I was planning on going to a muffler shop and asking them to set up a custom exhaust with one muffler with dual tips, one stretching out to the other side, and possibly taking off the resonator. I know there are people in this forum that have done this with their W203 and was wondering how much I should expect to pay.
Also, check out this rear bumper with carbon fiber rear diffuser: http://cgi.ebay.com/ebaymotors/2001-...Q5fAccessories
Much appreciated!
Also, check out this rear bumper with carbon fiber rear diffuser: http://cgi.ebay.com/ebaymotors/2001-...Q5fAccessories
Much appreciated!
MBWorld Fanatic!
Quote:
Also, check out this rear bumper with carbon fiber rear diffuser: http://cgi.ebay.com/ebaymotors/2001-...Q5fAccessories
Much appreciated!
the rear bumper has not been test fitted yet..Originally Posted by anthonyy
I was planning on going to a muffler shop and asking them to set up a custom exhaust with one muffler with dual tips, one stretching out to the other side, and possibly taking off the resonator. I know there are people in this forum that have done this with their W203 and was wondering how much I should expect to pay.Also, check out this rear bumper with carbon fiber rear diffuser: http://cgi.ebay.com/ebaymotors/2001-...Q5fAccessories
Much appreciated!
Banned
(Dpasokasdlkasjdlkasjdd this has been talked about so many times if people just SEARCH
Quote:
relax Originally Posted by krisv420
(Dpasokasdlkasjdlkasjdd this has been talked about so many times if people just SEARCH
just wondering the cost to expect, and I did search. It's just when I looked through the exhaust thread, i got tired off all the b*tching (such as above) that I just thought it wouldn't hurt to ask. oops.
MBWorld Fanatic!
Hey Anthony,
This all depends on what exhaust you want to go with. I know a high class muffler shop you will be looking at 600 dollars with MagnaFlow exhaust. Since MagnaFlow runs around 300 dollars i'm thinking the shop charges 300 dollars for this job.
At a high class muffler shop = 300 for job
-----------------------------------------
Magnaflow = 300
Remus = 700
eisenmann = 1,200 - 1,300
Those are the price range you should expect to pay.
This is one inlet to dual outlet including mandrel bent. Mandrel bent is better and it's a must so make sure you mention it.
Also since they would be cutting your bumper try to buy a diffuser so they can do the cutout based on that.
Good Luck
This all depends on what exhaust you want to go with. I know a high class muffler shop you will be looking at 600 dollars with MagnaFlow exhaust. Since MagnaFlow runs around 300 dollars i'm thinking the shop charges 300 dollars for this job.
At a high class muffler shop = 300 for job
-----------------------------------------
Magnaflow = 300
Remus = 700
eisenmann = 1,200 - 1,300
Those are the price range you should expect to pay.
This is one inlet to dual outlet including mandrel bent. Mandrel bent is better and it's a must so make sure you mention it.
Also since they would be cutting your bumper try to buy a diffuser so they can do the cutout based on that.
Good Luck
Quote:
This all depends on what exhaust you want to go with. I know a high class muffler shop you will be looking at 600 dollars with MagnaFlow exhaust. Since MagnaFlow runs around 300 dollars i'm thinking the shop charges 300 dollars for this job.
At a high class muffler shop = 300 for job
-----------------------------------------
Magnaflow = 300
Remus = 700
eisenmann = 1,200 - 1,300
Those are the price range you should expect to pay.
This is one inlet to dual outlet including mandrel bent. Mandrel bent is better and it's a must so make sure you mention it.
Also since they would be cutting your bumper try to buy a diffuser so they can do the cutout based on that.
Good Luck
thanks a lot Karo, that's a lot cheaper than I expected with the Magnaflow and that's probably the direction I will go in. Will make sure to mention mandrel bent and the diffuser. thanks again Originally Posted by Karo
Hey Anthony,This all depends on what exhaust you want to go with. I know a high class muffler shop you will be looking at 600 dollars with MagnaFlow exhaust. Since MagnaFlow runs around 300 dollars i'm thinking the shop charges 300 dollars for this job.
At a high class muffler shop = 300 for job
-----------------------------------------
Magnaflow = 300
Remus = 700
eisenmann = 1,200 - 1,300
Those are the price range you should expect to pay.
This is one inlet to dual outlet including mandrel bent. Mandrel bent is better and it's a must so make sure you mention it.
Also since they would be cutting your bumper try to buy a diffuser so they can do the cutout based on that.
Good Luck
MBWorld Fanatic!
Quote:
Sure, Here is Roland's (Rollnnn) setup. I believe he paid 600 for the MagnaFlow and tips.Originally Posted by anthonyy
thanks a lot Karo, that's a lot cheaper than I expected with the Magnaflow and that's probably the direction I will go in. Will make sure to mention mandrel bent and the diffuser. thanks again
https://mbworld.org/forums/3075494-post12.html
Roland is a cool guy so if you have any questions PM him
Super Member
Post up some pix (under car and behind) when you get it done.
MB World Stories
The Best of Mercedes & AMG
Explore
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
MBWorld Fanatic!
Quote:
thats pretty cheap compared to what i had in mind.... Originally Posted by XsuperbeeX
yup its about 600...
MBWorld Fanatic!
that bumper looks pretty bad ***... and its got a pic of it on a black w203...what makes you say its not test fitted?
MBWorld Fanatic!
Quote:
this threadOriginally Posted by maverik259
that bumper looks pretty bad ***... and its got a pic of it on a black w203...what makes you say its not test fitted?
https://mbworld.org/forums/c-class-w...rello-kit.html
start by last page if you want.
It looks nice but is it suitable for a street car?
MBWorld Fanatic!
oh ya i know the morello kit has its issues...i didn't realize this was the rear bumper from it.
Quote:
https://mbworld.org/forums/3075494-post12.html
Roland is a cool guy so if you have any questions PM him
perfect pics thanks!Originally Posted by Karo
Sure, Here is Roland's (Rollnnn) setup. I believe he paid 600 for the MagnaFlow and tips.https://mbworld.org/forums/3075494-post12.html
Roland is a cool guy so if you have any questions PM him
