FS: Brabus shift knob, Door handles, Depo & Eagle Eye projectors, and cheap HID kit.
#1
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2007
Location: Sacramento/San Gabriel/Riverside
Posts: 3,560
Likes: 0
Received 2 Likes
on
2 Posts
01' C32o
FS: Brabus shift knob, Door handles, Depo & Eagle Eye projectors, and cheap HID kit.
Sup guys. Decided to post here since the Classifieds are pretty dead in the interior subforum.
Brabus Illuminated shift knob: $55 shipped
Bought this from Jon Kiamco (JKiamco), who bought it off Nick (C24Owner). It still lights up, although it is kinda dim, and it's obviously used. Reason I'm selling this is because I bought the Brabus R171 knob from Jon (again, lol), so I ain't using this anymore. Comes with Brabus instruction pamphlet.
![](http://i122.photobucket.com/albums/o272/nickj5151/brabus%20shift%20knob/sk2.jpg)
Picture by Nick
Front Pull Handles: $80 shipped
Got two Oyster/Quartz front grab handles; a lot of these get broken, especially if you have a older 203. I try to cut costs and bought an extra 2 hoping it would fit the rear doors, but it didn't. Bit the bullet and bought the rear door handles for about 50$ a side, which is pretty wack because the rears cost more than the fronts. Only opened one of the extras to see if it would fit; it comes with the handle and two mini torx screws. You're supposed to reuse the bigger torx screw at the base of the handle. It's a matching left/right set for the FRONT doors, in OYSTER/QUARTZ color. Not ASH, but Oyster and Quartz. Trying to cut my loss, here's the link to where I got them:
https://www.getmercedesparts.com/mer...***-parts.html
![](http://farm4.static.flickr.com/3321/4556727009_216eb67ce8_o.jpg)
![](http://farm4.static.flickr.com/3236/4557355942_05dfa3756d_o.jpg)
![](http://farm4.static.flickr.com/3432/4557356036_3e56f0d6a4_o.jpg)
![](http://farm4.static.flickr.com/3010/4557356068_26f4bf96f2_o.jpg)
Installed onto the car:
![](http://farm5.static.flickr.com/4028/4556728055_ea9f6f7469_o.jpg)
Good as new!
VNDS Eagle Eye Black Housing Projector Headlights: $180 obo
Here I have my first set of aftermarket projector headlights. These are basically new; I installed and used them for about 2 hours, wasn't feeling it, and went and bought Depos instead. There are some scratches on the lens of the driver's side headlight, and I tried to take as good of a pic as possible. Can easily retrofit these with a better projector, like TSX/S2000/FX-R. I'll include a link to Temjinx's retrofit guide using these headlights. If possible, I would like these picked up, but if no one wants it I'll probably ship it. Includes the dust covers.
Mike (Temjinx) guide:
https://mbworld.org/forums/c32-amg-c...t-project.html
https://mbworld.org/forums/c32-amg-c...-retrofit.html
My retrofit using FX-R projectors into a DEPO headlight:
https://mbworld.org/forums/c-class-w...ro-thread.html
![](http://farm4.static.flickr.com/3500/4557356992_615ebe51c8_o.jpg)
![](http://farm4.static.flickr.com/3185/4556727983_05dd0d2aa8_o.jpg)
![](http://farm4.static.flickr.com/3506/4556727937_568d48f068_o.jpg)
![](http://farm4.static.flickr.com/3642/4557356880_53feb75901_o.jpg)
![](http://farm5.static.flickr.com/4051/4556727879_c06f064875_o.jpg)
![](http://farm4.static.flickr.com/3249/4556727795_338decf17a_o.jpg)
![](http://farm4.static.flickr.com/3315/4557356728_b50a4325ff_o.jpg)
![](http://farm3.static.flickr.com/2715/4557356660_a62bf1fcc8_o.jpg)
![](http://farm4.static.flickr.com/3591/4556727599_a3a4ece64a_o.jpg)
Brabus Illuminated shift knob: $55 shipped
Bought this from Jon Kiamco (JKiamco), who bought it off Nick (C24Owner). It still lights up, although it is kinda dim, and it's obviously used. Reason I'm selling this is because I bought the Brabus R171 knob from Jon (again, lol), so I ain't using this anymore. Comes with Brabus instruction pamphlet.
![](http://i122.photobucket.com/albums/o272/nickj5151/brabus%20shift%20knob/sk2.jpg)
Picture by Nick
Front Pull Handles: $80 shipped
Got two Oyster/Quartz front grab handles; a lot of these get broken, especially if you have a older 203. I try to cut costs and bought an extra 2 hoping it would fit the rear doors, but it didn't. Bit the bullet and bought the rear door handles for about 50$ a side, which is pretty wack because the rears cost more than the fronts. Only opened one of the extras to see if it would fit; it comes with the handle and two mini torx screws. You're supposed to reuse the bigger torx screw at the base of the handle. It's a matching left/right set for the FRONT doors, in OYSTER/QUARTZ color. Not ASH, but Oyster and Quartz. Trying to cut my loss, here's the link to where I got them:
https://www.getmercedesparts.com/mer...***-parts.html
![](http://farm4.static.flickr.com/3321/4556727009_216eb67ce8_o.jpg)
![](http://farm4.static.flickr.com/3236/4557355942_05dfa3756d_o.jpg)
![](http://farm4.static.flickr.com/3432/4557356036_3e56f0d6a4_o.jpg)
![](http://farm4.static.flickr.com/3010/4557356068_26f4bf96f2_o.jpg)
Installed onto the car:
![](http://farm5.static.flickr.com/4028/4556728055_ea9f6f7469_o.jpg)
Good as new!
VNDS Eagle Eye Black Housing Projector Headlights: $180 obo
Here I have my first set of aftermarket projector headlights. These are basically new; I installed and used them for about 2 hours, wasn't feeling it, and went and bought Depos instead. There are some scratches on the lens of the driver's side headlight, and I tried to take as good of a pic as possible. Can easily retrofit these with a better projector, like TSX/S2000/FX-R. I'll include a link to Temjinx's retrofit guide using these headlights. If possible, I would like these picked up, but if no one wants it I'll probably ship it. Includes the dust covers.
Mike (Temjinx) guide:
https://mbworld.org/forums/c32-amg-c...t-project.html
https://mbworld.org/forums/c32-amg-c...-retrofit.html
My retrofit using FX-R projectors into a DEPO headlight:
https://mbworld.org/forums/c-class-w...ro-thread.html
![](http://farm4.static.flickr.com/3500/4557356992_615ebe51c8_o.jpg)
![](http://farm4.static.flickr.com/3185/4556727983_05dd0d2aa8_o.jpg)
![](http://farm4.static.flickr.com/3506/4556727937_568d48f068_o.jpg)
![](http://farm4.static.flickr.com/3642/4557356880_53feb75901_o.jpg)
![](http://farm5.static.flickr.com/4051/4556727879_c06f064875_o.jpg)
![](http://farm4.static.flickr.com/3249/4556727795_338decf17a_o.jpg)
![](http://farm4.static.flickr.com/3315/4557356728_b50a4325ff_o.jpg)
![](http://farm3.static.flickr.com/2715/4557356660_a62bf1fcc8_o.jpg)
![](http://farm4.static.flickr.com/3591/4556727599_a3a4ece64a_o.jpg)
![](http://farm4.static.flickr.com/3553/4557356544_5efb07ae61_o.jpg)
Last edited by Mu9enx; 04-27-2010 at 04:50 AM.
#2
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2007
Location: Sacramento/San Gabriel/Riverside
Posts: 3,560
Likes: 0
Received 2 Likes
on
2 Posts
01' C32o
Used DEPO Black Housing Projectors: $80 obo
Here's my old DEPO headlights that I've been using up until I got my retrofit. It's in pretty crappy shape; I've tried to take the best pics I could of all the little microcracks on the lens. It was caused by the glue on the Lamin-X clear films; I guess the glue was pretty strong to make all these little cracks. It is only cosmetic, it works fine. There are scratches on the inside of the headlight, under the projector, but that is due to the heat of the HID bulbs and cheap paint used for the headlight. Overall, it's in okay condition, and can probably be used as a retrofit headlight. The black housing can be redone if you ever pop off the lens for a retrofit using quality black paint, and it is pretty dirty because I took off the dust covers and a LOT of dust got into the headlight. Again, I'd rather have a local pickup, but if I have to I'll ship it.
![](http://farm5.static.flickr.com/4040/4556727517_fcb7899b84_o.jpg)
![](http://farm4.static.flickr.com/3101/4557356462_34c9b2244b_o.jpg)
![](http://farm5.static.flickr.com/4066/4557356414_3d9d11462a_o.jpg)
![](http://farm4.static.flickr.com/3123/4556727393_306a24f617_o.jpg)
![](http://farm5.static.flickr.com/4068/4557356328_b56e951d68_o.jpg)
![](http://farm4.static.flickr.com/3577/4557356294_35b3acabb3_o.jpg)
![](http://farm4.static.flickr.com/3463/4556727291_af8e8bfb66_o.jpg)
DDM Tuning Slim Ballast 35w HID Kit with 5300K Bulbs: $40 shipped
Bought these from DDM Tuning for over 70 shipped. Bulb/Ballasts are still good, not using them because my new headlights use D2S bulbs. Get em' while it's cheap.
![](http://farm5.static.flickr.com/4047/4556727241_7f7673d478_o.jpg)
Here's my old DEPO headlights that I've been using up until I got my retrofit. It's in pretty crappy shape; I've tried to take the best pics I could of all the little microcracks on the lens. It was caused by the glue on the Lamin-X clear films; I guess the glue was pretty strong to make all these little cracks. It is only cosmetic, it works fine. There are scratches on the inside of the headlight, under the projector, but that is due to the heat of the HID bulbs and cheap paint used for the headlight. Overall, it's in okay condition, and can probably be used as a retrofit headlight. The black housing can be redone if you ever pop off the lens for a retrofit using quality black paint, and it is pretty dirty because I took off the dust covers and a LOT of dust got into the headlight. Again, I'd rather have a local pickup, but if I have to I'll ship it.
![](http://farm5.static.flickr.com/4040/4556727517_fcb7899b84_o.jpg)
![](http://farm4.static.flickr.com/3101/4557356462_34c9b2244b_o.jpg)
![](http://farm5.static.flickr.com/4066/4557356414_3d9d11462a_o.jpg)
![](http://farm4.static.flickr.com/3123/4556727393_306a24f617_o.jpg)
![](http://farm5.static.flickr.com/4068/4557356328_b56e951d68_o.jpg)
![](http://farm4.static.flickr.com/3577/4557356294_35b3acabb3_o.jpg)
![](http://farm4.static.flickr.com/3463/4556727291_af8e8bfb66_o.jpg)
DDM Tuning Slim Ballast 35w HID Kit with 5300K Bulbs: $40 shipped
Bought these from DDM Tuning for over 70 shipped. Bulb/Ballasts are still good, not using them because my new headlights use D2S bulbs. Get em' while it's cheap.
![](http://farm5.static.flickr.com/4047/4556727241_7f7673d478_o.jpg)
![](http://farm4.static.flickr.com/3100/4556727153_a4a8f922d4_o.jpg)
Trending Topics
#10
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2007
Location: Sacramento/San Gabriel/Riverside
Posts: 3,560
Likes: 0
Received 2 Likes
on
2 Posts
01' C32o
The knob is basically normal wear and tear. The chrome is fine, it's just the top leather part of the knob that shows signs of wear. It's kinda difficult to explain, but I'll try to take more pictures of it and post it up in a bit. I should've done it yesterday when I actually had a camera, but I'll see what I can do.
Lol, it's my JDM Drift board with T/A wheels... she's a keeper
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#13
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2007
Location: Sacramento/San Gabriel/Riverside
Posts: 3,560
Likes: 0
Received 2 Likes
on
2 Posts
01' C32o
Thanks Kris!
B Knob is now sold to Abrahm!
Everything else is still available. From now on I'll just take first come first serve, so whoever pays first gets the goods. Thanks Abrahm again! Oh, and please check your school email; I sent the tracking there. Let me know if you need me to send it to another address.
B Knob is now sold to Abrahm!
Everything else is still available. From now on I'll just take first come first serve, so whoever pays first gets the goods. Thanks Abrahm again! Oh, and please check your school email; I sent the tracking there. Let me know if you need me to send it to another address.
#15
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2007
Location: Sacramento/San Gabriel/Riverside
Posts: 3,560
Likes: 0
Received 2 Likes
on
2 Posts
01' C32o
It's something girls love to touch, because it turns them on.
The illuminated B, of course.![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
Eagle Eyes are pending sale to Nate.
Everything else but the Eagle Eyes / B knob are still up for grabs. Shoot me an offer for anything, I'll think about it.
The illuminated B, of course.
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
Eagle Eyes are pending sale to Nate.
Everything else but the Eagle Eyes / B knob are still up for grabs. Shoot me an offer for anything, I'll think about it.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#16
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2007
Location: Sacramento/San Gabriel/Riverside
Posts: 3,560
Likes: 0
Received 2 Likes
on
2 Posts
01' C32o
Eagle Eye headlights are sold to Nate! Thanks for the sale bro, I should hopefully have it packaged up and ready to go by tomorrow. I'll pm you a tracking number. Thanks again!
Guys, still have the door handles, the DEPO headlights, and the HID Kit! These gotta go; I don't want to pay the 20% restocking fee for the door handles! Price drop on the hid kit : $35 shipped for the Slim Ballast H7 kit with 5300k bulbs!
Thanks again Nate and Abrahm.
Guys, still have the door handles, the DEPO headlights, and the HID Kit! These gotta go; I don't want to pay the 20% restocking fee for the door handles! Price drop on the hid kit : $35 shipped for the Slim Ballast H7 kit with 5300k bulbs!
Thanks again Nate and Abrahm.
#18
Super Member
#22
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2007
Location: Sacramento/San Gabriel/Riverside
Posts: 3,560
Likes: 0
Received 2 Likes
on
2 Posts
01' C32o
Thanks for the bump Kris!
Yes, the knob is sold to Abrahm! Let me know when you get it man![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Daily bump! Come on guys, shoot me offers; I won't bite!
Yes, the knob is sold to Abrahm! Let me know when you get it man
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Daily bump! Come on guys, shoot me offers; I won't bite!
#23
Super Member
Join Date: Oct 2006
Location: So Cal
Posts: 679
Likes: 0
Received 0 Likes
on
0 Posts
03 c320
#24
MBWorld Fanatic!
Brabus shift knob back up for sale
I just received the brabus knob today. thanks for the quick shipment!
Unfortunately, I might have to pass this on to someone else. So if anyone is interested in paying the same price of $55 shipped PM me.
thanks,