<<< AMS M112 Big Bore Throttle Body >>>
#1
Former Vendor of MBWorld
Thread Starter
<<< AMS M112 Big Bore Throttle Body >>>
Hello everyone,
The AMS BBTB for the M112 engine is finally complete. Sorry for the delay but some finishing touches had to be done to the BBTB to make sure it was as close to perfect as we could make it. We went to great lengths for this big bore throttle body and we feel it will be a great addition to the M112 performance lineup. Benefits include more HP & TQ and improved engine sound as well. Greater benefits will be realized on more highly modded vehicles. We recommend doing BBTB if you have basic performance upgrades already on your vehicle. Specs:
Bore: 74mm (18% more surface area)
Plate: Mirror Polished & engraved
Price: $299 + $100 core (but discount available if purchased in addition to our M112 pulley)
And without further ado:
![](http://www.abedinmotorsports.com/bbtb/MBWbbtb1.jpg)
![](http://www.abedinmotorsports.com/bbtb/MBWbbtb2.jpg)
The AMS BBTB for the M112 engine is finally complete. Sorry for the delay but some finishing touches had to be done to the BBTB to make sure it was as close to perfect as we could make it. We went to great lengths for this big bore throttle body and we feel it will be a great addition to the M112 performance lineup. Benefits include more HP & TQ and improved engine sound as well. Greater benefits will be realized on more highly modded vehicles. We recommend doing BBTB if you have basic performance upgrades already on your vehicle. Specs:
Bore: 74mm (18% more surface area)
Plate: Mirror Polished & engraved
Price: $299 + $100 core (but discount available if purchased in addition to our M112 pulley)
And without further ado:
![](http://www.abedinmotorsports.com/bbtb/MBWbbtb1.jpg)
![](http://www.abedinmotorsports.com/bbtb/MBWbbtb2.jpg)
![](http://www.abedinmotorsports.com/bbtb/MBWbbtb3.jpg)
Last edited by AMS Performance; 03-27-2009 at 06:37 PM.
#2
Former Vendor of MBWorld
Thread Starter
And for the record we will try to make an 80MM one for the C32 guys but that will take longer since we will have to machine the entire housing out of solid billet (quite a task to say the least).
#4
Former Vendor of MBWorld
Thread Starter
on avg roughly 5-8HP but if the car is highly modded then you could see 10+ at high rpms (post peak HP). Throttle response is greatly improved as well as engine noise greatly improved. It works very well with intake & exhaust mods (especially if you have headers)
#7
Former Vendor of MBWorld
Thread Starter
Hey guys,
believe me, our company is getting bombarded with requests for new products and we are trying our best to keep up with demand. We will try and come up with a totally new approach for the C32 & C55 BBTBs b/c the current options on the market place just aren't cutting it. In order to do a true 80mm TB that fits well we will have to machine the cores out of solid billet (which needless to say is very time & $$ intensive but it will produce much better results). This will allow for a much stronger thicker wall while still maintaining a true 80mm straight bore and the overall housing size will be as compact if not more compact than the current design. We will keep everyone informed on all our new updates.
~AMS~
believe me, our company is getting bombarded with requests for new products and we are trying our best to keep up with demand. We will try and come up with a totally new approach for the C32 & C55 BBTBs b/c the current options on the market place just aren't cutting it. In order to do a true 80mm TB that fits well we will have to machine the cores out of solid billet (which needless to say is very time & $$ intensive but it will produce much better results). This will allow for a much stronger thicker wall while still maintaining a true 80mm straight bore and the overall housing size will be as compact if not more compact than the current design. We will keep everyone informed on all our new updates.
~AMS~
Trending Topics
#8
Former Vendor of MBWorld
Thread Starter
Hello Everyone,
Just wanted to let everyone know we have a few BBTBs in stock and are incorporating them into our Stage 1.5 performance package. When purchased with our performance crank pulley you will save an additional $50 as well as saving on combined shipping costs.
Thanks
Just wanted to let everyone know we have a few BBTBs in stock and are incorporating them into our Stage 1.5 performance package. When purchased with our performance crank pulley you will save an additional $50 as well as saving on combined shipping costs.
Thanks
#11
Super Member
Join Date: Jul 2004
Location: NE. TN
Posts: 523
Likes: 0
Received 4 Likes
on
3 Posts
06 C350 sport 6MT
have 06 c350 6MT--- m272, please pm me info ie , dyno sheets and any testimonials on crank pulley and throttle body, your website does not address pulley for the m272 specifically, ,, i already have a ecu tune , greens, rez delete,
#14
Former Vendor of MBWorld
Thread Starter
AMS wants to know what most M112 owners would prefer. Would you rather want a polished plate or an annodized plate (of a specific color). I thought I would ask to see what would be the preferred look overall amongst most M112 owners. Thanks for any input.
~AMS~
~AMS~
#17
Member
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)