enough?
Thanks
#280
MBWorld Fanatic!
Join Date: Dec 2007
Location: Miami, FL
Posts: 1,237
Likes: 0
Received 1 Like
on
1 Post
C63 AMG(sold), 2009 CL550, 2010 S550 Majestic Black, 2010 ML550, 2006 C230, 2009 Venza
Damn, that sucks
. I remember when some idiot cut me off and I swerved and hit a curb.
Hey can you please tell me step by step how you put the lip. I still haven't put mine because I'm a little paranoid. I don't want it to fly off when i'm on the freeway. I heard screws and bolts should do the trick. Is that enough?
Thanks
![](http://www.freesmileys.org/smileys/smiley-angry021.gif)
Hey can you please tell me step by step how you put the lip. I still haven't put mine because I'm a little paranoid. I don't want it to fly off when i'm on the freeway. I heard screws and bolts should do the trick. Is that enough?
Thanks
#281
MBWorld Fanatic!
#282
Super Member
Join Date: Sep 2006
Location: Los Angeles, CA
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
05.C230K.SS
Damn, that sucks
. I remember when some idiot cut me off and I swerved and hit a curb.
Hey can you please tell me step by step how you put the lip. I still haven't put mine because I'm a little paranoid. I don't want it to fly off when i'm on the freeway. I heard screws and bolts should do the trick. Is that enough?
Thanks
![](http://www.freesmileys.org/smileys/smiley-angry021.gif)
Hey can you please tell me step by step how you put the lip. I still haven't put mine because I'm a little paranoid. I don't want it to fly off when i'm on the freeway. I heard screws and bolts should do the trick. Is that enough?
Thanks
long story man...
First attempt: to save money, i had my friend do it with me. first, we put 2 jack stands under the front end of the car...drill holes first on the lip...James (JL MOTORING) gave me 10 bolts, so i put 4 in the middle, and 3 on each side. then have 1 person hold the left side, 1 person hold the right side...and have one more person drill 4 holes in the middle first...then align the left and rights...I tried that, and unfortunately, it was sooooooooooooooooooo off that it was flimsy as ****...it was shifted to the left too much...i was surprised with all the freeway driving i did after the install it didnt fall off...
Second attempt: i went to the shop i worked at during summer. we put the car on the bay, and lifted the car all the way up...then it was sooooo easy to install cuz we were able to work over our heads, and we were able to filll in gaps behind the lip and see clearly if its perfect or not.
So long story short, get it installed professionally...itll probably be like, what 20-50 bucks? its better to do it right the first time...why? cuz after my first attempt my friend curbed the rim and i rubbed so much that one of my rear tires was turning in air, meaning my other rear tire was rubbing like no other...FAWK
so yeah sorry for the rant Karo...did you get it from James (JL MOTORING) or did you pay triple the price for the euroteck lip?
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
#283
Super Moderator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
I had mine professionally installed a loooong time ago and it's still intact and holding on strong. they told me that they didn't like the bolts that it came with, so they just use the same screws that come with the Hamann lips
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
(but, only four screws are holding it in place.)
#285
Senior Member
Join Date: Jul 2007
Location: Southern California
Posts: 354
Likes: 0
Received 1 Like
on
1 Post
2005 Mercedes Benz C230K SS
Could be worse Rollnnn... I lost mine on the fwy, along with my front bumper mesh! ![action](https://mbworld.org/forums/images/smilies/action1.gif)
![action](https://mbworld.org/forums/images/smilies/action1.gif)
Im driving to work this morning on the 710 heading north when a piece of metal pops up and gets thrown in front of me, this is some bull****!!!!!
![](http://img179.imageshack.us/img179/235/cflipdent.jpg)
sorry for the blurry blackberry pic..
It took 2 chunks out of my front lip, the big one is about 3/4 of an inch wide and 1/4 inch deep.... I didnt really check it out too much, since i was already running late, so hopefully it didn't do any other damage....
![](http://img179.imageshack.us/img179/235/cflipdent.jpg)
sorry for the blurry blackberry pic..
It took 2 chunks out of my front lip, the big one is about 3/4 of an inch wide and 1/4 inch deep.... I didnt really check it out too much, since i was already running late, so hopefully it didn't do any other damage....
#287
MBWorld Fanatic!
yo karo...
long story man...
First attempt: to save money, i had my friend do it with me. first, we put 2 jack stands under the front end of the car...drill holes first on the lip...James (JL MOTORING) gave me 10 bolts, so i put 4 in the middle, and 3 on each side. then have 1 person hold the left side, 1 person hold the right side...and have one more person drill 4 holes in the middle first...then align the left and rights...I tried that, and unfortunately, it was sooooooooooooooooooo off that it was flimsy as ****...it was shifted to the left too much...i was surprised with all the freeway driving i did after the install it didnt fall off...
Second attempt: i went to the shop i worked at during summer. we put the car on the bay, and lifted the car all the way up...then it was sooooo easy to install cuz we were able to work over our heads, and we were able to filll in gaps behind the lip and see clearly if its perfect or not.
So long story short, get it installed professionally...itll probably be like, what 20-50 bucks? its better to do it right the first time...why? cuz after my first attempt my friend curbed the rim and i rubbed so much that one of my rear tires was turning in air, meaning my other rear tire was rubbing like no other...FAWK
so yeah sorry for the rant Karo...did you get it from James (JL MOTORING) or did you pay triple the price for the euroteck lip?![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
long story man...
First attempt: to save money, i had my friend do it with me. first, we put 2 jack stands under the front end of the car...drill holes first on the lip...James (JL MOTORING) gave me 10 bolts, so i put 4 in the middle, and 3 on each side. then have 1 person hold the left side, 1 person hold the right side...and have one more person drill 4 holes in the middle first...then align the left and rights...I tried that, and unfortunately, it was sooooooooooooooooooo off that it was flimsy as ****...it was shifted to the left too much...i was surprised with all the freeway driving i did after the install it didnt fall off...
Second attempt: i went to the shop i worked at during summer. we put the car on the bay, and lifted the car all the way up...then it was sooooo easy to install cuz we were able to work over our heads, and we were able to filll in gaps behind the lip and see clearly if its perfect or not.
So long story short, get it installed professionally...itll probably be like, what 20-50 bucks? its better to do it right the first time...why? cuz after my first attempt my friend curbed the rim and i rubbed so much that one of my rear tires was turning in air, meaning my other rear tire was rubbing like no other...FAWK
so yeah sorry for the rant Karo...did you get it from James (JL MOTORING) or did you pay triple the price for the euroteck lip?
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
Or like you said I might just pay the 50 bucks and have a body shop put it on. I have heard soo many people lose their front lip on the freeway that I am worried. With my luck it might fly off and hit a cop
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
Thanks for the info
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#289
Out Of Control!!
Join Date: Nov 2005
Location: OC
Posts: 18,677
Likes: 0
Received 9 Likes
on
9 Posts
a quarter mile at a time
damn! 3?!
I had mine professionally installed a loooong time ago and it's still intact and holding on strong. they told me that they didn't like the bolts that it came with, so they just use the same screws that come with the Hamann lips
(but, only four screws are holding it in place.)
I had mine professionally installed a loooong time ago and it's still intact and holding on strong. they told me that they didn't like the bolts that it came with, so they just use the same screws that come with the Hamann lips
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
(but, only four screws are holding it in place.)
I installed mine myself using 10 1/4" bolts from Home depot. Used self locking nuts and washers on BOTH sides. You could do jumping jacks off of my lip......
Unfortunately I ran over a seat cushion in the middle of the road. Cracked my lip but it stayed on there.
Really nice job on the car Rollnnn!
#290
Super Member
Join Date: Sep 2006
Location: Los Angeles, CA
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
05.C230K.SS
Euroteck was wayyy to much. JL hooked it up. My fitment was ok (when I held it up). I was thinking to put some kind of clear silicon around the bumper and lip so Air doesn't get in between. What do you think?
Or like you said I might just pay the 50 bucks and have a body shop put it on. I have heard soo many people lose their front lip on the freeway that I am worried. With my luck it might fly off and hit a cop![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
Thanks for the info![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Or like you said I might just pay the 50 bucks and have a body shop put it on. I have heard soo many people lose their front lip on the freeway that I am worried. With my luck it might fly off and hit a cop
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
Thanks for the info
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#291
MBWorld Fanatic!
Seriously??
I installed mine myself using 10 1/4" bolts from Home depot. Used self locking nuts and washers on BOTH sides. You could do jumping jacks off of my lip......
Unfortunately I ran over a seat cushion in the middle of the road. Cracked my lip but it stayed on there.
Really nice job on the car Rollnnn!
I installed mine myself using 10 1/4" bolts from Home depot. Used self locking nuts and washers on BOTH sides. You could do jumping jacks off of my lip......
Unfortunately I ran over a seat cushion in the middle of the road. Cracked my lip but it stayed on there.
Really nice job on the car Rollnnn!
I'll give the screws and bolts combo and have my coworker (340 lbs) do jumping jacks on it. If it hold then we are golden
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
Thanks for the good info guys. I'm a little more confident now
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#293
Member
Join Date: Jun 2009
Location: vancouver, bc
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
2005 c320 4matic
#294
MBWorld Fanatic!
With my skinny *** (130 - 5'10) if I do it it might come off a 6'6 340lbs guys will salvage my damn car lool
Come to think of it....I was looking for an excuse to buy that Mars red C55 with Kleemann Supercharged for 28K
Come to think of it....I was looking for an excuse to buy that Mars red C55 with Kleemann Supercharged for 28K
![Roll Eyes (Sarcastic)](https://mbworld.org/forums/images/smilies/rolleyes.gif)
#295
Member
Join Date: Jun 2009
Location: vancouver, bc
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
2005 c320 4matic
i think its sold too. whoever bought it, LUCKY GUY
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
#298
MBWorld Fanatic!
Thread Starter
damn, didnt know we had so many problems with these lips... that sucks!! oh well i guess you gotta expect it being so low to the ground.. i checked out the damage again, and i guess its not as bad as it couldve been, you cant really notice it til you get up close so no worries. Luckily these things are only a couple hundred dollars on ebay...
I was driving on the 710 this morning going about 65 and again there was balled up tire tread in the middle of the lane. I broke pretty hard thinking i would just hit it at a slower speed, since i couldnt really move out of the way (too much traffic) I thought for sure it was gonna jack my lip... i guess im not as low as i thought.. good thing for once..
As for the screws, i have about 8 or 9 holding it, i did it myself which was pretty difficult lining it up, but its on there pretty solid..
I was driving on the 710 this morning going about 65 and again there was balled up tire tread in the middle of the lane. I broke pretty hard thinking i would just hit it at a slower speed, since i couldnt really move out of the way (too much traffic) I thought for sure it was gonna jack my lip... i guess im not as low as i thought.. good thing for once..
As for the screws, i have about 8 or 9 holding it, i did it myself which was pretty difficult lining it up, but its on there pretty solid..
#299
MBWorld Fanatic!
damn, didnt know we had so many problems with these lips... that sucks!! oh well i guess you gotta expect it being so low to the ground.. i checked out the damage again, and i guess its not as bad as it couldve been, you cant really notice it til you get up close so no worries. Luckily these things are only a couple hundred dollars on ebay...
I was driving on the 710 this morning going about 65 and again there was balled up tire tread in the middle of the lane. I broke pretty hard thinking i would just hit it at a slower speed, since i couldnt really move out of the way (too much traffic) I thought for sure it was gonna jack my lip... i guess im not as low as i thought.. good thing for once..
As for the screws, i have about 8 or 9 holding it, i did it myself which was pretty difficult lining it up, but its on there pretty solid..
I was driving on the 710 this morning going about 65 and again there was balled up tire tread in the middle of the lane. I broke pretty hard thinking i would just hit it at a slower speed, since i couldnt really move out of the way (too much traffic) I thought for sure it was gonna jack my lip... i guess im not as low as i thought.. good thing for once..
As for the screws, i have about 8 or 9 holding it, i did it myself which was pretty difficult lining it up, but its on there pretty solid..
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
Haha what a trip I was on the 405 and went over a piece of rubber and that thing shot up in the air loool
Thank god nothing happened to my tire.
I once ran over a tire and ruined my bumper. I was told it was due to hard braking. When you hard brake your car does a nose dive.
#300
MBWorld Fanatic!
Join Date: Sep 2005
Location: South Coast Metro/Cerritos/Yorba Linda California
Posts: 1,244
Likes: 0
Received 0 Likes
on
0 Posts
'05 C230K '10 GLK350 '13 SMART
just think of it as a Carbon fiber bumper guard ![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
I once messed mine up bad. The car in front of me kicked up a 2x4 and smacked the lip and crack the resin. End up getting in refinshed and smoked.
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
I once messed mine up bad. The car in front of me kicked up a 2x4 and smacked the lip and crack the resin. End up getting in refinshed and smoked.