Camshaft Position Sensor Pictures Needed Please
10-20-2009, 02:18 AM
#1
Member
Thread Starter
Join Date: Sep 2009
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
2006 c230
Camshaft Position Sensor Pictures Needed Please
Please guys if anyone could post some pictures to locate the Camshaft Position Sensor please do. I will never figure out where is it unless i see pictures. Its a 2006 C230, i was searching but i could not find any picture and i'm wondering if i could change it myself and if i should go with the orig from the dealer or if its ok to use the bosch one
10-20-2009, 03:29 AM
#2
MBWorld Fanatic!
Join Date: Aug 2007
Location: Sacramento/San Gabriel/Riverside
Posts: 3,560
Likes: 0
Received 2 Likes
on
2 Posts
01' C32o
Hi,
If you do a quick search, you'll find a official thread for replacing these suckers. There are probably no real pics because the location is very, very tight, and there's no way anyone can stick a camera there. It's a more feel by fingers job.
If you do a quick search, you'll find a official thread for replacing these suckers. There are probably no real pics because the location is very, very tight, and there's no way anyone can stick a camera there. It's a more feel by fingers job.
10-20-2009, 03:57 AM
#3
MBWorld Fanatic!
Actually I saw some really good pics lately and a complete newb posted 'em.
Mighta been on benzworld. I commented how cool it was for a newb to post something like that. Awesome.
Mighta been on benzworld. I commented how cool it was for a newb to post something like that. Awesome.
10-20-2009, 09:27 PM
#5
Super Moderator
Trending Topics
10-21-2009, 06:22 AM
#8
Super Moderator
OK - now you need an OBDII/CAN scanner to tell you which sensor is duff.
Remember
Bank 1 = 1, 2, 3 cylinders (fuel door side/passenger side) OBDII protocol dictates that bank 1 is the bank containing cylinder 1
Bank 2 = 4, 5, 6 cylinders - the drivers side in the US
Inlet cams are centre of V - exhaust cams are obviously exhaust manifold side of each cylinder Bank.
Remember
Bank 1 = 1, 2, 3 cylinders (fuel door side/passenger side) OBDII protocol dictates that bank 1 is the bank containing cylinder 1
Bank 2 = 4, 5, 6 cylinders - the drivers side in the US
Inlet cams are centre of V - exhaust cams are obviously exhaust manifold side of each cylinder Bank.
10-22-2009, 10:41 AM
#10
Super Moderator
P0022 = "A" Camshaft Position - Timing Over-Retarded (Bank 2)
Great! solved
Great! solved
